Assessment of the relative agronomic effectiveness of phosphate rocks under glasshouse conditions

Six phosphate rocks (PRs) of varying reactivities were compared with monocalcium phosphate (MCP) in a glasshouse experiment growing perennial ryegrass (Lolium perenne cv. Nui) as the test plant on four soils of contrasting P sorption capacity and exchangeable Ca. The cumulative dry matter yield over 10 harvests showed a significant response to P application in all soils. Based on relative yield and P uptake, MCP was the most effective P fertilizer followed by the reactive phosphate rocks, which were superior to the unreactive rocks in all soils. The relative agronomic effectiveness (RAE) and substitution ratio (SR) of individual PR fertilizers, calculated with respect to MCP using the methods of vertical and horizontal comparison, respectively, were similar over a range of fertilizer rate. There was a decline or slight increase in the performance of PRs with time in the low P sorption soils but a consistent increase in the high P sorption soils. Some initial influence of exchangeable Ca content of the soils on the relative performance of PRs was also observed. Generally the PRs performed better in high P sorption soils than low P sorption soils and in low exchangeable Ca soils than high exchangeable Ca soils.     

Mechanistic investigation of hydrogen-enhanced anodic dissolution of X-70 pipe steel and its implication on near-neutral pH SCC of pipelines

The effects of hydrogen-charging on anodic dissolution of pipe steel under near-neutral pH condition were studied by electrochemical techniques. Hydrogen-charging enhances the anodic dissolution rate of the steel. The hydrogen-enhanced dissolution increases with increasing charging current density. The hydrogen effect is attributed to the alteration of chemical potential and exchange current density of steel. Hydrogen-charging affects the corrosion process of the steel. In particular, at a high charging current density, a layer of corrosion product forms on the electrode surface to change corrosion potential and interfacial double-charge layer capacitance as well as charge-transfer resistance. The hydrogen effect factor for enhanced anodic dissolution of steel at an anodic potential of −0.4 V (SCE) is 1.53 only. Hydrogen-enhanced anodic dissolution of steel by itself may not be the major factor contributing to the high rate of crack growth in pipe steel in near-neutral pH electrolyte. A further investigation of the synergistic effect of hydrogen and stress on dissolution at the crack-tip is essential to determine the mechanism of near-neutral pH stress corrosion cracking of pipelines.     

Role of metal ion impurities in generation of oxygen gas within anodic alumina

The generation of oxygen gas within an amorphous anodic alumina film is reported. The film was formed by anodizing aluminum, which was first electropolished and then chemically polished in CrO₃-H₃PO₄ solution, in sodium tungstate electrolyte. The procedure results in incorporation of mobile Cr³⁺ species, from the chemical polishing film, and mobile W⁶⁺ species, from the electrolyte, into the amorphous structure. The tungsten species are present in the outer 27% of the film thickness, while Cr⁶⁺ species occupy a thin layer within the tungsten-containing region. Above the Cr³⁺ containing layer, a band develops that contains oxygen bubbles of a few nanometres size. The oxygen is generated by oxidation of O²⁻ ions of the alumina. A mechanism of oxygen generation within the alumina is proposed based on the electronic band structure of the oxide, modified by the Cr³⁺ and W⁶⁺ species, and on the ionic transport processes during oxide growth.     

Cyclic oxidation processes during anodizing of Al-Cu alloys

The influence of copper on the morphologies of porous anodic alumina has been investigated under current and voltage control using a sputtering-deposited Al-2.7 at.% Cu alloy and a commercial AA 2024-T3 aluminium alloy anodized in either sulphuric acid electrolyte or the same electrolyte but with addition of tartaric acid. The findings indicate that film development involves repeated formation of embryo cells of anodic alumina at the metal/film interface. During the initial stages of anodizing at constant voltage, cell formation is accompanied by current peaks in the current-time response. The porosity of the resultant films has a lateral aspect due to the layering of embryo cells. The thickness of individual layers is proportional to the formation voltage, with a ratio of the order 1 nm V⁻¹. The cell formation is accompanied by enrichment of copper in the alloy, incorporation of copper species into the anodic film, in low amounts relative to the alloy, and evolution of oxygen. These processes disrupt the formation of the classical pore morphology, characteristic of high purity aluminium, due to continuous formation of fresh embryo cells and re-direction of pores. The main effect of the tartaric acid addition to the sulphuric acid was to reduce the rate of anodizing of the alloys at constant voltage by about 10-20%.     

Anodic dissolution of spongy titanium in ethanol solution for preparation of nano-sized TiO2 powder

Nano-sized TiO₂ powder was prepared by electrochemical dissolution of spongy titanium in an ethanol solution following direct hydrolysis of the electrolyte solution. Characterization of the electrochemical product revealed that Ti(OEt)₄ was formed by anodic dissolution of spongy titanium in ethanol solution. X-ray diffraction and transmission electron microscope were, respectively, used to investigate the structure of TiO₂. This study showed that nano-sized TiO₂ prepared by this method has a structural and thermal stability with a narrow size distribution of 5-10 nm. The optimum electrochemical operating conditions established were a temperature of 333-343 K, current density of 400 A m⁻² and faradaic efficiency of 86%. Experiments showed that this process might be recommended as a promising technique for synthesis of nano-sized powder.     

Hyperbranched Polymers Containing Cyclopentadienyliron Complexes

A number of hyperbranched polymers containing cyclopentadienyliron moieties were prepared using the A₂+B₃ method. The A₂ compounds used were common diols, dithiols or dichloroarenecomplexes. B₃ compounds included either prepared star-shaped molecules or a purchased triol. The effect of the reaction conditions on the properties of the products was probed. Analysis of the prepared polymers was conducted using ¹H and ¹³C NMR, viscometry, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Viscometry values were generally found to be low, in the range of 0.175–0.300 dl/g. TGA showed losses starting at approximately 230°C and ending at 280°C, corresponding to the decomposition of the cyclopentadienyliron moiety. Degradation of the polyether backbone was found to occur starting at 390–567°C. Glass transition temperatures were found to be between 60 and 134°C, whereas melting temperatures ranged from 155 to 190°C.     

Anodic, cathodic and cyclic voltammetric deposition of ruthenium oxides from aqueous RuCl3 solutions

Anodic, cathodic and cyclic voltammetric (CV) deposition of ruthenium oxides from aqueous RuCl₃ solutions have been investigated using stationary and rotating disk electrodes (RDE) in this work. The CV deposition behavior was examined using a RDE to differentiate the contribution of current from the reactions of ruthenium ions in the electrolyte and ruthenium oxides already adsorbed on the electrode. The results indicate that the CV growth of ruthenium oxides within the potential range of aqueous electrolyte decomposition is attributed to the anodic oxidation of ruthenium ions in the electrolyte. Cathodic deposition occurs only at potential negative than −0.30 V versus saturated calomel electrode (SCE) when H₂ evolves on the electrodes. Anodic deposition of ruthenium oxides can be obtained effectively in the potential range of ca. 0.9-1.1 V versus SCE, depending on the pH value of the electrolyte. The optimum anodic and cathodic deposition potential for maximum deposition efficiency is 1.0 and −0.9 V versus SCE, respectively, in the electrolyte solution of pH 2.     

Bromine addition and successive amine substitution of mesoporous ethylenesilica: Reaction, characterizations and arsenate adsorption

Bromination and subsequent ethylenediamine substitution of the CC double bond in mesoporous ethylenesilica were carried out to explore the characteristics of this periodic mesoporous organosilica. The structures of the products (BrPMO and EDA–BrPMO, respectively) were analysed by IR, Br K-edge EXAFS and NMR spectroscopies, as well as X-ray diffraction and nitrogen adsorption. We showed (1) that the formulae of the two products that formed were [CHBrSiO_1.5]_0.45[CHSiO_1.5]_0.55 and [NH₂CH₂CH₂NHCHSiO_1.5]_0.05 [CHBrSiO_1.5]_0.40[CHSiO_1.5]_0.55, respectively, (2) that the addition of Br₂ at room temperature occurred on the CC double bonds with disturbing the framework structure, (3) that IR absorption band of CC bonds that reacted with Br₂ is significantly different from that of inactive CC bond, (4) that the length of the C–Br bond was considerably longer than in conventional alkyl bromides, and (5) that a large proportion of the ν(C–Br) band remained at the same position in the IR absorption spectrum after the ethylenediamine (EDA) substitution, while a new ν(C–Br) absorption also appeared. The mechanisms of these reactions are discussed at both the micro and mesoscopic levels.

Arsenate adsorption on EDA–BrPMO, in which the EDA is directly bound to the “surface” of the mesopores, was compared with adsorption on EDA–Pr–PMO, which was prepared by the direct synthesis of 3-chloropropyl-functionalized mesoporous ethanesilica followed by the substitution of Cl with EDA. The strength of the adsorption, as measured with the distribution coefficient, was greater for the former adsorbent than the latter. The origin of this difference was attributed to the distance between amino group and the surface.     

基于图像位平面分解的混沌加密方法研究

为提高图像加密效果,可结合混沌理论、位平面分解理论以及灰度置乱理论,获得一种加密新方法,即先对置乱后的图像进行位平面分解,再针对不同位平面使用不同的混沌加密密钥进行加密。仿真分析显示,此加密方法简单有效,密钥空间巨大,加密效果明显,安全性高。     

离子液体中均相合成N-乙酰化壳聚糖及其性能研究

合成了对壳聚糖溶解效果好、可重复使用的离子液体氯化2-氨基乙酸[Gly]Cl,用1H NMR和FT-IR对其结构进行了确定。在制得的离子液体水溶液中,制备了水溶性N-乙酰化壳聚糖。用XRD和FT-IR对产物进行了结构表征。通过单因素实验得到了较佳反应条件:n(乙酸酐)∶n(壳聚糖)=2.75∶1,反应温度60℃,反应时间5 h。并对产物的吸湿保湿性能进行初步研究,结果表明,产物具有良好的吸湿保温性能。还考察了离子液体的重复使用性能,重复使用3次后,N-乙酰化壳聚糖的取代度仍大于89%。