纳米Fe2O3的制备与气敏性质的研究

报道了纳米氧化铁的制备工艺，采用沉淀法、溶胶凝胶法制备了纳米α-Fe2O3、γ-Fe2O3粉体，用热重－差热分析（TG－DTA）、X射线衍射（XRD）、透射电镜（TEM）和二次粒度分布对粒子进行表征，并制作了气体敏感元件。讨论了纳米氧化铁的制备工艺对气敏性质的影响。     

Site-directed mutagenesis of a calcium binding site modifies specifically the different biochemical properties of annexin I

All the functions of annexins in vitro as well as in vivo aremediated and probably regulated by calcium. We have used recombinantannexin I, synthesized by Escherichia coli, and we have performedsite-directed mutagenesis. We have mutated the endonexin foldof domain 2 that binds calcium. Mutations were performed inthis domain of the molecule because it perfectly matches thecalcium binding consensus sequence. The two glycines of thisfold were mutated into glutamic acid. The helix content andthe stability of the mutants are identical to those of the wild-type,suggesting that the mutations did not drastically affect thestructure of the protein. The two mutants showed modified calciumbinding affinities. However, the calcium binding affinity ofthe G131E mutant was far more altered than that of the G129Emutant. Furthermore, other biochemical properties of these mutantswere modified to different extents. The binding to phospholipidwas not seriously affected, whereas the selfassociation waslost by the G131E mutant. In the same way, liposome aggregationis conserved, but modified, while the calcium affinity measuredby equilibrium dialysis is dramatically altered.     

掺纳米Al2O3的纳米ZrO2(4Y)固体电解质的电性能

以纳米ZrO2(4Y)粉和纳米Al2O3粉为原料, 单轴成型, 1 200, 1 300 ℃无压烧结. 对掺不同质量分数(0.0～5.0%)Al2O3的ZrO2(4Y)烧结体, 用XRD, SEM和TEM研究了相组成和微观结构. 在不同温度下(300～1 000 ℃)测试了交流阻抗谱, 发现掺很少量的纳米Al2O3可降低ZrO2(4Y)的晶粒电阻. 但随着Al2O3掺入量的增加, 晶界电阻增大, 晶粒电阻也有所回升. 晶粒和晶界电导活化能则随Al2O3掺入量的变化不大. 对1 200 ℃,2 h烧结样品, 在1 000 ℃时, 掺0.5% Al2O3的ZrO2(4Y)样品有最大电导率, 为3.8×10-2Ω-1·cm-1.     

锰掺杂对PNW-PMS-PZT压电陶瓷结构和性能的影响

采用传统陶瓷工艺制备了Pb(Ni1/2W1/2)O3-Pb(Mn1/3Sb2/3)O3-Pb(Ti，Zr)O3-xMnO2压电陶瓷，分析了经1150℃烧结2h制备的陶瓷样品的相结构组成。实验结果表明：所有陶瓷样品均为钙钛矿相，未发现其它晶相。随着锰掺杂量的增加，陶瓷晶粒逐渐长大。研究了不同剂量的锰掺杂对压电陶瓷介电和压电性能的影响。结果表明：随着锰掺杂量的增加，材料逐渐变“硬”，当MnO2掺杂量少于0．2％(按质量计，下同)时，相对介电常数εr、压电常数d33和机械品质因数Qm逐渐增加，介电损耗tanδ减小；当MnO2掺杂量多于0．2％时，εr、d33和Qm逐渐降低，tanδ增加。随着锰掺杂量的增加，机电耦合系数kp和Curie温度θc逐渐减小。MnO2掺杂量为0．2％的压电陶瓷适合制作大功率压电陶瓷变压器。其压电性能为：εr=2138，tanδ=0．0058，kp=0．613，Qm=1275，d33=380pC／N和θc=205℃。     

Improvement of structural stability and electrochemical activity of a cathode material LiNi0.7Co0.3O2 by chlorine doping

In the process of Li⁺ intercalation-deintercalation, electron removal is accompanied simultaneously. Oxygen was found to compensate electron removal both in theoretical calculations and practical experiments. Chlorine addition to LiNi_0.7Co_0.3O₂ was expected to exchange electrons in that Cl⁻ was easier to lose electrons than O²⁻. LiNi_0.7Co_0.3O_2−xCl_x was identified as a pure hexagonal lattice of α-NaFeO₂ type by X-ray diffraction. X-ray photoelectron spectroscopy was used to analyze the influence of chlorine substitution on the oxidation state of transition-metal ions. Charge-discharge experiments and cyclic voltammetry confirmed that chlorine addition was an effective way to improve reversible capacity and structural stability in cycles.     

New catalyst systems for the polymerization of acetylene

The catalytic activities of WCI₆Ph₄Sn, MoCl₅Ph₄Sn and tetrabenzyltitanium were examined in the polymerization of acetylene. The structure, morphology and electrical conductivity of the doped and non doped polyacetylene were also studied.     

掺杂型尖晶石Li_(1.05)Mg_xMn_(2-x)O_4的合成及性能研究

采用高温固相法制备了尖晶石正极材料L iMxMn2-xO4(X=0.04,0.06,0.08,0.10),并用XRD、SEM、ICP-AES、充放电测试等手段研究了其组成、结构、表观形貌和电化学性能。结果表明:该法制备的尖晶石正极材料L iMxMn2-xO4为单一尖晶石结构,粒径分布均匀,其比容量和循环性能较未掺杂尖晶石L iMn2O4有显著的提高。     

Structure, thermal-stability and reducibility of Si-doped Ce–Zr–O solid solution

The Si-doped Ce–Zr–O solid solutions have been prepared by the reverse microemulsion method. The effects of Si and its content on the structure characters, thermal-stability and reducibility of the Ce–Zr–O solid solution have been studied by N₂ adsorption, XRD, laser Raman (LR), TPR, FT-IR, NMR and XPS methods. The results indicate that, there are the bonds of Si–O–M (Ce or Zr) in the Ce–Zr–Si–O solid solutions, and the presence of Si can increase obviously the surface area, thermal-stability, crystal lattice distortion rate, and reducibility of the solid solution. The surface area of the sample with 20 wt.% Si reaches 153 m² g⁻¹ after being calcined at 900 °C for 6 h. The Ce–Zr–O solid solution with 5.2–10 wt.% Si shows excellent thermal-stability and reducibility.     

金属离子掺杂二氧化钛及水体光催化脱氮研究

采用溶胶-凝胶法制备了掺杂Ce^3＋、La^3＋、Ag^＋、Fe^3＋的TiO2光催化剂，以考察其薄膜和粉体形式对水中无机氮的光催化去除效果和活性．用所制备的催化剂对含氨氮-亚硝酸氮的混合液进行了光催化脱氮研究．本文利用UV—Vis吸收光谱、XRD和TEM对催化剂进行了表征．同时，对影响TiO2光催化效率的因素：如掺杂金属离子的种类、浓度、涂膜层数、反应液中有无Fe^2＋、不锈钢和玻璃载体、反应器的构型等进行了探讨，并对今后的研究进行展望．经过2h紫外光照射反应，实验最佳脱氮效果：金属离子掺杂TiO2薄膜型催化剂总氮去除率在30％左右，金属离子掺杂粉末型催化剂光催化最高总氮去除率可达41．7％．     

非金属掺杂的第二代二氧化钛光催化剂研究进展

寻求廉价、环境友好并具有可见光光催化活性的第二代光催化剂将是光催化发展进一步走向实用化的关键。氮掺杂的TIO2是新发现的具有可见光光催化活性的复合光催化剂,非金属掺杂可以使复合物的复合禁带宽度小于TIO2的禁带宽度,从而使TIO2的吸收边向可见光移动。对TIO2的氮、碳、硫、卤素掺杂国内外研究现状进行了系统评述,分析了提高TIO2可见光活性的原因,指出非金属元素特别是氮元素的阴离子掺杂是在不降低紫外光催化活性的基础上实现可见光响应的较好方法。