Studies on crystallization behaviors and crystal morphology of polyamide 66/clay nanocomposites

X‐ray diffraction methods, DSC thermal analysis, and polarized light microscopy (PLM) were used to investigate the structural changes of nylon 66/clay nanocomposites. PA 66/clay nanocomposites were prepared by the method of melt intercalation. The results indicate that the addition of the intercalated organo‐montmorillonite (OMMT) can induce generation of the β‐form crystal of PA 66 and substantially affect the arrangement of molecules in the α‐form crystal, although the crystallinity scarcely changes. Also, the DSC results indicate that the addition of OMMT in the PA 66 matrix leads to increases of crystallization temperatures and the full width at half maximum (FWHM) of the exothermic peaks. Moreover, the viscosity factor is the main influence on FWHM of the exothermic peaks of PA 66/clay nanocomposites. The results of nonisothermal crystallization kinetics show that OMMT has the effect of heterogeneous nucleation and leads to the decrease of the size of the spherocrystal. The heterogeneous nucleation effects of OMMTs influence the mechanism of crystallization and the growth mode of PA 66 crystals. PLM photographs verify that the size of spherocrystal is decreased and visually confirm the theory of crystallization kinetics. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 756–763, 2005     

Structural changes and mechanical performance of recycled poly(vinyl chloride) bottles exposed to ultraviolet light at 313 nm

The structural changes and mechanical performance of virgin poly(vinyl chloride) (PVC) bottle (VB) compounds blended with postconsumer PVC bottles collected from a specified factory (RB‐F) and houses (RB‐H), were examined before and after UV irradiation at 313‐nm UV wavelength for different periods of time up to 28 days. The results indicated that, when exposed to UV light, the RB‐F/VB blends containing greater conjugated double bonds with higher yellowness index appeared to exhibit better mechanical performance than that of the RB‐H/VB blends. It was found that the amount of conjugated double bonds was not a linear function of the discoloration level of PVC compounds. Tensile strength of the VB compounds was not affected when incorporated with RB‐F recyclate, but progressively decreased with increasing RB‐H recyclate. An optimum concentration for RB recyclates to be added into the virgin compound was recommended for obtaining a maximum impact strength. Both tensile and impact strengths decreased with increasing UV exposure time, a severe degradation being obvious after a UV exposure time of 21 days. Hardness was not affected significantly by the addition of PVC recyclate, but increased with increasing UV exposure time. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 84–94, 2004     

Embedding poly(styrene sulfonic acid) into PVDF matrix—a new type of proton electrolyte membrane

Hydrophilic polymer segments, consisting of styrene sulfonic acid (SSA) units, were uniformly embedded into hydrophobic poly(vinylidene fluoride) (PVDF) matrix through the mediation of poly(methyl methacrylate) (PMMA) segments, with which SSA segments form a copolymer. Discrete domains (∼100 nm) assembled by the SSA segments have been identified throughout the matrix of the membrane, which was prepared through blending of the copolymer P(MMA-SSA) and the PVDF. The thermal stability of the SSA was largely boosted in such hydrophobic environment. This unique matrix structure offers proton conductivity of as high as 10⁻³ S/cm at a low SSA equivalent (0.6 mmol -SO₃H/g of membrane), which is accompanied with a low level of water uptake (26%) at ambient temperature. Using this type of polymer membrane as electrolyte, the electrochemical cell possesses obvious capacitive resistance when the membrane is in the anhydride form according to the impedance analysis. However, the capacitive character vanishes when the membrane is hydrated; this response is attributed to the existence of highly dispersed SSA domains in the membrane. This work also analyzes the impedance spectra of the membranes at different hydrated states or with different SSA contents by using an equivalent electrical circuit.     

Chromatographic performance of monodisperse–macroporous particles produced by “modified seeded polymerization.” I: Effect of monomer/seed latex ratio

In this study, the monodisperse–macroporous particles produced by a relatively new polymerization protocol, the so‐called, “modified seeded polymerization,” were used as column‐packing material in the reversed phase chromatography (RPC) of proteins. The particles were synthesized in the form of styrene‐divinylbenzene copolymer approximately 7.5 μm in size. In the first stage of the synthesis, the monodisperse polystyrene particles 4.4 μm in size were obtained by dispersion polymerization and used as the “seed latex.” The seed particles were swollen by a low‐molecular‐weight organic agent and then by a monomer mixture. The monodisperse–macroporous particles were obtained by the polymerization of monomer mixture in the seed particles. In the proposed polymerization protocol, the number of successive swelling stages was reduced with respect to the present techniques by the use of sufficiently large particles with an appropriate average molecular weight as the seed latex. A series of particles with different porosity properties was obtained by varying the monomer/seed latex ratio. The separation behavior of HPLC columns including the produced particles as packing material was investigated in the RPC mode using a protein mixture including albumin, lysozyme, cytochrome c, and ribonuclease A. The chromatograms were obtained with different flow rates under an acetonitrile–water gradient. The theoretical plate number increased and chromatograms with higher resolutions were obtained with the particles produced by using a lower monomer/seed latex ratio. The separation ability of the column could be protected over a wide range of flow rates (i.e., 0.5–3 mL/min) with most of the materials tested. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 607–618, 2004     

Outdoor attractancy of males ofMatsucoccus josephi (Homoptera: Matsucoccidae) andElatophilus hebraicus (Hemiptera: Anthocoridae) to synthetic female sex pheromone ofMatsucoccus josephi

The active component of the sex pheromone ofMatsucoccus josephi is (2E,6E,8E)-5,7-dimethyl-2,6,8-decatrien-4-one; the chemical is also a powerful kairomone of adult males and females of the bugElatophilus hebraicus the principal predator ofM. josephi. The presence of theZ isomer (2E,6Z,8E)-5,7-dimethyl-2,6,8-decatrien-4-one does not interfere with the attractancy of the activeE component forM. josephi males or the bug. Our results show a clear dose-response between trap catch ofM. josephi males andE. hebraicus. Conversely, increasing amounts of theZ isomer in the mixture did not affect the attraction of the scale insect males or the bug. The catch ofM. josephi males did not differ significantly among traps of different color, and was significantly higher with traps attached to the tree trunk than those suspended between trees. Comparison of the catch ofM. josephi among the three forests and between pine species suggests that the level of infestation ofPinus halepepsis andPinus brutia ssp.brutia is similar, despite the fact that the latter pine is resistant to the scale insect. Both sexes ofE. hebraicus were trapped in much lower numbers at the more infested sites. This may be related to interference with the activity ofE. hebraicus due to deterioration and drying of parts of the tree crowns and heavy colonization by generalist predators in injured trees.     

Hydrosilylation and dehydrocondensation reactions of methylhydridesiloxane to acrylic and methacrylic acids

The hydrosilylation of α,ω‐bis(trimethylsiloxy) methylhydridesiloxane (degree of polymerization ≈ 53) with acrylic and methacrylic acid with various ratios of the initial compounds, in the presence of platinum hydrochloric acid, has been investigated. In the presence of platinum hydrochloric acid, competitive dehydrocondensation reactions take place with the formation of various oligomers with various chemical links. In the later stages of the reaction, three‐dimensional systems have been obtained. During dehydrocondensation, the reaction order, reaction rate constants, and activation energy have been determined. The structures of the synthesized oligomers have been determined with IR and NMR spectroscopy data. Gel permeation chromatography, differential scanning calorimetry, and X‐ray analyses of the synthesized oligomers have been carried out. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3243–3252, 2007     

快速法测定AES中未硫酸化物的含量

讨论了一种快速测量AES中未硫酸化物的方法。首先将配制好的AES-乙醇溶液，通过离子交换树脂，然后收集、蒸馏、干燥得到的液体，称重后即可得到未硫酸化物的含量，采用该方法比国家标准节约2．5～3h的分析时间。     

2-[N-甲基-N-(2-吡啶基)氨基] 乙醇制备条件的优化

2-[N-甲基-N-(2-吡啶基)氨基]乙醇是合成罗格列酮(Rosighitazone)的一种中间体，罗格列酮是新型噻唑烷二酮类胰岛素增敏剂，通过两轮优化设计，实验室小试得到了较好的反应条件．为工业化生产提供了基础数据。     

薄板坯连铸浸入式水口结构数值模拟

使用有限元计算方法开展薄板坯连铸浸入式水口流场的研究 ,分别对水口不同浸入深度的流场分布、水口出口不同角度的流场分布进行计算。结果发现 :水口的浸入深度在 30 0mm时较为合理 ;水口的出口角度以R1 5、60°、45°为宜