氧化锌压敏陶瓷烧结致密化过程的研究

本文研究了氧化锌压敏陶瓷的致密化过程，结果发现只有当烧结温度升高到一定值时，试样中的ＺｎＯ粉粒产生聚集，致密化过程才开始．致密化是瓷体获得稳定电性能的基础．低熔点添加剂Ｂ２Ｏ３可以降低致密化的起始温度，而致密化过程中的等温烧结对ＺｎＯ压敏陶瓷的最大密度几乎没有影响．     

定量电子晶体学硼对Ni3Al的电荷密度分布的影响

阐述了定量电子晶体学测定晶体电荷密度分布的基本原理和方法，不足之处和改善途径。以硼对Ｎｉ３Ａｌ的电荷密度分布的影响为实例，介绍了定量电子晶体学在研究晶体电子结构方面的应用前景。     

二钼酸铵(ADM)非团聚晶体的生成试验

探讨了二钼酸铵非团聚晶体生成的机理及制取新工艺。采取该工艺制取的ADM费氏粒度（Fsss)约30μm，激光粒度分布d0.5为370μm，松装比达1.37/cm^3。     

浅谈多层建筑的斜屋面结构设计

多层建筑的斜屋面结构，应建立合理的结构模型，选用合理的结构方案，在采用结构软件设计时，一定要正确采用倾斜构件沿水平或垂直方向的荷载。     

New method for measuring an optical property of a sample treated by FWA

In this article, a new method for measuring a total spectral radiance factor of a FWA‐treated sample illuminated by a specific standard illuminant is introduced. The method replaces an unstable real fluorescent standard by a bi‐spectral luminescent radiance factor data, which works as a virtual fluorescent standard (VFS) by knowing spectral intensity distributions of illuminations applied to the sample. The method utilizes two illuminations I₁ and I₂ whose relative spectral intensity distributions are different from each other and synthesizes a virtual illumination presenting the identical fluorescent spectral radiance factor to that presented by the standard illuminant with the VFS of the specific bi‐spectral luminescent radiance factor by linearly combining I₁ and I₂ with the suitable weighting factors. The applicability of the method is examined in principle by comparing ISO brightness and CIE whiteness index of fluorescent standard paper as a test sample obtained by this new method to the assigned values. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 195–200, 2007     

鄂尔多斯西缘前陆盆地巨厚黄土地区地震采集技术

鄂尔多斯西缘前陆盆地表层地质地貌极其复杂，有巨厚黄土区、黄土-沙漠区及山前砾石-黄土区，独特的黄土地貌使得地震采集面临着诸多技术难题。根据以往巨厚黄土地区地震采集经验，采用多种方法系统地开展黄土表层结构精细调查，深入研究黄土地球物理特征及激发因素与表层黄土结构之间的关系，优选激发井位和井深，确保了激发效果；采用小道距、三线小线距、高密度空间采样技术，获得了高信噪比、高分辨率地震资料。研究表明，巨厚黄土地区地震采集时应优选激发井位和岩性，合理选择激发井深；坚持多深井组合激发、单井药量不宜过大总药量要大两项基本原则；采用高密度采样技术，提高采集资料的覆盖次数和信噪比。图10表1参15     

超低密度早强水泥浆在天然气井固井中的应用

在天然气井固井中,上部固井质量一直存在问题。为了提高固井质量,达到保护套管的目的,研制了新型水泥浆体系。经室内研究,选择了减轻剂的种类与粒级配比;根据低密度水泥浆的性能要求,确定了配方,并对该配方进行了触变防漏特性及稳定性分析,形成了具有体系稳定、水泥浆密度波动对水泥浆体系产生影响较小、抗漏失能力强、早期强度发展快等特点的超低密度水泥浆体系。经现场试验,获得了较好的效果。     

土坝及土堤干密度检测控制技术

使用进口或国产核子密度仪测定土坝及土堤压实干密度具有操作简便、快速之优点。通过对不同的土质进行了现场核子密度仪与环刀法测定干密度的对比试验后 ,证明核子密度仪在测定土的干密度时 ,用环刀法测定并进行校核是必要和重要的     

Development of High Thermal Conductivity Aluminum Nitride Ceramic

AIN ceramics with densities varying from 3.18 to 3.30 g/cm³ and room-temperature thermal conductivities varying from 88 to 193 W/m K were produced. Different sintering conditions, packing powders, AIN powder sources, carbon additive, and sintering times were evaluated, and the key processing parameters which cause the differences in density and thermal conductivity were identified. SEM, TEM, and EDS were used to characterize the correlation between thermal conductivity, microstructure, and processing parameters. The important parameters which control the thermal conductivity of AIN ceramics are discussed.     

Properties of ligno‐cellulose fiber Hildegardia

Studies on some properties such as the density, the degradation temperatures, the morphology and the spectral features of the ligno‐cellulose fiber Hildegardia were carried out in both untreated and alkali treated form. The fibers are found to have good morphology and moderate initial and final degradation temperatures. On alkali treatment, the lignin was found to be eliminated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2216–2221, 2002