Eosin-G and ethyl eosin dye sensitized CdS nanowires towards dye sensitized solar cells applications

One dimensional (1-D) CdS nanowires have been grown through a low temperature chemical route and have been sensitized with eosin-G and ethyl eosin dyes to broaden the absorption spectrum of CdS and to enhance the photoelectrochemical (PEC) performance under illumination. The used method is advantageous due to its simplicity, low cost, scalability, and controllability. Interestingly, eosin-G and ethyl eosin dyes yield nearly four- and six-fold increase in device efficiency compared to bare CdS when tested in dye-sensitized solar cell assembly. Structural, surface morphological, optical, and surface wettability studies have been formulated for CdS, whereas identification of materials along with PEC investigations were conducted through current density–voltage (J-V), external quantum efficiency (EQE), characteristics under the illumination of 94.6 mW/cm² (AM 1.5G), and electrochemical impedance spectroscopy (EIS).     

有机-无机复合CdS纳米晶的制备及表征

本文采用液液两相法,在甲苯、甲醇和水两相体系中制备了烷基硫醇和芳杂环硫醇修饰的有机-无机复合的CdS半导体纳米晶.通过紫外可见吸收光谱、X-射线光电子能谱、X-射线粉末衍射、透射电子显微镜、元素分析和热重分析检测手段对样品的结构和组成进行了表征.结果表明:该方法所制备的硫化镉纳米晶是由无机纳米核及通过化学键吸附在其表面的硫醇分子所组成.纳米晶的平均粒径约为5nm,尺寸均匀,稳定性高,在空气中可长时间保存.     

The construction of 3D hierarchical CdS/NiAl-LDH photocatalyst for efficient hydrogen evolution

The development of excellent photocatalysts for hydrogen evolution is of great significance to solving the global energy crisis. In this work, a novel 3D hierarchical CdS/NiAl-LDH photocatalyst was fabricated by a facile electrostatic assembly strategy, which was composed of 1D CdS nanorods and 3D flower-like NiAl-LDH microspheres. Under the visible irradiation, the CNA-20 hierarchical photocatalyst presents the optimum hydrogen evolution rate achieved to 3.24 mmol g^?1 h^?1, which is improved 6.23-fold in comparison with the pure CdS. Through the analysis of energy band structures and first-principles calculation, the type-Ⅱ charge transfer mechanism was proposed. Driven by the built-in electric field, as well as the effect of intimate interface contact of CdS and NiAl-LDH, the photogenerated charge could be achieved rapidly separate and migrate, which effectively promotes the H₂ evolution. This well-designed synergistic 1D/3D interface interaction and provides an economic approach to rationally developing metal-free photocatalysts for hydrogen production.     

Sulfur vacancy and CdS phase transition synergistically boosting one-dimensional CdS/Cu2S/SiO2 hollow tube for photocatalytic hydrogen evolution

Constructing an efficient photoelectron transfer route to improve carrier separation efficiency is crucial for photocatalytic hydrogen evolution. In this work, CdS/Cu₂S/SiO₂ heterostructure with one-dimensional hollow tube morphology was designed by the solvothermal method using CuO/SiO₂ hollow tube as carrier. The hexagonal phase CdS and sulfur vacancies were adjusted simultaneously by the reduction strategy of NaBH₄ aqueous solution. CdS/CuS/SiO₂ with cubic phase CdS was synthesized in the absence of NaBH₄ aqueous solution. CdS/Cu₂S/SiO₂ was characterized by SEM, TEM, XRD, XPS, SPV and so on. The results showed that hexagonal CdS and sulfur vacancies benefited the separation of photo-generated carriers. As a consequence, the CdS/Cu₂S/SiO₂-10 composite exhibited a high photocatalytic hydrogen production rate (1196.98 μmol/g/h), and its performance almost 7.18 times than that of CdS/CuS/SiO₂. Moreover, CdS/Cu₂S/SiO₂-10 showed an excellent cyclic stability. This was attributed to the strong electron interaction of CdS/Cu₂S/SiO₂ heterostructure and the sulfur vacancy acted as an electron trap, enhancing the separation of photo-induced electrons and holes.     

Study on photocatalytic performance for hydrogen evolution over CdS/M-MCM-41 (M = Zr, Ti) composite photocatalysts under visible light illumination

A series of CdS/M(x)-MCM-41 (M = Zr, Ti, x stands for molar ratio of M/Si) photocatalysts were preprared by hydrotherm, ion-exchange and sulfidation process. The catalysts were characterized by X-ray diffraction, UV-vis spectra and N₂ adsorption-desorption isotherm et al. The characterization results shown that Zr or Ti was successfully doped into the mesoporous of MCM-41, and CdS was also successfully incorporated into such modified mesoporous. The results of photocatalytic performance for hydrogen production shown that CdS/Zr(0.005)-MCM-41 and CdS/Ti(0.02)-MCM-41 had the highest hydrogen evolution activity in triethanolamine aqueous solution under visible light (λ > 430 nm) irradiation, which can be explained by the diffusion velocity of the reactants and resultants and the protection which MCM-41 provided for CdS.     

Facile preparation of ZnS/CdS core/shell nanotubes and their enhanced photocatalytic performance

In this paper, ZnS/CdS core/shell nanotubes were successfully synthesized by combining hydrothermal treatment and ion exchange conversion, and the significant influence of CdS content in the shell on photo absorption and photocatalytic activity was also investigated. The core/shell nanotubes structure of CdS deposition on both sides of ZnS nanotube was confirmed by scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM). The room temperature PL spectra of ZnS/CdS core/shell nanotubes indicated that CdS on the shell can reduce the recombination of photon-generated electron and hole. The photocatalytic activity tests prove that ZnS/CdS nanotubes have much higher photocatalytic hydrogen production activity than ZnS nanotube and CdS nanotube. Under the irradiation of visible light, the highest photocatalytic hydrogen production rate of 110 μmol h⁻¹ g⁻¹ is observed over the ZnS/CdS core/shell nanotubes with CdS/ZnS molar ratio of 1:4, which is about 11.02 and 5.56 times more active than ZnS nanotube and CdS nanotube, respectively. The improved performance of ZnS/CdS samples can be due to the strong photo response in the visible light region and the efficient separation of electron–hole pairs.     

Interfacing CdS particles on Ni foam as a three-dimensional monolithic photocatalyst for efficient visible-light-driven H2 evolution

Solar photocatalytic water splitting using particulate semiconductors has been valued as a potentially scalable way for the production of clean H₂ energy, yet the performances of the powder-suspension systems are constrained by insufficient utilization of light energy and tedious recycling of photocatalyst particles. Here, we present a high-performance photocatalytic H₂ evolution using a visible-light-driven CdS-based monolithic photocatalyst with three-dimensional (3D) heterostructure. The monolithic photocatalyst is fabricated by firmly growing CdS microspheres on a Ni(OH)₂ nanosheet-modified Ni foam (NF) (denoted as CdS-NiS_x/NF) via a simple hydrothermal process. The structure and component synergy endows the monolithic CdS-NiS_x/NF photocatalyst advantageous features including high-density CdS microspheres for visible light harvesting, multiple heterojunction interfaces for efficient electron-hole separation, and abundant interfacial NiS_x active sites for efficient H₂ evolution reaction (HER). Upon visible light irradiation, the monolithic CdS-NiS_x/NF photocatalyst exhibits an outstanding photocatalytic H₂ evolution activity with an enhanced rate of 6.2 mmol·h⁻¹ g⁻¹_CdS, which is 6 times higher than that of the suspended CdS powder. In addition, the structural integrity of the CdS-NiS_x/NF enables a good stability for H₂ evolution over a 30 h reaction. This monolithic photocatalyst is scalable in preparation and compatible for device fabrication, which offers great potentials for applications in solar cells, photoelectrocatalysis, and electrocatalysis.     

A study of vapor CdCl2 treatment by CSS in CdS/CdTe solar cells

We report the effect of CdCl₂ vapor treatment on the photovoltaic parameters of CdS/CdTe solar cells. Vapor treatment allows combining CdCl₂ exposure time and annealing in one step. In this alternative treatment, the CdS/CdTe substrates were treated with CdCl₂ vapor in a close spaced sublimation (CSS) configuration. The substrate temperature and CdCl₂ powder source temperature were 400 °C. The treatment was done by varying the treatment time (t) from 15 to 90 min. Such solar cells are examined by measuring their current density versus voltage (J-V) characteristics. The open-circuit voltage (V_oc), short circuit current density (J_sc) and fill factor (FF) of our best cell, fabricated and normalized to the area of 1 cm², were V_oc = 663 mV, J_sc = 18.5 mA/cm² and FF = 40%, respectively, corresponding to a total area conversion efficiency of η = 5%. In cells of minor area (0.1 cm²) efficiencies of 8% have been obtained.     

Photocatalytic hydrogen production using Fe2O3-based core shell nano particles with ZnS and CdS

Stability and efficiency of photocatalysts are important to realize the practical applications of them for photocatalytic hydrogen production from industrial sulfide effluent. Novel, magnetically separable core–shell nano photocatalysts viz., CdS/Fe₂O₃, ZnS/Fe₂O₃ and (CdS + ZnS)/Fe₂O₃ were prepared and their hydrogen evolution activity under visible light was examined. The XRD result shows that CdS and ZnS were very well coated on the surface of the iron oxide core shell particles. The HR-TEM result also confirms the core shell formation. (CdS + ZnS)/Fe₂O₃ evolved higher volume of hydrogen than the other catalysts. It is ascribed to rapid migration of excited electrons from (CdS + ZnS) toward Fe₂O₃ suppressing electron hole annihilation compared to other catalysts. The catalysts can be easily recovered from the reaction medium using external magnetic bar and so the photocatalyst can be reused without any mass loss. Hence, it can be a potential catalyst for recovery of hydrogen from industrial sulfide containing waste streams.