Polyimides derived from 1,4‐bis [3‐oxy‐(N‐aminophthalimide)] benzene

A novel diamine, 1,4‐bis [3‐oxy‐(N‐aminophthalimide)] benzene (BOAPIB), was synthesized from 1,4‐bis [3‐oxy‐(N‐phenylphthalimide)] benzene and hydrazine. Its structure was determined via IR, ¹H NMR, and elemental analysis. A series of five‐member ring, hydrazine‐based polyimides were prepared from this diamine and various aromatic dianhydrides via one‐step polycondensation in p‐chlorophenol. The inherent viscosities of these polyimides were in the range of 0.17–0.61 dL/g. These polymers were soluble in polar aprotic solvents and phenols at room temperature. Thermogravimetric analysis (TGA) showed that the 5% weight‐loss temperatures of the polyimides were near 450°C in air and 500°C in nitrogen. Dynamic mechanical thermal analysis (DMTA) indicated that the glass‐transition temperatures (T_gs) of these polymers were in the range of 265–360°C. The wide‐angle X‐ray diffraction showed that all the polyimides were amorphous. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Polyimide–polydimethylsiloxane copolymers for low‐dielectric‐constant and moisture‐resistance applications

Novel, randomly coupled, soluble, segmented polyimide–polydimethylsiloxane (PI–PDMS) copolymers were prepared from aminoalkyl‐terminated polydimethylsiloxane (At–PDMS), 4,4′‐oxydianiline diamine, pyromellitic dianhydride, and 4,4′‐diphenylmethane diisocyanate (MDI). When At–PDMS was introduced into the polyimide chain, the polyimide copolymers exhibited lower dielectric constants and better moisture resistance and mechanical properties. The reductions in the dielectric constant of the PI–PDMS copolymers could be attributed to the incorporation of polydimethylsiloxane (PDMS) into the polyimide chain and the nanopores in the film generated by carbon dioxide evolvement during the reaction. The lowest dielectric constant was 2.58 with 25 wt % PDMS and 5 wt % MDI. In addition, the water contact angles of the resultant copolymers increased from 51 to 109° when the contents of PDMS increased from 0 to 25 wt %. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and properties of aromatic polyimide,poly(benzoxazole imide), and poly(benzoxazole amide imide)

Two series of heterocyclic aromatic polymers were synthesized from 4,4′‐(4,4′‐isopropylidenediphenoxy)bis(phthaltic anhydride) and 2,2′‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride by two‐step method. The inherent viscosities were in the range of 24–45 cm³/g. The effects of the rigid benzoxazole group in the backbone of copolymer on the thermal, mechanical, and physical properties were investigated. These polymers exhibit good thermal stability. The temperatures of 5% weight loss (T₅) of these polymers are in the range of 403–530°C in air and 425–539°C in nitrogen. The chard yields of these polymers are in the range of 15–24% in air and 54–61% in nitrogen. These polymers also have high glass‐transition temperatures and a low coefficient of thermal expansion and good mechanical properties. The poly(benzoxazol imide) has a higher tensile strength and modulus than those of neat polyimide. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

The Mechanical Behaviour of Polyimide/Copper Laminates Part 2: Peel Energy Measurements

The mechanical peel behaviour of laminates consisting of polyimide films adhered to copper foil using a modified acrylic adhesive has been studied over a wide range of test rates and temperatures. The laminates were prepared from polyimide films which had been subjected to either a “high-thermal history” or a “low-thermal history” treatment during the production of the film. The measured peel energies of the laminates could be superimposed to give a master curve of peel energy versus the reduced rate of peel test, Ra_T, where R is the rate of peel test and a_T is the time-temperature shift factor. The appropriate shift factors were a function of the test temperature and were mainly deduced from tensile tests conducted on the bulk adhesive. The “high-thermal history” laminates gave higher peel energies and the locus of failure of the laminates was mainly by cohesive fracture through the adhesive layer. At low values of log₁₀ Ra_T, i.e. Low rates of peel and high test temperatures, the “low-thermal history” laminates also failed in the adhesive layer and possessed similar peel energies to those measured for the “high-thermal history” laminates. However, at high log₁₀ Ra_T values, the peel energies measured for the “low-thermal history” laminates were lower and showed a wider scatter. These arose from a different locus of failure occurring in these “low-thermal history” laminates when tested under these conditions. Namely, it was found that most of these laminates failed in a weak boundary layer in the outer regions of the “low-thermal history” polyimide film.     

Step-growth polymerization and ‘click’ chemistry: The oldest polymers rejuvenated

Since its discovery in 2001, copper catalyzed azide-alkyne ‘click’ chemistry has been extensively used in polymer chemistry to modify polymeric materials and create advanced polymer structures by efficient coupling reactions. Surprisingly, the contribution of this Huisgen cycloaddition reaction to industrially important commodity polymers, prepared by step-growth polymerization, was not existing until recently. Nevertheless, since many decades academic and industrial research was focused on finding attractive synthetic pathways to introduce large contents of different reactive functional groups in several polymer classes such as polyesters and polyurethanes. Because of the high tolerance of azide-alkyne coupling reactions to a wide variety of functional groups and to extreme reaction conditions often used in step-growth polymerizations, the straightforward synthesis of alkyne-containing building blocks created an ideal platform to modify and broaden the physico-chemical properties of step-growth polymers by choosing readily available low and high molecular weight azide components. This feature article provides a comprehensive review covering the strategies toward ‘click’-functionalization of several classes of industrially important step-growth polymers.     

新型含吡啶环二胺及其可溶透明性氟化聚酰亚胺的合成与表征

以4-三氟甲基苯甲醛和3-(4-硝基苯氧基)苯乙酮(m,p-NPAP)为原料,通过改进的Chichibabin反应制备了硝基化合物4-(4-三氟甲基苯基)-2,6-双[3-(4-硝基苯氧基)苯基]吡啶(m,p-3FPNPP),再用Pd/C和水合肼将m,p-3FPNPP进行还原,成功制备了一种新型含吡啶环的芳香二胺4-(4-三氟甲基苯基)-2,6-双[3-(4-胺基苯氧基)苯基]吡啶(m,p-3FPAPP)。以m,p-3FPAPP作为二胺,3,3′,4,4′-二苯醚四羧酸二酐(ODPA)作为二酐,N,N-二甲基甲酰胺(DMF)为溶剂,通过常规的两步法,经热或者化学亚胺化形成聚酰亚胺,制得了一种新型的含吡啶环聚酰亚胺。所得聚酰胺酸和聚酰亚胺的粘度分别为0.78 dL/g和0.65 dL/g。化学亚胺化所得的聚酰亚胺速溶于常见有机溶剂如DMF、N,N-二甲基乙酰胺(DMAc)、N-甲基-2-吡咯烷酮(NMP)、四氢呋喃(THF)等。制得了柔韧的聚酰亚胺膜,膜有很好的热稳定性,玻璃化转变温度(Tg)为234.4℃,氮气氛中10%失重温度为575.3℃,膜有很好的光学透明性,截止波长为369 nm,同时,膜还有较好的力学性能,拉伸强度为96.4 MPa,拉伸模量为1.63 GPa,断裂伸长率为9.2%,膜的吸水率为0.68%。     

脂肪族聚酯的合成及降解性能研究

通过熔融和溶液结合法合成了脂肪族聚酯—聚丁二酸丁二醇酯(PBS)、丁二酸丁二醇酯-己二酸丁二醇酯共聚物(P(BS-co-BA))和丁二酸丁二醇酯-癸二酸丁二醇酯共聚物(P(BS-co-BSe)),并对其进行了生物降解实验。采用GPC测定了脂肪族聚酯的分子量及其分布,并采用熔点仪测定了聚酯的熔点。得到脂肪族聚酯分子量、熔点以及分子结构对称性和降解之间的关系。     

Synthesis and properties of soluble fluorinated poly(ether imide)s with different pendant groups

Two types of new fluorinated diamine monomer, [1,4-(4-amino-2-trifluoromethyl-phenoxy)-2-(3′-trifluoromethylphenyl) benzene (III)] and [1,4-(4-amino-2-trifluoromethyl-phenoxy)-2-(3′-methylphenyl) benzene (IV)] were synthesized and polymerized with aromatic dianhydrides. A series of soluble poly(ether imide)s (PEIs) were prepared from the diamines and dianhydrides by two-step chemical imidization methods. Experimental results indicated that all the PEIs had glass transition temperature between 230 °C and 247 °C, the temperature at 5% weight loss between 527 °C and 598 °C under nitrogen. The membranes hand tensile strengths in the range of 74-101 MPa, tensile modulus in the range of 1.9-2.6 GPa, and elongation at break from 20 to 28%. The cast membranes also exhibited high optical transparency, with a UV-vis absorption edge of 354-406 nm. Moreover, these PEIs membranes possessed low dielectric constants of 2.63-3.20 (at 1 MHz) and low water uptakes (<0.75 wt%).     

Enrichment of pomace olive oil in triterpenic acids during storage of “Alpeorujo” olive paste

Triterpenic acids are natural compounds present in plants and foods with beneficial properties for human health and thus they are desirable in the food, cosmetics and pharmaceutical industries. Pomace olive is considered a good source of these substances. In this study, oleanolic and maslinic acids were found to be the main triterpenic acids identified in pomace olive oil obtained from stored “Alpeorujo”. Determination of the two acids was achieved by a new procedure that consists of extracting the acids from the oil with a mixture of methanol/ethanol, and then separating and quantifying them by HPLC. Results showed that their concentration increased up to 16 g/kg of oil during storage of the pomace in large ponds for 7 months. The concentration of both triterpenic acids was similar in the pomace olive oil obtained by using the centrifugation system. By contrast, a much lower concentration of maslinic than oleanolic acid was detected in pomace olive oils obtained by solvent extraction from the previously centrifugated “Alpeorujo” paste. These triterpenic acids also contributed to the acidity of the crude oil. Likewise, the oil of the pomace paste was enriched in other substances such as 4‐ethylphenol and aliphatic alcohols during the storage of the paste in large ponds. Consequently, crude pomace olive oil can be considered a good source of triterpenic acids when obtained from a stored olive paste.     

Tribological behavior of short‐fiber‐reinforced polyimide composites under dry‐sliding and water‐lubricated conditions

Polyimide composites reinforced with short‐cut fibers such as carbon, glass, and quartz fibers were fabricated by the polymerization of monomer reactants process. The mechanical properties of the composites with different fiber contents were evaluated. The friction and wear properties of the polyimide and its composites were investigated under dry‐sliding and water‐lubricated conditions. The results indicated that the short‐carbon‐fiber‐reinforced polyimide composites had better tensile and flexural strengths and improved tribological properties in comparison with glass‐fiber‐ and quartz‐fiber‐reinforced polyimide composites. The incorporation of short carbon fibers into the polyimide contributed to decreases in the friction coefficient and wear rate under both dry and water‐lubricated conditions and especially under water lubrication because of the boundary lubrication effect of water. The polyimide and its composites were characterized by plastic deformation, microcracking, and spalling under both dry and water‐lubricated conditions, which were significantly abated under the water‐lubricated condition. The glass and quartz fibers were easily abraded and broken; the broken fibers transferred to the mating metal surface and increased the surface roughness of mating stainless steel, which led to the wear rate increasing for the glass‐fiber‐ and quartz‐fiber‐reinforced polyimide composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008