Molecular dynamics studies of a model polymer-catalyst-carbon interface

Classical molecular dynamics simulations are performed to obtain insights into structural and dynamical behavior of water and O₂ transport through a model polymer membrane, and at the interface of such hydrated polymer with graphite-supported nanocatalyst platinum particles. Water clustering is observed near the membrane hydrophilic sites constituted by sulfonic groups, which due to their affinity with platinum, are located near the metallic surface. It is found that the diffusion of water through the model hydrated polymer membrane depends strongly on the level of membrane hydration due to contribution from various mechanisms whose relative weights change with the degree of hydration. Possible scenarios for O₂ diffusion are also analyzed.     

冷却器盘管失效分析及防范措施

本文介绍了冷却器盘管破裂泄漏的情况，分析了失效破坏的原因，并提出防止冷却器盘管破裂泄漏的措施。     

A PROCEDURE FOR EVALUATION OF COMMERCIAL FCC CATALYSTS

Based on the correlations between laboratory units and commercial plants, a procedure has been developed to guide commercial FCC (Fluid Catalytic Cracking) catalysts selection. Examining the operability of catalyst mixtures during catalyst transition period is emphasized. The testing procedure is simple and reliable. A commercially available catalyst and the catalyst currently in use have been compared to demonstrate the applicability of this procedure. The commercial testing has confirmed the reliability of laboratory results. The use of the catalyst evaluated led to a 30% saving in catalyst cost.     

Selective O-Alkylation Reaction of Hydroquinone with Methanol over Cs Ion-Exchanged Zeolites

O-alkylation reaction of hydroquinone with excess methanol was performed by using alkali metal ion-exchanged zeolite catalysts in a slurry type reactor to substitute the solid zeolite catalysts for the homogeneous liquid phase catalysts. This was also done to produce selectively mono-alkylated 4-methoxyphenol, a valuable intermediate for the perfume, flavor, food and photo industries. The effects of the basicity of various zeolites and reaction conditions such as temperature, reaction time and the amount of catalyst on the catalytic activity and selectivity were tested to maximize the yield of 4-methoxyphenol. Thus far, 84% selectivity at 95% conversion of hydroquinone was obtained at the optimum reaction conditions (240 ‡C, reaction with 0.6 g catalyst for 16 h), which was thought to result from the strong basic property and shape selectivity of the Cs ion-exchanged NaX zeolite.     

Characterization and performance of Pd-La/spinel catalyst for preparation of 2,6-diisopropylaniline

The Pd-La/spinel catalyst for the preparation of 2,6-diisopropylaniline (2,6-DIPA) by gas-phase amination of 2,6-diisopropylphenol (2,6-DIPP) has been studied. The catalysts before and after reaction were characterized by BET, XRD, differential thermal analysis (DTA)-thermo gravimetric analysis (TGA), FTIR, and NH₃-TPD techniques. The DTA study results show two kinds of coke deposited on the metal and support of Pd-La/spinel catalyst, and they are combusted at about 242 and 324 °C, respectively. The XRD and FTIR spectra of the Pd-La/spinel catalyst show that the coke contains the aromatic and aliphatic rings, alkyl groups, polynuclear aromatic system, hydroxyl groups, and amine groups. The reason for catalyst deactivation can be expressed as follows: coke formed on palladium metals may move from metal to the interface or boundaries of metal-support and acid sites of the support where further dehydrogenation and polymerization are occurring. The H₂ plays a key role in retarding coke formation, but must be in suitable amount to get relatively high selectivity. The rare earth promoter La not only promotes the activity and selectivity by retaining Pd species in the metallic state, but also decreases the formation of carbon by neutralizing the strong acid sites on the catalyst.     

煤气初冷器喷洒洗萘工艺的改进

针对初冷器喷洒洗萘存在的堵塞和阻力大等问题，相应采取了改进工艺和调整操作参数等措施，即确保了出厂煤气的质量，又提高了生产的安全性。     

酯交换法合成碳酸二苯酯研究进展

对碳酸二苯酯合成用催化剂、合成工艺、反应装置等进行了综述。认为国内应加强酯交换法合成碳酸二苯酯的基础研究 ,尽快实现其产业化     

C207甲醇合成铜基催化剂本征失活动力学

一、前言工业生产中广泛使用的甲醇合成铜基催化剂具有活性高、选择性好、起始活性温度低等优点。但铜基催化剂抗毒性能差,影响了它的使用寿命。铜基催化剂的主要毒物是原料气中所含的 H_2S。铜基催化剂 H_2S 中毒失活研究,国内未见报道,美国的 Wood 等和 Rdvodic 等作过一些研究。本文通过对国产 C207铜基催化剂硫化氢中毒失活动力学的研究,建立描述活性衰退过程的失活动力学方程,得到活性与硫化     

TiO_2－Al_2O_3复合载体在石油化工催化剂中的应用

介绍了ＴｉＯ_２－Ａｌ_２Ｏ_３复合载体的制备方法及其物化性能。以此载体研制出的ＢＹ型裂解汽油加氢催化剂各项性能指标均符合标准值的要求；并在工业使用中取得了较好的效果。     

Catalytic characteristics of various rubber-reinforcing carbon blacks in decomposition of methane for hydrogen production

Carbon black has recently been reported to act as an effective catalyst for methane decomposition and to exhibit stable catalytic behavior despite carbon deposition, and thus it can be used for CO₂-free production of hydrogen from natural gas. In this work, various carbon blacks with different primary particle size were investigated with respect to methane decomposition under atmospheric pressure from 1123 to 1223 K. Catalytic characteristics, such as activity, activation energy and reaction order, were investigated and compared. It was observed that with decreasing primary particle size (or increasing specific surface area), the specific activity increased and the activation energy decreased. The reaction orders for various pelletized, rubber-reinforcing carbon blacks were 0.6–0.7, about the same regardless of the primary particle size, while they were near 1 for fluffy carbon blacks. Fluffy carbon black showed higher activity and activation energy than the pelletized carbon black of the same primary particle size. Changes of the surface morphology during carbon deposition were observed by TEM. Variations of the number of active sites were discussed in regard of the primary particle size, carbon deposition and binder. The presence of different types of active sites was also suggested.