Production of biodiesel from waste fryer grease using mixed methanol/ethanol system

Transesterification of waste fryer grease (WFG) containing 5–6 wt.% free fatty acid (FFA) was carried out with methanol, ethanol, and mixtures of methanol/ethanol maintaining the oil to alcohol molar ratio of 1:6, and initially with KOH as a catalyst. Mixtures of methanol and ethanol were used for transesterification in order to use the better solvent property of ethanol and rapid equilibrium using methanol. Formation of soap by reaction of FFA present in WFG with KOH instigated difficulty in the separation of glycerol from biodiesel ester. To untangle this problem, two-stage (acid and alkali catalyzed) method was used for biodiesel synthesis. More than 90% ester was obtained when two-stage method was used compared to ∼ 50% ester in single stage alkaline catalyst. In the case of mixed alcohol, a relatively smaller amount of ethyl esters was formed along with methyl esters. Acid value, viscosity, and cetane number of all the esters prepared from WFG were within the range of the ASTM standard. Esters obtained from WFG showed good performance as a lubricity additive.     

IP网络资源调度与接纳控制技术研究

从IP QoS技术的研究现状出发,结合IETF的研究成果与电信网NGN的技术发展方向,阐述基于策略的端到端接纳控制框架的技术原理,在各大标准组织的技术框架内,给出一个具体的、切实可行的实现方法。     

Prediction of fire classification for wood based products. A multivariate statistical approach based on the cone calorimeter

Wood has long traditions as a building material, and is often used in construction elements, and as interior and exterior surfaces in the Nordic countries. In most applications, there are reaction to fire requirements to products used as surfaces, e.g. in escape routes and larger public spaces. Most wood products will therefore have to be treated with fire retardant (FR) agents to fulfil the strict requirements to properties connected to heat release and flame spread. Unfortunately, FR agents usually also increase the smoke production, as they cause a more incomplete combustion of the wood. The wood product manufacturers seek to find the optimal amount of FR additives where both heat release and smoke production in the classifying test are within the requirements given in the building regulations. This paper describes models for prediction of the European reaction to fire classes of wood products. The models are based on multivariate statistical analysis, and use test results from the cone calorimeter test as input. The presented models are, with very good precision, able to predict which Euroclass and additional smoke class a wood based product would obtain if it were to be tested in the single burning item test. Copyright © 2006 John Wiley & Sons, Ltd.     

Survival of rotavirus SA-11 on vegetables

Survival of rotavirus on lettuce, radishes, and carrots was studied to evaluate the potential of rotavirus transmission by vegetables irrigated with wastewater. The vegetables were contaminated with rotavirus SA-11 and stored at 4°C and room temperature in covered and uncovered containers to simulate post harvest conditions. Virus decay rates were greater on radishes and carrots than lettuce. Decay rates of rotavirus on lettuce, radish, and carrot ranged from ?0·057 to ?0·479 (log₁₀ pfu/day). Rotavirus SA-11 survived on lettuce, radish, and carrot for 25 to 30 days at 4°C but at room temperature survival was very different for the various vegetables varying from 5 to 25 days. Greatest survival was always observed on the lettuce. These data suggest that rotaviruses can survive long enough on contaminated vegetables as to be transmitted by this vehicle.     

Lithium/lithium vanadium oxide secondary batteries: IV. Evaluation of factors affecting the performance of test cells

With the aim of optimizing the performance of Li/Li_1+xV₃O₈ cells, several aspects of cathode preparation have been examined. The influence of synthesis technique, nature and amount of conductive additives, compacting pressure, cathode loading, and particle size, has been investigated. Furthermore, the role played by the solutions on cathode efficiency has been outlined. The formulations which perform best are based on small-sized particles blended with about 20% acetylene black and compacted at very high pressures to improve the contact between particles. Such cathodes can provide high capacities at high rates and good cycling efficiencies. The kinetic loss of capacity, observed during the first few cycles, may be alleviated by choosing solutions with high fluidity and conductivity.     

Inhibition of nitrification in the packed bed reactors by selected organic compounds

The effect of methanol, acetone, formalin and glucose on the nitrification process in the packed bed reactors has been investigated. For the utilized compounds the inhibition constant K_i was determined according to Dixon's method. The determined values were as follows: methanol K_i = 116.0 mg l^?1; acetone K_i = 804.2 mg l^?1; formalin K_i = 61.5 mg l^?1. The value of K_i for glucose has not been determined because glucose in applied concentration up to 11,325 mg l^?1 had no effect on the nitrification course.     

Polymorphisme du dioxotriplomb (II) tetraoxosulfate (VI) Pb3O2(SO4) a basse temperature. II - Etude structurale de la phase ferroelastique gamma-Pb3O2 (SO4) par diffraction neutronique sur poudres a 2 et 45K

Full-profile neutron powder diffraction structure refinements of dioxotrilead(II)tetraoxosulfate(VI) at 2 and 45K reveal that both the alpha- and the gamma-Pb₃O₂ (SO₄) polymorphs have to be refined simultaneously at these temperatures. Accordingly, the paraelastic alpha phase is trapped in the ferroelastic gamma phase, yielding thus mixtures of both compounds in a nearly 1:1 molar ratio. Both structures are essentially similar. The slight variations of the lead-oxygen distances in the infinite edge-sharing tetrahedral (Pb₃ O₂)n double-chains force the sulfate group to adopt nearly C3v and C2v site symmetries respectively in the alpha and gamma phases. The present work is a good example of the behaviour of the DBW3.2 program (1) when mixtures of very similar structures are refined simultaneously (high correlation between some structural parameters).     

Upgrading coal-derived liquids to diesel fuel

Distilled fractions of a coal-derived liquid from the H-Coal process were upgraded to diesel fuel by catalytic hydrotreatment. The total hydrotreated products were distilled into naphtha (<180°C) and diesel fuel fractions (>180°C) and the diesel fractions were analysed for hydrocarbon-type composition, hydrogen content and some diesel fuel properties. GC—MS-analyses were carried out on the hydrocarbon-type fractions to identify individual chemical compounds. To investigate the effect of different distillation cut points on diesel fuel yield and properties, cut points for one hydrotreated product were varied. The diesel fuel cetane numbers were correlated with percentage hydrogen, total aromatics and saturates. Cetane numbers above 40 were obtained for diesel fuels containing (i) more than 75% saturates, (ii) less than 15% total aromatics and (iii) a hydrogen content above 12.8%. Compounds identified by GC—MS-analyses (in the diesel fractions) were typical aromatic and cycloparaffin compounds. Normal-and iso-paraffin compounds were not detected. By varying the distillation cut point from 135 to 180°C, the cetane number of the residual diesel fraction improved from 37 to 44. This increase is ascribed to the removal of aromatic compounds in the 135–180°C boiling point range.     

An experimental and numerical study of hunting in thermostatic-expansion-valve-controlled evaporators

The dynamic behaviour of a thermostatic-expansion–valve (TEV)-controlled dry-evaporator is studied experimentally and numerically. Although the linear model of the TEV together with the distributed model of the evaporator is able to predict the stable dynamic response of the system adequately, it fails to reproduce the hunting behaviour that is observed under certain operating conditions. A scrutiny of the experimental data reveals the possible existence of hysteresis in the system. The distributed model including the experimentally determined input-output characteristics of the TEV is able to reproduce the main features of the hunting oscillations well. The amplitude and frequency of these oscillations depend on the static superheat setting, the heat load of the evaporator and the time constant of the TEV bulb.     

Continuous formation of slurry ice by cooling water–oil emulsion in a tube

Water-silicone oil emulsion with an additive, (C₂H₅O)₃SiC₃H₆NH₂, was examined as a heat storage material. A spiral tube used as a heat exchanger was immersed in a low temperature bath and the emulsion was circulated in the tube to make ice continuously. Ice was separated from the ice–liquid suspension in an outlet tank. The amount of formed ice, the temperatures of the inlet and the outlet of the heat exchanger, and the temperatures in the tube wall were measured and the overall heat transfer coefficient and the heat flux through the tube were calculated. Experiments were carried out, varying the flow rate, the temperature of cooling brine, and the thickness of tube wall. The condition under which slurry ice was formed continuously without adhesion of ice to the cooling wall was clarified. Though decrease in the thermal resistance of the tube increased the rate of ice formation or raised the brine temperature, it narrowed the range of the flow rate and of the brine temperature in which slurry ice was formed continuously.