Thermal characterization of n‐alkyl maleate‐styrene‐allyl propionate terpolymers

Thermal characterization of maleic anhydride‐styrene‐allyl propionate (MA‐St‐AP) terpolymer and its ester derivatives named as n‐alkyl maleate and shown as nPr MA‐St‐AP, nBu MA‐St‐AP, nPn MA‐St‐AP, and nBz MA‐St‐AP was carried out. The thermal characterization was performed using thermal analysis techniques such as TGA, DTA, DSC, and TMA. Different results were observed between the original terpolymer and its ester derivatives. Thermal stabilities of the terpolymer and its ester derivatives were compared by using various measurements plotted as TGA, DTA, DSC, and TMA curves. The increase in the alcohols' carbon numbers added to the original terpolymer results in ester derivatives with different thermal stability behavior. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 600–604, 2007     

苯丙烯酸邻菲罗啉铕钇配合物的合成及荧光特性

在乙醇介质中，合成了标题化合物，测定了其组成，红外光谱及荧光光谱，结果表明，羧酸的羟基氧及邻菲罗啉中的氮原子均与稀土离子配位，铕钇配合物的荧光强度值高于铕配合物。     

Synthesis and characterization of soluble (porphyrinato)iron(II) polymers

The use of (tetrakis(4-hexylphenyl)porphyrinato)Fe(II) in polymerization reactions with bidentate ligands such as 9,10-diisocyanoanthracene and 1,4-diisocyanobenzene led to well-defined stacked polymers1 and2 which are still soluble in common organic solvents such as chloroform, dichloromethane, and tetrahydrofurane. They have been completely characterized by¹H-NMR and UV/vis spectropscopy in solution, even allowing end-group analysis for determination of the average degree of polymerization, yieldingn=10 andn=5 for1 and2, respectively. Mößbauer and IR spectroscopy further established the strong Fe-CN bonding reflected by very small isomer shifts and quadrupole splittings (E _Q0.2 mm s^–1) and a large decrease in the IR stretching frequency (v _CN60 cm^–1). The axially stacked polymers exhibit semiconducting properties only upon doping.Presented at the 5th International Symposium on Macromolecule-Metal Complexes (MMV), Summer 1993 in Bremen, Germany.     

Formation of Polymeric Lewis Acid–Lewis Base Complexes with Well-defined Organoboron Polymers

The binding of Lewis bases to organoboron polymeric Lewis acids has been studied and the parameters that determine the complexation equilibrium have been investigated, which include (i) the strength of the individual Lewis acids and Lewis bases, (ii) concentration, and (iii) temperature. While the strongly Lewis acidic borane polymers poly(4-bis(pentafluorophenyl)borylstyrene) (PS-BPf) and poly(4-(di-2-thienylboryl)styrene) (PS-BTh) form isolable complexes with strong Lewis bases such as 4-t-butylpyridine (^tPy), a temperature dependent equilibrium is established with weaker bases such as THF. Similarly, the weakly Lewis acidic boronate polymer poly(4-diethoxyborylstyrene) (PS-BOEt) undergoes a temperature dependent equilibrium with the strong Lewis base 4-dimethylaminopyridine (DMAP), while poly(4-pinacolatoborylstyrene) (PS-BPin) does not significantly bind to pyridine bases. Decomplexation of PS-BTh· ^t Py is achieved by treatment with the stronger Lewis acid, B(C₆F₅)₃, thereby confirming the reversible nature of the polymeric Lewis acid–base adducts. This paper is dedicated to Professor Ian Manners in gratitude of his guidance throughout the years and recognition of his scientific accomplishments     

Preparation and characterization of multi-walled carbon nanotubes supported PtRu catalysts for proton exchange membrane fuel cells

A series of PtRu nanocomposites supported on H₂O₂-oxidized multi-walled carbon nanotubes (MWCNTs) were synthesized via two chemical reduction methods—one used aqueous formaldehyde (HCHO method) and the other used ethylene glycol (EG method) as the reducing agents. The effects of the solvents (water and ethylene glycol) and the surface composition of the MWCNTs on the deposition and the dispersion of the metal particles were investigated using N₂ adsorption, TEM, ICP-AES, FTIR and TPD. The wetting heats of the MWCNTs in corresponding solvents were also measured. The characterizations suggest that combination of the surface chemistry of the MWCNTs with the solvents decides the deposition and the dispersion of the metal nanoparticles. These nanocomposites were evaluated as proton exchange membrane fuel cell anode catalysts for oxidation of 50 ppm CO contaminated hydrogen and compared with a commercial PtRu/C catalyst. The data reveal superior performances for the nanocomposites prepared by the EG method to those by the HCHO method and even to that for the commercial analogue. Structure–performance relationship of the nanocomposites was also studied.     

Novel lanthanide salicylaldimine complexes with unusual coordination mode

The one-step metal promoted reaction between salicylaldehyde and 4-methyl-1,3-phenylenediamine in the presence of lanthanum(III) or gadolinium(III) nitrate yields new salicylaldimine complexes containing N,N′-bis(salicylidene)-4-methyl-1,3-phenylenediamine as a result of the [2 + 1] Schiff base condensation. The crystal structure of the gadolinium complex reveals a dinuclear species with four unionized ligands coordinating in the monodentate and bridging bidentate fashion, using exclusively the oxygens as donor atoms with the nitrogen atoms not being involved in coordination. The coordination number of nine is achieved by involving three bidentate nitrate counterions in the coordination sphere.     

芴甲氧羰基酪氨酸苄醚的合成研究

研究了硫酸铜存在下溴苄与酪氨酸反应生成酪氨酸苄醚,收率45%。反应中,铜盐先与酪氨酸的羧基作用,生成4∶1的酪氨酸铜配合物,从而有效地保护了酪氨酸的羧基,使苄基化反应选择性地发生在侧链酚基氧原子上。酪氨酸苄醚与芴甲氧羰酰氯在THF中反应得标题化合物,收率98%。     

不同二辛基二硫代磷酸金属配合物促进剂对NR性能的影响

研究了5种二辛基二硫代磷酸稀土配合物（REDODP）对天然橡胶（NR）硫化特性、力学性能和老化性能的影响，并与二辛基二硫代磷酸钾（KDODP）和二辛基二硫代磷酸锌（ZnDODP）进行了对比。结果表明，含REDODP的NR胶料的正硫化时间介于含ZnDODP和KDODP的胶料之间，但抗返原性比KDODP的好，而与ZnDODP的相近。由于REDODP促进剂中RE是三配位，胶料中RE含量较低，降低了硫化胶的交联密度，对力学性能有一定的影响，但硫化胶老化前后拉伸强度及拉断伸长率下降幅度低于含KDODP和ZnDODP的硫化胶，表明REDODP有利于提高NR硫化胶的耐老化性能。     

Studies on syntheses and properties of novel CeO2/polyimide nanocomposite films from Ce(Phen)3 complex

A series of cerium dioxide (CeO₂)/polyimide (PI) nanocomposites were successfully prepared from Ce(Phen)₃ and polyamic acid (PAA) via the solution direct-dispersing method, followed by a step thermal imidization process. TGA and XPS studies showed that the cerium complex decomposed to form CeO₂ during the thermal imidization process at 300 °C. SEM observation showed that the formed CeO₂ as nanoparticles was well dispersed in polyimide matrix with a size of about 50-100 nm for samples with different contents of CeO₂. Thermal analysis indicated that the introduction of CeO₂ decreased the thermal stability of nanocomposite films due to the decomposition of Ce(Phen)₃ in the imidization process, while the glass transition temperature (T_g) increased obviously, especially nanocomposite films with high loading of CeO₂ exhibited a trend of disappearance of T_g. DMTA and static tensile measurements showed that the storage modulus of nanocomposite films increased, while the elongation at break decreased with increasing CeO₂ content.     

A new class of corrosion inhibitors for waterborne coatings: 4-methyl-γ-oxo-benzene-butanoic acid complexes

Amine and transition metal based complexes with 4-methyl-γ-oxo-benzene-butanoic acid represent a new class of corrosion inhibitors specifically designed for long-term corrosion protection in waterborne coatings. Today, corrosion protection in waterborne technology is typically achieved using traditional anticorrosive pigments initially developed for use in solventborne coatings. Regulations concerning heavy metals and limitations regarding the compatibility and performance of such materials in waterborne coatings have created a need for novel approaches. Mechanistic aspects are discussed for the 4-methyl-γ-oxo-benzene-butanoic complexes based on electrochemical solution experiments (electrochemical impedance spectroscopy (EIS), linear sweep voltammetry (LSV)) and investigations performed on coated substrates. Exposure results underline the high efficiency of such complexes for both long-term corrosion protection and weld seam rust control in waterborne coatings.