不规则I型和L型横截面形状薄壁杆件的横向弯曲稳定分析

根据势能驻值原理,采用转换B3样条函数模拟杆件横截面的翘曲位移场,文[8]提出了用于分析在横向荷载作用下薄壁杆件稳定问题的样条有限杆元法。方法适用于任意横截面形状和任意边界条件的薄壁杆件,考虑了杆壁中面上剪切变形的影响,能很好地描述剪力滞后现象。本文讨论了不规则I型截面简支梁和L型截面简支梁的屈曲分析,数值算例的结果表明了方法的灵活性、精确性和有效性。     

TiB2与BN复相陶瓷的渗流模型

试验结果证实,TiB₂与BN复相陶瓷的导电性能符合渗流理论,原料粉粒度配比下,其渗流阀值为V_c%=22.9%;原料粉粒度比的改变将改变渗流阀值,从而改变各配比下的电阻率值;TiB₂与BN在SPS系统中快速烧结,晶粒的尺度比与原料粉的粒度比基本保持一致。     

Dissolution of Ti wires in sulphuric acid and hydrochloric acid solutions

Ti wire electrodes were immersed in acidic solutions containing H₂SO₄ and HCl of various concentrations at 353 K to evaluate corrosion rate by measurement of electric resistance change (resistometry). Addition of hydrochloric acid to sulphuric acid solution promoted depassivation of Ti. After depassivation, the immersion potential dropped to the hydrogen evolution potential and a hydride layer was formed on the surface. The hydride layer dissolved continuously in the acidic solution. SEM observation showed that Ti wires dissolved almost uniformly in the early stage and that the dissolution then trace became irregular due to nonuniform growth of the hydride layer. Dissolution rate of a Ti wire was estimated almost accurately by resistometry.     

Aflatoxin B1 contamination of shrimp feeds and its effect on growth and hepatopancreas of pre-adult Penaeus monodon

A survey of aflatoxin B₁ (AFLB₁) levels in commonly used commercial shrimp finisher feeds in the Philippines showed a various range of values from not detected to 120 μg kg^?1 using high-performance thin-layer chromatography. Six experimental diets were prepared to contain various levels of AFLB₁ based on survey results to determine the effects of such contamination in pre-adult shrimp Penaeus monodon (17.5 ± 0.6 g). Results showed that shrimps fed diets containing AFLB₁ greater than or equal to 73.8 μg kg^?1 gave comparatively poor growth rate and higher susceptibility to shell diseases. No AFLB₁ residues were detected in sampled whole shrimp tissues after 62 days of exposure to AFLB₁ containing diets indicating a low potential for transmission of the toxin from edible shrimp tissues to consumers. Histopathological alterations in the hepatopancreas of shrimp chronically exposed to AFLB, were observed in all samples. The degree of alterations correlated with the level of AFLB₁. Based on growth performance, pre-adult shrimps can tolerate AFLB₁ levels of up to 52.3 μg kg^?1 in the feeds although histopathological changes were already evident in the tissues of shrimps given diets with 26.5 μg kg^?1 AFLB₁.     

B. F. Skinner: Au-delá de la controverse.

Discusses controversies surrounding the work of B. F. Skinner's influence on various theories of human and animal behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

一种新型均速管流量计在高炉煤气测量中的应用

高炉煤气具有管径大、流速低、粉尘大、易堵塞等特点，其流量用常规装置测量效果不尽理想。近来，一种新型均速管流量计——威力巴流量计采用独特的结构设计，在高炉煤气流量测量中取得了不少进展。本文对威力巴流量计的基本原理和应用于高炉煤气测量的突出优点进行了分析，并给出了安装使用时的一些建议。     

基于B/S模式的汽车零件销存管理信息系统的设计与实现

对于采用连锁经营的汽车零件销售企业来说,各经营网点分布在同一城市的不同区域或不同城市,为了在充分利用原有信息和资源的基础上处理好许多中间环节,减少人员工作量,保证企业销存状态良好,提高管理效率,设计了基于B/S模式的汽车零件销存管理信息系统的技术方案,详细讨论系统的功能设计以及实现技术。     

基于B点磁探针膛内电枢电弧长度与速度分布测量的计算机控制系统的研究

基于B点磁探针的测量原理，建立了电磁轨道炮膛内三维等离子体电枢电弧长度和电弧运动速度测量的数学模型，通过对该模型的分析给出了用于测量膛内电枢电弧长度和运动速度分布的相应推论。开发了用于测量膛内等离子体电枢电弧长度和速度的多通道计算机控制诊断系统，并进行了相应的试验研究。     

Kinetic investigation of the carbothermal reduction of an Iranian clay

The kinetics of the carbothermal reduction of clay under argon atmosphere has been investigated by the X-ray diffraction method. The clay-carbon (excess) mixture was formed into 2 cm diameter disks of different thicknesses. Experimental data evidences the significant effect of sample thickness on the reaction rate at 1400 °C. Decreasing thickness promotes mullite dissociation and formation of SiC and alumina powders. Mathematical modeling of the reaction system showed the gas diffusion in the Knudsen regime through the pellet to be the rate controlling step. Diffusivity of CO and reacted core tortuosity factor have been calculated.     

X-ray structure analysis and elastic properties of a fabric reinforced carbon/carbon composite

The effect of heat treatment on microstructure of a plain-weave carbon fabric reinforced carbon-carbon composite with phenolformaldehyde-derived carbon matrix was investigated by X-ray diffraction. The diffraction patterns were analysed by the least-square fitting program Carbonxs. After heat treatment from 1000 to 2800 °C the interplanar distance of (002) planes decreased from 3.488 to 3.420 Å and the lattice parameter in basal plane increased from 2.440 to 2.464 Å, respectively. Simultaneously, the coherent block size in the basal plane directions increased from 18 to 54 Å, which was accompanied by an increase of the fraction of organised carbon atoms from 0.50 to 0.85. The 002 diffraction profile of the composite was much narrower than the sum of peaks of the matrix and fabric alone. This can probably be caused by a better crystallographic ordering (or by a partial graphitisation) of the matrix in the composite. On the other hand, the composite Young’s modulus slightly decreased with the treatment temperature increasing from 2200 to 2800 °C in spite of the established strong improvement of fibre crystallinity and, therefore, fibre modulus. The mechanisms diminishing the modulus of composite (e.g. partial matrix graphitisation at the fibre/matrix interface and decreasing fibre/matrix contact area) probably prevailed over the increasing contribution of the fibre modulus.