新型硅改性丙烯酸酯压敏胶的研究

MQ硅树脂可用作改性聚丙烯酸酯类压敏胶,在保持较好力学性能(初粘性、持粘性和剥离强度)和绝缘性的同时,可较大地提高硅改性压敏胶的耐高温性能。MQ树脂的结构和压敏胶的性能用29Si-NMR,DSC,粘性等表征。MQ硅树脂含量对硅改性压敏胶性能影响极大,通常MQ硅树脂用量为(0.3～0.5)%时具有较好的综合性能。该压敏胶粘剂可以直接涂布于经电晕处理的聚酯膜制备压敏胶粘带,便于工业化生产。     

Zinc Coated Steel/Epoxy Adhesive Systems: Investigation of the Interfacial Zone by FTIR Spectroscopy

The present study takes advantage of the ability of Fourier Transform Infrared Spectroscopy (FTIR) for the analysis of ultrathin organic films on metals. FTIR in the reflection mode (IRRAS) is used in order to study the interaction of ultrathin films of dicyandiamide (hardener of most one-pack epoxy resins) with various substrates, model ones such as gold or zinc and industrial ones such as steel and zinc-coated steels.

Pure zinc surfaces and, to a lesser extent, zinc-coated steels are shown to react with dicyandiamide after heating at 180°C, as evidenced by the frequency shift of the absorption band (at about 2200 cm^-1) characteristic for nitrile groups. As real systems consist of thick layers of a fully formulated adhesive cured onto a metallic substrate, the direct investigation of such a buried interphase is no longer possible by FTIR and by most of the known spectroscopies. Some mechanically tested specimens are then analysed, after failure, by FTIR microspectrometry. The spectra obtained, corresponding to the fracture initiation zone which is about 100 μm in diameter, advocate for the presence of an ultrathin layer of modified polymer still covering the substrate.     

The Interlaminar Bond Strength of Flexible Polymer-Metal Laminates

An alternative test method to the traditional 180° “T” peel test has been developed for the measurement of interlaminar bonding in three-ply (polyester/aluminium/polypropylene) flexible-packaging, laminate materials. The new test is thought to involve mixed mode I (opening) and mode II (shearing) failure, and takes into account the yielding of the polypropylene layer during testing. The method allows more direct comparisons between materials to be made, and allows the measurement of strong bonds, where a peel test would result in yield or fracture of the substrate arms before debonding.     

软段含离子基团的阴离子型水性聚氨酯胶粘剂的研究(Ⅱ)——硬段结构的影响

以含有不同离子基团的聚酯多元醇为软段,采用丙酮法合成了一系列水性聚氨酯乳液。研究了不同硬段结构和硬段含量和扩链剂对其干膜物理机械性能和吸水率的影响。     

高强度快干变性淀粉粘合剂的研究及在纸制品包装中的应用

本文介绍了高强度快干变性淀粉的制备原理和工艺,以及用该变性淀粉调配瓦楞纸板用粘合剂的方法和应用情况。讨论了变性淀粉粘合剂的初粘力,干燥速度等并与普通淀粉粘合剂作了比较。     

粘接制动蹄用耐高温胶粘剂及其粘接性

介绍一种新型酚醛－－丁腈并用耐高温高强度单组分浆状结构胶粘剂和组成比例以及固化条件对粘接强度的影响，该胶适用于粘接刹车制动蹄和飞机轻金属结构等。     

水性聚氨酯胶粘剂的研制

以低聚物多元醇、二异氰酸酯和二羟甲基丙酸为主要原料制备了一种阴离子水性聚氨酯胶粘剂。探讨了不同种类的多元醇和异氰酸酯对预聚体的合成和乳液性能的影响,实验中发现用三乙胺做中和剂时存在着一个临界浓度。选用多种助剂最后配制得到了综合性能优良的水性聚氨酯胶粘剂。     

快固化淀粉粘合剂的研究

介绍了快固化玉米淀粉粘合剂的制备工艺,对制备参数进行了优化,可使粘合剂的初粘速度和干燥速度显著提高。     

聚醋酸乙烯乳液缩醛化的改性研究

本文介绍了为提高聚醋酸乙烯乳液稳定性、耐水性和防冻性而进行缩醛化改性的原理，并确定了最佳工艺条件即甲醛与聚乙烯醇的配比为０．４５～０．５０。     

Experimental Investigation of Epoxy Bonded Polymethylmethacrylate Joints

This paper presents an experimental investigation into various aspects of epoxy-bonded polymethylmethacrylate (PMMA) and PMMA-to-aluminium joints. The effects of adhesive thickness, overlap area, surface roughness, and environmental exposure on the joint strength were studied. Results indicated that the joint strength was not directly proportional to the overlap area, while sanding had a positive effect on the joint strength. A negative effect was observed when adhesive thickness was increased. The fatigue behaviour of adhesively-bonded joints under dynamic loading was found to be independent of frequency, for the range of values tested; however, it was dependent on the test temperature with greater reduction in fatigue life observed in PMMA-to-aluminium joints at higher temperature. Empirical equations from which the fatigue life of joints can be predicted were obtained by regression analysis. Intermittent fatigue testing of the joints was also performed. The epoxy adhesive tested proved to be a satisfactory choice for outdoor exposure. The rate of degradation of the adhesive was slow with the adherend itself degrading at a faster rate than the adhesive or the bondline.