基于画圆算法的简单弧形贴图算法

本文提出了一种基于画圆算法的简单弧形贴图算法，并分析了该算法的可行性。     

RETARDATION AND REPAIR OF FATIGUE CRACKS BY ADHESIVE INFILTRATION

Abstract— This paper presents results which demonstrate that polymeric filler materials, such as low-viscosity epoxies, can be vacuum-infiltrated into fatigue cracks in 7050 aluminium alloy to produce significant levels of fatigue crack retardation. It was found that the main test variable affecting the degree of retardation was the stress level at which the adhesive was introduced and cured. Two infiltrated adhesives were tested.
Infiltration at 0% (of the original) peak fatigue stress level produced negligible retardation, while infiltration at the 80% stress level produced about 300% increase in fatigue life for one adhesive and 3000% for the other adhesive. For the highest infiltration stress level both crack-face wedging and adhesion contributed initially to the retardation, but the adhesive component ceased after a crack grew through the adhesive to the original crack tip position. The results are discussed in terms of the applicability of the technique to highly-stressed aircraft components.     

浅谈ILLUSTRATOR教学中“外观面板”的用法

在Illustrator教学中,"外观面板"的作用是非常重要的,但在大多数教材中涉及实例及用法太少."外观面板"在对象的样式控制方面有着神奇的功能,"外观面板"中的每一项都是活动的,这意味着你可以随时更改它们。掌握好"外观面板"的使用,可以高效高质量的完成设计任务。     

稀土对ZA27合金阻尼性能的影响

研究了稀土对ZA27合金阻尼性能的影响规律。结果表明：稀土变质可提高ZA27合金的阻尼性能，经稀土变质后的试样，其内耗是未变质的试样的1．4倍。ZA27合金为发挥其阻尼作用，在频率高于70Hz时，效果明显，且经稀土变质后的试样强迫振动衰减效果比未变质的试样强。     

冷却介质对ZG30CrMn2Si2NiMo组织和力学性能的影响

研究了不同冷却介质对ZG30CrMn2Si2NiMo铸钢力学性能及组织的影响.试验结果表明,奥氏体化后空冷ZG30CrMn2Si2NiMo组织为板条贝氏体型铁素体和残余奥氏体组织,奥氏体化后淬火ZG30CrMn2Si2NiMo组织为板条马氏体、贝氏体型铁素体和残余奥氏体组织.ZG30CrMn2Si2NiMo获得板条马氏体、贝氏体型铁素体和残余奥氏体组织时,具有良好的力学性能.     

非调质钢的合金设计与热加工工艺及性能

论述了非调质钢的性能特点，分析了V、Nb、Ti、Mn、Cr、Si等常用合金元素对非调质钢组织和力学性能的影响，并对热加工工艺、热处理等因素个性能的影响作了分析和讨论。     

00Cr17Ni14Mo2不锈钢的性能及应用研究

研究了00Crl7Nil4M02不锈钢材料的机械性能、焊接性能和耐腐蚀性能，从用户和研究开发的角度探讨了其在压力容器、化工装置、化肥装置、海洋装置和建筑业等领域的应用。     

过共晶铝硅合金半固态浆料表观粘度研究

通过自制的双筒旋转粘度计对过共晶ZL117合金的表观粘度进行了研究。结果表明,随着保温温度的降低,即固相率的升高,ZL117合金浆料的表观粘度随之增加;随着搅拌电流的增加,其表观粘度先降低,在搅拌电流为14A左右时达到最低,然后增大;随着冷却速度的增大,其表观粘度增大。     

自粘聚合物改性沥青防水卷材胶粘剂

在SBS改性沥青防水卷材表面涂敷一层自粘性胶粘剂并以隔离纸覆盖，使用时撕掉隔离纸直接粘贴于屋面即可粘接密封牢，不但施工方便而且消除了熔融法施工造成的污染。该胶粘剂由沥青40％～65％，SBS 5％～30％，增粘剂2％～25％和助剂5％～25％构成。胶层具有可塑性、延展性，可自行填补屋面出现的裂缝，保证防水卷材的防水密封效果。     

Numerical Analysis of the Constrained Blister Test

The constrained blister test is investigated through finite element analysis to determine the applicabilities and the limitations of the new technique. Numerical results confirm that the strain energy release rate asymptotically approaches a constant value. These results also show that the test technique and the approximate solution for strain energy release rate are applicable for some practical cases.