In situ polymerization and characterization of polyester‐based polyurethane/nano‐silica composites

Polyester‐based polyurethane/nano‐silica composites were obtained via in situ polymerization and investigated by Fourier‐transform infrared spectroscopy (FTIR), or FTIR coupled with attenuated total reflectance (FTIR‐ATR), Transmission electron microscopy (TEM), atomic force microscopy (AFM), an Instron testing machine, dynamic mechanical analysis (DMA) and ultraviolet‐visible spectrophotometry (UV‐vis). FTIR analysis showed that in situ polymerization provoked some chemical reactions between polyester molecules and nano‐silica particles. FTIR‐ATR, TEM and AFM analyses showed that both surface and interface contained nano‐silica particles. Instron testing and DMA data showed that introducing nano‐silica particles into polyurethane enhanced the hardness, glass temperature and adhesion strength of polyurethane to the substrate, but also increased the resin viscosity. UV‐vis spectrophotometry showed that nano‐silica obtained by the fumed method did not shield UV radiation in polyurethane films. Copyright © 2003 Society of Chemical Industry     

硅表面上的纳米量子点的自组织生长

纳米半导体量子点以其所具有的新颖光电性质与输运特性正在受到人们普遍重视。作为制备高质量纳米量子点的工艺技术 ,自组织生长方法倍受材料物理学家的青睐。而如何制备尺寸大小与密度分布可控的纳米量子点更为人们所注目。因为这是关系到纳米量子点最终能否器件实用化的关键。文中以此为主线 ,着重介绍了各种 Si表面 ,如常规表面、氧化表面、台阶表面以及吸附表面上 ,不同纳米量子点的自组织生长及其形成机理 ,并展望了其未来发展前景     

非晶硅基薄膜的等离子体刻蚀光发射谱检测

本文研究了采用锁定放大相干检测技术的等离子体光发射谱检测系统。用该系统检测了仅用CF4作为刻蚀气体刻蚀非晶硅基薄膜的等离子体光发射谱。分析了检测结果和刻蚀机理。     

基于双秘钥的高强度公钥密码体制的研究

该文研究双秘钥公开钥密码体制,它不同于一般的只有一个秘密密钥的公开钥密钥体制,而是使用两个秘密密钥。要攻破它必须同时解决两个数学难题(素因子分解和求离散对数),从而大大增加了破译难度。     

Pure perceptual-based sequence learning.

Learning a sequence of target locations when the sequence is uncorrelated with a sequence of responses and target location is not the response dimension (pure perceptual-based sequence learning) was examined. Using probabilistic sequences of target locations, the author shows that such learning can be implicit, is unaffected by distance between target locations, and is mostly limited to first-order transition probabilities. Moreover, the mechanism underlying learning affords processing of information at anticipated target locations and appears to be attention based. Implications for hypotheses of implicit sequence learning are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Butyltin Species and Inorganic Tin in Water and Sediment of the Detroit and St. Clair Rivers

Water and sediment samples from 29 locations in the Detroit and St. Clair rivers were analyzed for the highly toxic tri-n-butyltin (Bu₃Sn⁺) species and for the less toxic di-n-butyltin (Bu₂Sn²⁺) and n-butyltin (BuSn³⁺) species and inorganic tin. In general, locations sampled in the St. Clair River were less contaminated with butyltin species than those in the Detroit River. Inorganic tin and BuSn³⁺ were detected in over 90% of all subsurface water samples, while Bu₂Sn²⁺ and Bu₃Sn⁺ were detected in 45 and 28% of the same samples, respectively. The highest concentration ofBu₃Sn⁺ in subsurface water, 5.9 × 10^?10 mol Sn/L, was at the mouth of the Ecorse River, a tributary of the Detroit River. The three butyltin species and inorganic tin were also detected in 23–46% of all sediment samples. The highest concentrations of Bu₃Sn⁺ in sediment were found close to the mouths of the River Rouge, another tributary of the Detroit River, and the Ecorse River, and were 6.2 × I0^–7 and 1.7 × I0^–7 mol Sn/kg dry weight, respectively, for the top 2 cm of sediment.     

Detection of multiple cracks using frequency measurements

A method for detection of multiple open cracks in a slender Euler-Bernoulli beams is presented based on frequency measurements. The method is based on the approach given by Hu and Liang [J. Franklin Inst. 330 (5) (1993) 841], transverse vibration modelling through transfer matrix method and representation of a crack by rotational spring. The beam is virtually divided into a number of segments, which can be decided by the analyst, and each of them is considered to be associated with a damage parameter. The procedure gives a linear relationship explicitly between the changes in natural frequencies of the beam and the damage parameters. These parameters are determined from the knowledge of changes in the natural frequencies. After obtaining them, each is treated in turn to exactly pinpoint the crack location in the segment and determine its size. The forward, or natural frequency determination, problems are examined in the passing. The method is approximate, but it can handle segmented beams, any boundary conditions, intermediate spring or rigid supports, etc. It eliminates the need for any symbolic computation which is envisaged by Hu and Liang [J. Franklin Inst. 330 (5) (1993) 841] to obtain mode shapes of the corresponding uncracked beams. The proposed method gives a clear insight into the whole analysis. Case studies (numerical) are presented to demonstrate the method effectiveness for two simultaneous cracks of size 10% and more of section depth. The differences between the actual and predicted crack locations and sizes are less than 10% and 15% respectively. The numbers of segments into which the beam is virtually divided limits the maximum number of cracks that can be handled. The difference in the forward problem is less than 5%.     

Plasticity of feature-based selection in triple-conjunction search.

Two experiments examined the disruption of feature-based selection in triple-conjunction search at multiple target transfers. In Experiment 1, after 10 training sessions, a new target possessing previous distractor features was introduced. This produced disruption in RT and fixation number, but no disruption in feature-based selection. Specifically, there was a tendency to fixate objects sharing the target's contrast polarity and shape and this did not change even upon transfer to the new target. In Experiment 2, 30 training sessions were provided with three target transfers. At the first transfer, the results replicated Experiment 1. Subsequent transfers did not produce disruption on any measure. These findings are discussed in terms of strength theory, Guided Search, rule-based approaches to perceptual learning, and the area activation model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Series resonant ZCS‐PFM DC‐DC power converter with high‐frequency high‐voltage transformer link for high‐power magnetron drive

This paper presents a single lossless inductive snubber‐assisted ZCS‐PFM series resonant DC‐DC power converter with a high‐frequency high‐voltage transformer link for industrial‐use high‐power magnetron drive. The current flowing through the active power switches rises gradually at a turned‐on transient state with the aid of a single lossless snubber inductor, and ZCS turn‐on commutation based on overlapping current can be achieved via the wide range pulse frequency modulation control scheme. The high‐frequency high‐voltage transformer primary side resonant current always becomes continuous operation mode, by electromagnetic loose coupling design of the high‐frequency high‐voltage transformer and the magnetizing inductance of the high‐frequency high‐voltage transformer. As a result, this high‐voltage power converter circuit for the magnetron can achieve a complete zero current soft switching under the condition of broad width gate voltage signals. Furthermore, this high‐voltage DC‐DC power converter circuit can regulate the output power from zero to full over audible frequency range via the two resonant frequency circuit design. Its operating performances are evaluated and discussed on the basis of the power loss analysis simulation and the experimental results from a practical point of view. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 153(3): 79–87, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20126