环境友好催化剂催化合成己二酸二乙酯

评述了强酸性阳离子交换树脂、十二水合硫酸铁铵、硫酸铜、一水硫酸氢钠、固体超强酸、杂多酸和分子筛催化制备己二酸二乙酯的方法。阐述了在上述催化剂作用下的反应条件、催化剂的性质以及合成工艺的特点,列举了各种催化剂在反应时间、带水剂、产率以及是否可重复使用等方面所具有的优势,指出上述讨论的几种固体催化剂都是合成己二酸二乙酯的优良催化剂。     

微波在无机合成中的应用

介绍了微波的作用机理和特点，同时综述了微波在催化材料的合成过程中以及在合成纳米材料时的热处理方面有着传统加热方法无可比拟的优势，并介绍了微波烧结方法在陶瓷工业方面的应用，最后对微波在无机合成中的应用前景作了展望。     

黑方台焦家4号黄土滑坡发育特征及滑动机理

20世纪60年代以来,大量的灌溉系统在黄土地区建设运营,解决了农业的干旱问题,但同时灌溉也诱发了大量的滑坡。其中,2015年1月28日20:00,甘肃省永靖县焦家村发生了一起中等规模的黄土滑坡,滑坡严重影响其下方309国道线和六盘峡水库的安全。采用对裂缝分布、水文地质的调查,结合低空摄影测量、精细工程地质测绘、室内三轴试验等研究方法,对焦家4号滑坡的基本特征进行了分析,对形成滑坡的成灾机理有了初步认识。结果表明:(1)滑坡发生前,后缘裂缝有明显的变形情况;(2)滑坡滑动距离为548.3 m,体积为15.35万m~3,面积为6.6万m~2;(3)饱和黄土应力应变模式表现为强烈的应变软化剪缩型,并具有一定的静态液化特性;(4)滑坡是饱和黄土层静态液化引起的。     

Biocidal hydantoinylsiloxane polymers. IV. N‐halamine siloxane‐functionalized silica gel

The monomer 5,5‐dimethyl‐3‐(3′‐triethoxysilylpropyl)hydantoin and its hydrolysis product polymer poly[3‐(5,5‐dimethylhydantoinylpropyl)hydroxysiloxane] were employed to functionalize the surfaces of silica gel particles in order to produce an adhered film that becomes biocidal upon chlorination with dilute sodium hypochlorite bleach. The biocidal efficacy of the functionalized silica gel was demonstrated in a cartridge filter experiment against the bacterial pathogens Staphylococcus aureus and Escherichia coli O157:H7. Complete 6 log inactivations of the two bacterial species were observed within 30 s of contact. Moreover, upon loss of biocidal activity due to depletion of bound chlorine, the coated silica gel particles could be recharged by further exposure to dilute bleach. Potential uses of the biocidal silica gel include disinfection and odor control in water treatment facilities and recirculating baths. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3448–3454, 2006     

[Cu_2(Gly—GlyO)_2(OH)_2(4,4—bpy)]·9H_2O配合物合成、晶体结构研究

采用Gly—GlyOH,4,4＇—联吡啶与Cu(NO_3)_2·H_2O在二次水溶液中反应,合成出以4,4＇—bpy为中继基,Gly—Glyo为螯环新型双核铜配合物。经X射线单晶结构分析确定该配合物品体的化学结构式:[(H_2NCH_2CONHCH_2COO) Cu(OH) (C_(10)H_8N_2)Cu(OH) (H_2NCH_2CONHCH_2COO)]·9H_2O.晶体属于三斜晶系,P_空间群,晶胞参数a=1.1412nm,b=1.2298nm,C=1.4269nm,α=113.82°,β=101.91°,y=103.64°,V=1.6747nm~3,Z=2。衍射数据是在Nicolet XRD R3型四圆衍射仪上收集,结构参数经块矩阵最小二乘法精修后,最终一致性因子R值为0.068,RW值为0.057。     

Si3N4结合SiC窑具的研制及应用

本文根据试验确定了工艺路线,介绍了氯化烧成机理、原材料的选择及生产工艺对制品的影响,生产出的制品技术指标先进,性能优良。作为更新换代的新型窑具材料具有显著的经济效益和社会效益,有着广泛的使用价值。     

有机硅乳液稳定性的研究

以阳离子型乳液聚合为例，详细讨论了聚合反应因素及环境因素对环氧改性有机硅乳液稳定性的影响。结果表明：在聚合反应温度为65℃、催化剂的用量为总加料量的0．3％～0．5％、硅烷偶联剂的用量为D4质量的3％～5％、乳化剂用量为总加料量的10％、阳／非离子型乳化剂的质量比为1．5～1．8、D4与水的质量比为0．3～0．4条件下，制得的环氧改性有机硅乳液稳定性良好；采取急冷的方式中止聚合反应，并以醋酸中和至pH值为6～7，有利于环氧改性有机硅乳液稳定性的提高。     

扬子PTA装置加氢反应条件的优化

对扬子PTA装置改造后加氢精制工艺条件的优化进行了探讨,确定了主要工艺参数:反应压力7.0～7.25MPa,反应温度282～283℃,配料质量分数27%～28%,催化剂充填量10500～11000kg。综合其他改造后,使PTA装置达到年产60万t,能耗比原设计有较大降低。     

Rheological study on O−carboxymethylated chitosan/cellulose polyblends from LiCl/N,N‐dimethylacetamide solution

An O?carboxymethylated chitosan (O? CMCh) water solution (I) and N,N‐dimethylacetamide (DMAc) emulsion (II) were blended with a cellulose LiCl/DMAc solution, and corresponding polyblends (Polyblends I and II) were obtained. The rheology of the three fluids, that is, the cellulose solution and Polyblends I and II, was investigated. The cellulose solution was characterized by a power‐law fluid. When an O‐CMCh water solution or DMAc emulsion was added to the cellulose solution, the power‐law curve was preserved. The power‐law indexes (n) of all three fluids increased along with the temperature. Polyblend I displays an n close to but a little higher than that of the cellulose solution, while Polyblend II shows a much higher power index than those of the other two fluids. The values of the apparent viscosity (η_a) for all the three fluids are close and decrease along with an increase in the temperature. Adding O‐CMCh microparticles into Polyblends I and II results in a decrease in the structural viscosity index (Δη) in comparison to that of the cellulose solution, and this effect is very obvious for Polyblend I. A cellulose solution's Δη declines with the augmentation of temperature, while the Δη's of both Polyblends I and II show minimum values at about 323 K. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1719–1725, 2003     

Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composite material synthesized by a novel sol–gel method

A novel sol–gel method based on V₂O₅·nH₂O hydro-gel was developed to synthesize nanocrystalline Li₃V₂(PO₄)₃/carbon composite material. In this route, V₂O₅·nH₂O hydro-gel, NH₄H₂PO₄, Li₂CO₃ and high-surface-area carbon were used as starting materials to prepare precursor, and the Li₃V₂(PO₄)₃/carbon was obtained by sintering precursor at 750 °C for 4 h in flowing argon. The sol–gel synthesis ensures homogeneity of the precursors and improved reactivity. The sample was characterized by XRD, SEM and TEM. X-ray diffraction results show Li₃V₂(PO₄)₃ sample is monoclinic structure with the space group of P2₁/n. The TEM image indicates that the Li₃V₂(PO₄)₃ particles modified by conductive carbon are about 70 nm in diameter. The Li₃V₂(PO₄)₃/carbon system showed that the discharge capacities in the first and 50th cycle are about 155.3 and 143.6 mAh/g, respectively, in the range of 3.0–4.8 V. The sol–gel method is fit for the preparation of Li₃V₂(PO₄)₃/carbon composite material which may offer some favorable properties for commercial application.