Films and fibers of oriented single wall nanotubes

As-produced nanotubes form a light, fragile and isotropic soot. Different efforts are made to process nanotubes into macroscopic forms of more practical use and more controlled properties. We briefly review in this paper two methods recently proposed to make films of magnetically aligned nanotubes and fibers by using an electrophoretic method. Preferential orientation of the nanotubes in the plane of the films or along the fiber axis is an important feature of the obtained materials. Then we describe in details a different, spinning like, process for making fibers out of single wall carbon nanotubes. This process consists of dispersing the nanotubes in a surfactant solution, re-condensing the nanotubes in the flow of a polymer solution to form a nanotube mesh, and then collating this mesh to a nanotube fiber. The behaviors of the surfactant-stabilized dispersions, which are also presented, are critical for this process. The degree of nanotubes alignment in dried fibers has been characterized by X-ray scattering. It is found to be smaller than the alignment obtained in the previous materials. However, the processing is simpler and faster and potentially scalable for large-scale production.     

PAN共聚纤维的热氧化研究

本工作采用连续式实骏装置与方法,借助力学测试、X射线衍射、元素分析、红外光谱等技术,系统地研究了PAN共聚纤维在连续热氧化过程中化学、结构、性能间的联系,亦对PAN基碳纤维力学性能提高的途径进行了探讨。研究结累表明:在热氧化过程中,PAN共聚体系的热化学反应主要发生在250℃左右;其间纤维的序态结构变化剧烈,易使纤维产生结构缺陷,进而影响热氧化纤维力学性能的变化。     

0.64BaTi4O9-0.36BaEu2Ti4O12/BaTi4O9纤维复合陶瓷的相结构研究

利用XRD，XPS和TEM等测试手段对0.64BaTi4O9-0.36BaEu2Ti4O12/BaTi4O9纤维复合陶瓷新材料的相结构进行了研究。研究结果表明：随着BaTi4O6纤维的加入，烧结试样表面O元素的含量提高，材料中Ti^3 离子和Ti^2 离子的含量降低，材料介电性能有所提高。     

改性玻纤增强尼龙610,1010塑料

研究了采用(准)中粘度级尼龙做基体树脂,加入成核剂改善尼龙的结晶过程,提高结晶速率和初始熔融温度;添加光、热氧稳定剂,防止尼龙在成型加工和使用过程中产生降解与老化,提高塑料制品的质量和减少性能的分散性;采用合理的工艺条件,确保添加剂的均匀分散与减少玻纤的磨损,得到适于军工、航空和机电等领域需要的高性能的受力结构工程塑料。     

Water‐soluble/dispersible cationic pressure‐sensitive adhesives. I. Adhesives from solution polymerization

Pressure‐sensitive adhesives (PSAs) have long been a problem as sticky contaminants for paper recycling mills. The main problem associated with such stickies is that the PSAs in the waste papers deposit on the felts, press rolls, and drying cylinders of paper machines, and this creates problems with paper formation, reducing the paper quality and paper machine runnability. The annual cost of stickies to the U.S. paper industry is estimated to be about $600,000,000–650,000,000. To solve this problem, a series of cationic water‐soluble/dispersible PSAs have been synthesized by the free‐radical solution polymerization of butyl acrylate and [3‐(methacryloylamino)propyl]trimethylammonium chloride in ethanol. The PSA end‐use properties, repulpability in paper recycling, and the effects on the properties of recycled paper products have been studied. The cationic PSAs can be dissolved or dispersed in water if the cationic charge density in the PSA backbone is controlled, and so they do not deposit as stickies during recycling and papermaking processes. Because the PSAs are cationically charged, they can easily be removed from the papermaking system by adsorption onto the negatively charged fibers and fine surfaces. Furthermore, the adsorbed colloidal or dissolved PSAs have little effect on the final paper properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1624–1630, 2003     

Theoretical Analysis of the Fiber Pullout and Pushout Tests

The fiber pullout and pushout tests have been analyzed to predict the load-displacement behavior in terms of fiber/matrix interface parameters. The effects of residual axial strain in the fiber and fiber surface topography were included. The residual axial strain was found to be a significant parameter. It is shown that the interface failure can be progressive or catastrophic. In the case of a progressive failure of the interface, the load-displacement curve is nonlinear. The portion of the curve from above the first nonlinearity to near the peak load can be predicted in terms of parameters of the interface, viz., the friction coefficient, the radial stress at the interface, the fracture toughness of the interface, and the residual axial strain in the fiber. Values for these parameters can be obtained from a single loaddeflection curve. The peak load and load drop, which are usually reported, are found not to be directly relatable to any interface property, since the length of the last portion of the fiber to debond is influenced by end effects and hence not easily predicted. However, for data which describe the peak load as a function of initial embedded length, that factor can be eliminated and the data reduced to yield the relevant interface parameters. In pullout, the peak and friction loads saturate with large specimen thickness. Catastrophic failure is favored when the debond initiation load is high or when residual stress is low. Finally, a methodology to extract interface parameters from experimental data is suggested.     

Works of adhesion at the carbon fiber-liquid interface determined using a modified wetting technique

Works of adhesion W_SL between aqueous solutions with pH values in the range from 1 to 14 and carbon fibers from different sources, which were additionally treated in an inert atmosphere or in oxygen, were measured by use of a microbalance. These works of adhesion W_SL were found to show distinct stepwise dependencies on the pH value. The works of adhesion W_SL are attributed to dispersion interactions W_SL¹ and various acid-base interactions w_sl^ab—in the latter case between the acidic and basic surface groups of carbon and the various basic and acidic aqueous solutions.     

Asbestos replacement aspects: Modification of the fibre-matrix interphase in lonomer based composites

Asbestos fibres, of the chrysotile variety, and chopped carbon fibres were pretreated by an in-situ polycondensation technique eventually resulting in a polyamide coating on the fibre surface. Ionomer based composites containing either carbon or asbestos fibres in random in plane fibre orientation were prepared, and the influence of this coating process on the tensile properties was investigated. It was found that for the asbestos-filled composites the presence of the nylon 6,6 interlayer improves the tensile performance, especially at moderate polyamide depositions. This is not the case with the pretreated carbon-filled composites for which carbon fibres with higher polyamide contents are preferred. Combinations of the treated asbestos fibres with carbon and/or aramid fibres may be used to reduce the asbestos content in asbestos-only based engineering plastics.     

Fabrication of Arsenic Sulfide Optical Fiber with Low Hydrogen Impurities

Arsenic sulfide glass optical fibers typically possess extrinsic absorption bands in the infrared wavelength region associated with residual hydrogen and oxygen related impurities, despite using purified precursors. We report a purification process based on the addition of tellurium tetrachloride (TeCl₄) to the glass. During melting, the chlorine from TeCl₄ reacts with the hydrogen impurities to produce volatile products (e.g., HCl) that can be removed by subsequent dynamic distillation. The processing conditions have been modified accordingly to produce optical fibers with significantly reduced loss due to hydrogen sulfide impurity content (1.5 dB/m).     

Comparison of the toughening behavior of nylon 6 versus an amorphous polyamide using various maleated elastomers

The toughening effect of two types of elastomers based on ethylene/α-olefin copolymers, viz, an ethylene/propylene copolymer (EPR) with its maleated version, EPR-g-MA, and an ethylene/1-octene copolymer (EOR) with its maleated versions, EOR-g-MA-X% (X=0.35, 1.6, 2.5), for two classes of polyamides: semi-crystalline nylon 6 versus an amorphous polyamide (Zytel 330 from DuPont), designated as a-PA, was explored. The results are compared with those reported earlier based on a styrenic triblock copolymer having a hydrogenated midblock, SEBS, and its maleated version, SEBS-g-MA, elastomer system. Izod impact strength was examined as a function of rubber content, rubber particle size and temperature. All three factors influence the impact behavior considerably for the two polyamide matrices. The a-PA is found to require a somewhat lower content of rubber for toughening than nylon 6. Very similar optimum ranges of rubber particle sizes were observed for ternary blends of EOR-g-MA/EOR with each of the two polyamides while blends based on mixtures of EPR-g-MA/EPR and SEBS-g-MA/SEBS (where the total rubber content is 20% by weight) show only an upper limit for a-PA but an optimum range of particle sizes for nylon 6 for effective toughening. Higher EPR-g-MA contents lead to lower ductile-brittle transition temperatures (T_db) as expected; however, a-PA binary blends with EPR-g-MA have a much lower T_db than do nylon 6 blends when the content of the maleated elastomer is not high. A minimum in plots of ductile-brittle transition temperature versus particle size appears for ternary blends of each of the matrices with EOR-g-MA/EOR; blends based on SEBS-g-MA/SEBS, in most cases, show higher ductile-brittle transition temperatures, regardless of the matrix. However, blends with EPR-g-MA/EPR show comparable T_db with those based on EOR-g-MA/EOR for the amorphous polyamide but show the lowest ductile-brittle transition temperatures for nylon 6 within the range of particle sizes examined. For the blends with a bimodal size distribution, the global weight average rubber particle size is inappropriate for correlating the Izod impact strength and ductile-brittle transition temperature. In general, trends for this amorphous polyamide are rather similar to those of semi-crystalline nylon 6.