I/OIMAGESYSTEM微波中继应用

微波中继的应用非常广泛 ,目前在二维、三维施工中跨越障碍物时 ,一般都使用微波中继站来传输命令和数据。文章就微波中继及I/OIMAGESYSTEM“蛇形排列”先进功能的实际应用进行了详细的阐述 ,同时提出了使用微波中继站应注意的问题。     

CAS-BUS: A Test Access Mechanism and a Toolbox Environment for Core-Based System Chip Testing

As System on a Chip (SoC) testing faces new challenges, some new test architectures must be developed. This paper describes a Test Access Mechanism (TAM) named CAS-BUS that solves some of the new problems the test industry has to deal with. This TAM is scalable, flexible and dynamically reconfigurable. The CAS-BUS architecture is compatible with the IEEE P1500 standard proposal in its current state of development, and is controlled by Boundary Scan features.This basic CAS-BUS architecture has been extended with two independent variants. The first extension has been designed in order to manage SoC made up with both wrapped cores and non wrapped cores with Boundray Scan features. The second deals with a test pin expansion method in order to solve the I/O bandwidth problem. The proposed solution is based on a new compression/decompression mechanism which provides significant results in case of non correlated test patterns processing. This solution avoids TAM performance degradation.These test architectures are based on the CAS-BUS TAM and allow trade-offs to optimize both test time and area overhead. A tool-box environment is provided, in order to automatically generate the needed component to build the chosen SoC test architecture.     

Preparation and Application of Active Composite Antibacterial Material Containing Ag~ and Zn~(2 )

1Introduction Harmfulbacteriaexistanywhereintheworldsuchas soil,air,water,surfacesofobjectsandourskins,etc.Thenumberofbacteriumisenormous,withmanydiffer entspecies.Theyhavethreatenedthehealthofhuman beingsseriously.Withthedevelopmentofeconomyand environme…     

Study on Luminescence Properties of High-Density Phosphors BiTaO4∶Pr3+ and BiTaO4

The photoluminescence properties of BiTaO4∶Pr3+ and BiTaO4 at room temperature were studied, and the infrared transmission and diffusion reflection spectra of BiTaO4 were measured. The photoluminescence spectrum of BiTaO4 peaks at about 420, 440 and 465 nm. There has an obvious excitation band from 330 to 370 nm. The photoluminescence spectrum of BiTaO4∶Pr3+ consists of the characteristic emission of Pr3+, and its main peak is at 606 nm from 3P0→3H6 transition of Pr3+. Its excitation spectrum consists of the wide band with maximum at 325 nm, the wide band in the range of 375～430 nm, and the characteristic excitation of Pr3+. The bands at 325 nm and 375～430 nm may be from the absorption of the charge transfer transition of the tantalate group and defect energy levels in its forbidden band, respectively. There is energy transfer from host to Pr3+. Because both the host density and photoluminescence peak intensity of BiTaO4∶Pr3+ are superior to PbWO4, BiTaO4∶Pr3+ may be a potential heavy scintillator.     

A comparison of three approaches for predicting C4 species cover of northern mixed grass prairie

The C4 composition of Canadian mixed-grass communities is more sensitive to environmental change than other grasslands. Reliable methods of detecting such changes are necessary if these landscapes are to be properly managed. One approach is to use satellite remote sensing systems. Various studies have shown that the asynchronous seasonality of C3 and C4 species allows the relative abundance of each photosynthetic type to be estimated using temporal trajectory indices (TTIs) of sensor-derived normalized difference vegetation index (NDVI). In this study, we compared three approaches for predicting C4 species cover at Grasslands National Park (GNP) (Saskatchewan, Canada). TTIs related to Approach I were calculated from plots of NDVI vs. day-of-year (DOY). TTIs related to Approach II were calculated from plots of normalized cumulative NDVI vs. growing degree day (GDD). TTIs related to Approach III were calculated as ratios of early-season NDVI to late-season NDVI. Our analyses were conducted at two separate ecological scales. A within-community analysis used field-sampled data from upland grassland to compare techniques at sampling resolutions of 0.5, 2.5, 10, and 50 m. An across-community analysis compared techniques using a vegetation survey of the GNP region and TTIs calculated from Advanced Very High Resolution Radiometer (AVHRR) data (1 km). At both scales, TTIs related to the timing of specific phenological events were the best predictors of C4 species cover. While all techniques performed well in the within-community study, Approach III performed best. Here, the predictive ability of each approach was weak at a resolution of 0.5 m but stronger at 2.5, 10, and 50 m resolutions. We also found that the optimal sampling dates for Approach III fell within a certain GDD range. This is encouraging for the a priori selection of sample dates, which would make the need for full seasonal time series redundant. In the across-community analysis, the AVHRR-derived Approach II TTIs were better able to discriminate among grasslands of different C4 composition than any other technique (overall accuracy=74%). However, for some C4 cover classes, the predictive accuracy of this approach was low. While these results are encouraging for the use of spectral data in monitoring the C4 cover of northern prairie, various research issues remain. At the within-community level, these include (a) further attempts to define objective criteria for the a priori identification of sampling dates for Approach III, and (b) and the extension of such studies to other growing seasons and community types/grassland regions. At the across-community level, these include the expansion of such techniques to a larger geographical region that contains a wider range in C4 cover values and land use types (e.g. ungrazed vs. grazed grasslands).     

用环境友好催化剂合成丙酸异丁酯的研究

报道了以固载杂多酸盐TiSiW12O40/TiO2为环境友好催化剂，对以丙酸和异丁醇为原料合成丙酸异丁酯的反应条件进行了研究。实验表明：TiSiW12O40/TiO2是合成丙酸异丁酯的良好催化剂，最佳反应条件为：n（醇）：n(酸）=1.2:1，催化剂用量为反应物料总质量的2.0%。反应时间1.0h，反应温度106-125℃，上述条件下，丙酸异丁酯的收率可达79.1%。     

基于PNX1300系列多媒体处理器的MPEG-4视频压缩卡设计

介绍了一种基于MPEG—4视频压缩标准和PNX1300系列多媒体处理器的MPEG—4视频压缩卡的设计方案，给出了该视频压缩卡的硬件结构框图，详细分析了其软件编码器的设计流程。     

IPv6过渡机制讨论

本文在简要地介绍Ngtrans工作组提出的大多数过渡机制的基础上，尝试对它们进行区分、分类，并对每一种过渡机制的优缺点进行分析。另外．还对这些机制的布置以及一部分支持这些机制的产品平台进行讨论。     

In situ formation of multi scale reinforcing phases to improve performance of Al2O3-SiC C castables

In order to improve the physical properties and slag corrosion resistance of refractory materials for hot metal pretreatment, different contents of composite metal powders (CMP) were introduced into Al2O3-SiC-C refractory castables. The effect of CMP on the microstructure, physical properties and slag corrosion resistance of Al2O3-SiC-C refractory castables were studied. The results show that the multi scale reinforcing phases including flake crystals, rod shaped fibers, filamentous fibers and whiskers are in situ formed in the samples with addition of CMP, which result to the improvement of the cold modulus of rupture and cold crushing strength. When the addition of CMP is 6 wt.%, the high temperature modulus of rupture increases by 231%, the thermal shock resistance increases by 77% after thermal shock by water cooling 5 times and the percentage of the slag resistant area reduces by 37.2%.     

Potential tissue implants from the networks based on 1,5-dioxepan-2-one and ε-caprolactone

The synthesis and characterization of degradable polymeric networks for biomedical applications was performed. Cross-linked films of poly(ε-caprolactone) (PCL) and poly(1,5-dioxepan-2-one) (PDXO) having various mole fractions of monomers and different cross-link densities were successfully prepared using 2,2′-bis-(ε-caprolactone-4-yl) propane (BCP) as cross-linking agent. Reaction parameters were carefully examined to optimise the film-forming conditions. Networks obtained were elastomeric materials, easy to cast and remove from the mould. Effect of CL content and cross-link density on the final properties of the polymer network was evaluated. High CL content or degree of cross-linking led to increase in Young's modulus and decrease in elongation at break. An increase in crystalline domains in films having a higher CL content was observed by optical microscopy. A greater thermal stability was observed in films having a high CL content. The hydrophilicity of the materials could be tailored by changing the CL content. The surface of the films became rougher with higher CL content.