紫金山金矿提金工艺研究与探讨

介绍了紫金山金矿采用堆浸、全泥氰化提金试验的原则流程和结果，对堆浸－全泥氰化联合提金试验和原则流程合理性进行了初步分析和探讨，并对该矿提金工艺提出了看法，可供现有提金选矿厂改造和新建提金破厂设计参考。     

氧化锌矿制备活性氧化锌的新工艺

用氧化锌矿作原料经酸浸、净化和焙烧可制得纯度为98.3％的活性氧化锌,工艺简单。研究了酸浸温度、pH值对锌浸出率的影响,考察了净化工艺中的除杂问题,并用DTA分析了活性氧化锌制备过程中焙烧工艺的影响。     

矿仓口轻型惯性振动放矿机设计的若干问题

结合实际介绍了矿仓口轻型惯性振动放矿机设计过程中应注意的问题，对放矿机安装方式的确定、给矿量的匹配、结构设计中的具体问题提出了解决办法。     

Deep ocean bubble transport model coupled with multiple hydrate behavior characteristics

Submarine gas seepage is a widely observed process. In this study, a unified mechanistic model of bubble transport both inside and outside the gas hydrate stability zone (GHSZ) was developed. Multiple hydrate-related behaviors were considered, including hydrate nucleation, hydrate film lateral spread, hydrate shell dynamic growth, hydrate dissolution and decomposition, and collapse and fracture deformation of hydrate-coated bubbles. Using the proposed model, a series of simulation studies about bubble dissolution and rising fate were conducted. The results indicate that the formation of solid hydrates in the deep-sea environment can provide a fairly effective barrier for the dissolution and shrinkage of bubbles, and the deeper the initial release water depth, the smaller the critical size of the bubble required for arriving at the water surface. Furthermore, the majority of gases released from the seafloor would be absorbed by the shallow oceanic layer, but larger bubbles could still pass through the water column to the atmosphere.     

Consolidated theory of fluid thermodiffusion

We present the Onsager–Stefan–Maxwell thermodiffusion equations, which account for the Soret and Dufour effects in multicomponent fluids. Unlike transport laws derived from kinetic theory, this framework preserves the structure of the isothermal Stefan–Maxwell equations, separating the thermodynamic forces that drive diffusion from the force that drives heat flow. The Onsager–Stefan–Maxwell transport-coefficient matrix is symmetric, and the second law of thermodynamics imbues it with simple spectral characteristics. This new approach allows for heat to be considered as a pseudo-species and proves equivalent to both the intuitive extension of Fick's law and the generalized Stefan–Maxwell equations popularized by Bird, Stewart, and Lightfoot. A general inversion process facilitates the unique formulation of flux-explicit transport equations relative to any choice of convective reference velocity. Stefan–Maxwell diffusivities and thermal diffusion factors are tabulated for gaseous mixtures containing helium, argon, neon, krypton, and xenon. The framework is deployed to perform numerical simulations of steady three-dimensional thermodiffusion in a ternary gas.     

Germanium-antimony-selenium-tellurium thin films: Clusters formation by laser ablation and comparison with clusters from mixtures of elements

Quaternary germanium-antimony-selenium-tellurium (Ge-Sb-Se-Te) thin films deposited from Ge_19.4Sb_16.7Se_63.9−xTe_x (x = 5, 10, 15, and 20) glass-ceramics targets by radio frequency magnetron sputtering were studied using laser ablation quadrupole ion trap time of flight mass spectrometry. Binary, ternary, and quaternary Ge_aSb_bSe_cTe_d clusters were formed and their stoichiometry was determined. By comparison of the clusters obtained from quaternary Ge-Sb-Se-Te thin films and those from ternary Ge-Sb-Te materials, we found that Ge-Te species are not detected from the quaternary system. Furthermore, Ge-Se and Se-Te species are missing in mass spectra generated from Ge-Sb-Se-Te thin films. From the Ge-Sb-Se-Te thin films, 16 clusters were detected while ternary Ge-Sb-Se glasses yielded 26 species. This might be considered as a signal of higher stability of Ge-Sb-Se-Te thin films which is increasing with a higher content of Te. The missing (Se₂⁺, Ge_aSb⁺ (a = 1–4), and GeSe_c⁺ (c = 1, 2)) and new (Ge⁺ and Sb_bTe⁺ (b = 1–3)) clusters may indicate that some of the structural features of the films (Ge₂Se_6/2 and Se₂Sb-SbSe₂) were replaced by (GeSe_4−xTe_x and SbSe_3−xTe_x) ones. In addition, when comparing the stoichiometry of clusters formed from Ge-Sb-Se-Te thin films with those from the mixtures of the elements, only Sb₃⁺ and SbSe⁺ were observed in both cases. The knowledge gained concerning clusters stoichiometry contributes to the elucidation of the processes proceeding during plasma formation used for the chalcogenide thin films deposition.     

摇床T25细胞培养瓶流体力学与传质特性研究

细胞培养技术是生物医药产业的支柱,以实现微小体积内的高密度、高通量细胞培养为目的,系统地研究了常用于单层静态培养的T25方瓶置于翘板摇床上在不同操作条件下的流体力学特性和传质性能。结果表明,振荡可以显著提高方瓶的传质速率并降低混合时间,使高密度培养成为可能,但瓶盖上的空气滤膜在高转速时成为传质速率的限制因素;培养瓶对称轴与摇床旋转轴平行时,其相对位置对混合和传质无明显影响,但当二者成45°角时,相同转速下混合时间显著缩短;使用自定义函数实现了基于动态网格的CFD模拟,对不同转速下方瓶内剪切应力和能量耗散在时间与空间上分布进行了分析,为基于T25培养瓶开发一次性高通量微型反应器提供了数据支持和理论基础。     

煤地下气化低效的化学反应工程根源：滞留层及通道中的传质与反应

煤地下气化技术历经国内外一百多年的实验室研究和大量现场试验仍然存在产率低等关键问题。虽然一些文献认为该技术是未来煤炭利用技术的发展方向,但其至今仍未实现工业应用的现象说明其本身存在尚未被充分关注的关键科学（卡脖子）问题。本文从化学反应工程基本原理出发分析该技术涉及的关键传质与反应过程,并与现代大型地上煤气化技术对比,探讨其工业应用技术挑战的科学根源。     

电渗析苦咸水淡化技术研究进展

电渗析苦咸水淡化技术具有脱盐效果好、成本较低、绿色环保等优点,但存在制膜工艺繁琐、传质模型不够精确、能效有待提升等问题。本文首先分析了苦咸水电渗析用离子交换膜的制备及改性方法,对膜材料存在的问题进行了探讨。综述对比了苦咸水电渗析在简化模型、理论模型、半经验模型方面的原理及最新进展,系统总结了常规苦咸水电渗析过程的运行方式和工艺优化策略,并进一步介绍了以新型电去离子、冲击电渗析、可再生能源驱动电渗析为代表的新型电渗析过程在苦咸水淡化方面的原理及应用。在此基础上,提出了今后的研究方向集中于降低制膜成本、优化传质模型、探究集成膜法淡化工艺以及新型电渗析过程等方面。     

超重力强化AMP-PZ复合溶液脱碳技术及表观动力学

为提高工业上火电厂乙醇胺（MEA）吸收塔脱碳工艺中脱碳率和反应速率,提出了超重力技术耦合2-氨基-2-甲基-1-丙醇-对二氮己环（AMP-PZ）混合胺脱碳方法。正交实验表明：不同操作参数对脱碳率的影响显著性大小依次为：超重力因子、气液比、吸收剂质量浓度、主吸收剂含量、温度;最佳操作条件为：超重力因子为60,气液比为15,吸收剂质量分数为25%,主吸收剂质量分数为60%,温度为25℃,CO₂脱除率可达97.16%。相对传统的乙醇胺（MEA）吸收塔法,CO₂脱除率提高了7.16%。相同操作条件下,旋转填料床的脱碳反应速率常数比曝气反应装置高一倍。建立了超重力场中AMP-PZ脱碳表观动力学模型,不同操作参数对反应速率常数的显著性影响大小依次为：超重力因子>气液比>吸收剂质量浓度。