焚烧灰造粒水泥玻璃固化体抗浸出性能研究

对焚烧灰造粒水泥玻璃固化体的抗浸出性能进行了研究,研究内容包括焚烧灰造粒水泥玻璃固化体的抗浸出性能和水泥玻璃净浆固化体的抗浸出性能。结果表明,在焚烧灰造粒水泥玻璃固化的基础配方(硬化剂,30%;水玻璃,66%;水泥,3%;外加剂,1%)上制备的焚烧灰造粒水泥玻璃固化体和净浆固化体的抗浸出性能好于水泥固化体的国家标准规定的要求,对于核素85Sr和134Cs,第42天的浸出率均≤1.5×10-4cm/d,累积浸出分数均小于6.23×10-2cm。     

高性能混凝土配合比设计的试验研究

从对HPC组成、结构的认识出发，借鉴利用拨开系数求砂率的方法，提出了一种新的HPC配制方法，并通过试验证实该方法是完全可行的．     

Experimental design with fuzzy levels

A novel technique is introduced for planning experimental design employing fuzzy rule-based systems. The significant aspect of the proposed experimental design with fuzzy levels (EDFL) is assigning a membership function for each level of variable factors. Consequently, the design matrix and observed responses can be represented in a set of fuzzy rules. Several examples are presented to clarify the proposed idea and the results are compared with the conventional Taguchi methodology. We have specifically planned an L18 orthogonal array EDFL for the solder paste printing stage of surface mount printed circuit board assembly to provide a model for the process and to optimize the selection of variable factors.     

适合铝丝键合后热老化要求的金导体浆料

研究了一种适合铝丝键合后热老化要求的金导体浆料，性能达到使用要求。在金浆中添加了少量合金元素，并选用混合型粘结剂。对金导体铝丝焊后热老化失效机理以及添加合金元素的作用，进行了讨论     

广钢电炉粉尘分析及治理利用探讨

对广州钢铁厂含铅锌电炉粉尘进行了分析测定，提出将电炉粉尘用作水泥生产铁质校正料的设想，并进行了可行性试验。     

混粉电火花加工在模具制造中的应用

通过对混粉电火花加工工艺与传统模具制造工艺的比较，从混粉电火花加工工艺的机理、表面特性、影响因素等各方面来阐述，混粉电火花加工是生产高精度、高寿命、效率的模具的最有效的工艺之一。     

Crack Growth Resistance of Hybrid Fiber-Reinforced Cement Matrix Composites

The effect of hybrid fiber reinforcement on fracture energy and crack propagation in cement matrix composites is examined. The crack in cement matrix composites is allowed to fracture under mode-I loading with three-point bending beam specimens. The influence of fiber types and their combination is quantified by using the toughness index and fracture energy. A proper hybrid combination of steel fibers and polyvinyl alcohol microfibers enhances the resistance to both the nucleation and growth of the crack. The micromechanical model of hybrid composites by using a fiber bridging law is emphasized, and the numerical model prediction closely matches the behavior obtained from the experiment. The influencing role of the material parameters in the fracture tests (e.g., the fracture toughness index and fracture energy) becomes more apparent than ones used in some conventional strength-based or fiber pullout tests, and these fracture parameters could screen the effect of fiber/microfiber reinforcement in enhancing the crack growth resistance of cementitious composites. This study demonstrates that fundamental fracture tests are effective to characterize and develop high-performance hybrid fiber–reinforced cement matrix composites.     

组成无公害低熔玻璃的发展现状

低熔玻璃广泛用作封接玻璃和电子浆料中的粘接相.现有低熔玻璃绝大部分为高铅含量玻璃.提出组成中不合PBb、Hg、Cd、As、Tl、Cr和放射性元素的玻璃称为组成无公害玻璃,综述了低熔玻璃的发展现状,指出电子产品目前所用含铅玻璃的取代物可能是磷酸盐、矾酸盐、铋酸盐玻璃.建立磷酸盐、矾酸盐、铋酸盐玻璃相关基础理论,发展玻璃形成新理论以及新的材料制备技术是组成无公害低熔玻璃研究与开发的重点.     

Effect of compressive stress on the ferroelectric hysteresis behavior in 0-3 PZT-cement composites

Lead zirconate titanate (PZT)-cement composites of 0-3 connectivity were produced using 50% PZT vol. content. PZT-cement based composites are developed for use as sensors for smart concrete structures, however, these sensors would in real life be under a certain stress. The effect of stress on the ferroelectric polarization-electric field (P-E) hysteresis of the composites is reported in this present work. It was found that there was a small but noticeable reduction in the remnant polarization (P_ir) by ≈ 0.3-0.7 μC/cm² while the coercive field (E_ic) remained approximately the same when the stress was increased from 0 to 57 MPa.     

水泥浆体中连续粒径粉体的堆积密度研究

为了研究粒径分布对水泥石结构与性能的影响,通过测定多组粒径分布不同的矿粉在流动度相同情况下的需水量,得到矿粉不同粒径分布所对应的不同的堆积密度,推导了浆体中连续粒径粉体的堆积密度公式。用该公式计算上述不同粒径分布的矿粉浆体的堆积密度及需水量,计算结果与试验值基本吻合。说明该公式可以用来模拟诸如水泥、磨细矿渣、粉煤灰等胶凝材料细颗粒的堆积密度。