Fabrication of TiO2 composite materials for air purification by magnetic field effect and electrocodeposition

Novel air purification materials were fabricated by the application of a magnetic field. In a magnetic field perpendicular to a copper plate, nickel particles with a diameter of 10 m were arranged to form numerous pillar-like structures on the matrix surface, and copper as a binder was deposited onto the three-dimensional surface. The total surface area of the pillars and the matrix increased with the magnetic flux density, up to about 800 cm² per cm² of the original matrix surface at 6.2 T. After successful codeposition of TiO₂ particles on the fabricated materials by electroplating, their photocatalytic activities were evaluated on the basis of the removal efficiency of nitrogen oxides (NO _x ), which are some of the most hazardous air pollutants. It was concluded that the samples with the pillar-like structures had two opposite characteristics: large surface area as a positive effect and shadowing against ultraviolet (UV) irradiation as a negative effect. However, total photocatalytic activity increased to twice as much as that of the flat sample by improving the UV irradiation method and the preparation condition of the materials     

Surface Areas of Nitrated Hydrotalcites

Hydrotalcites in the nitrate form were prepared using microwave irradiation in the hydrotreatment step. The surface area (BET) of nitrated hydrotalcites was evaluated. Solids were characterized by atomic absorption, X-ray diffraction and BET analysis. Thermal pretreatment temperature determined the surface area of the hydrotalcites.     

Studies on phytosterol oxides. II: Content in some vegetable oils and in French fries prepared in these oils

Hydrogenated rapeseed oil/palm oil blend, sunflower oil and high-oleic sunflower oil, and French fries fried in these oils were assessed for contents of sterol oxidation products. Different oxidation products of phytosterols (7α- and 7β-hydroxy-sito-and campesterol, 7-ketosito- and 7-ketocampesterol, 5α,6α-epoxy-sito- and campesterol, 5β,6β-epoxy-sito-and campesterol, dihydroxysitosterol and dihydroxycampesterol) were identified and quantiated by gas chromatography (GC) and GC-mass spectroscopy. Rapeseed oil/palm oil blend contained 41 ppm total sterol oxides before frying operations. After two days of frying, this level was increased to 60 ppm. Sunflower oil and high-oleic sunflower oil had 40 and 46 ppm sterol oxides, respectively, before frying operations. After two days of frying operations, these levels increased to 57 and 56 ppm, respectively. In addition to campesterol and sitosterol oxidation products, small amounts of 7α- and 7β-hydroxystigmasterol were detected in the oil samples. Total sterol oxides in the lipids of French fries fried at 200°C in rapeseed oil/palm oil blend, sunflower oil, and high-oleic sunflower oil were 32, 37, and 54 ppm, respectively. The levels of total oxidized sterols, calculated per g sample, ranged from 2.4 to 4.0 ppm. In addition to the content of phytosterol oxides, full scan mass spectra of several oxidation products of stigmasterol are reported for the first time. Part of these results were presented at the 86th Annual Meeting of the AOCS, May 7–11, 1995, San Antonio, TX.     

国外过氧化氢在化学合成中应用研究进展

介绍了近期国外过氧化氢在部分化学品合成中应用研究新进展 ,产品包括过碳酸钠、过碳酰胺、4Na2 SO4·2H2 O2 ·NaCl加合物、叔胺氧化物、水合肼、二羟基苯、季铵盐过氧化氢和甲乙酮肟。内容涉及产品质量 (纯度、安定性、溶解速率、外观等 )、产品收率、催化剂、工艺过程等方面改进。主要介绍专利技术。     

Oxidation of acrolein on a multicomponent oxide catalyst

Catalytic oxidation of acrolein to acrylic acid has been studied and the optimum composition of the multicomponent catalyst Mo _a V _b Cu _c Fe _d O _x has been found. The reaction kinetics has been measured.     

常压气固催化间甲苯胺N-乙基化研究

合成了复合金属氧化物催化剂 ,进行了以乙醇和间甲苯胺为原料 ,常压固定床反应工艺研究。考察了反应温度、进料空速、原料配比对反应结果的影响。优化条件下 ,间甲苯胺的转化率为 96 %以上 ,N 乙基间甲苯胺的选择性为 93%以上     

Fischer–Tropsch synthesis over Co–SiO2 catalysts prepared by the sol–gel method

Fischer–Tropsch synthesis was carried out in slurry phase over uniformly dispersed Co–SiO₂ catalysts prepared by the sol–gel method. When 0.01–1 wt.% of noble metals were added to the Co–SiO₂ catalysts, a high and stable catalytic activity was obtained over 60 h of the reaction at 503 K and 1 MPa. The addition of noble metals increased the reducibility of surface Co on the catalysts, without changing the particle size of Co metal significantly. High dispersion of metallic Co species stabilized on SiO₂ was responsible for stable activity. The uniform pore size of the catalysts was enlarged by varying the preparation conditions and by adding organic compounds such as N,N-dimethylformamide and formamide. Increased pore size resulted in decrease in CO conversion and selectivity for CO₂, a byproduct, and an increase in the olefin/paraffin ratio of the products. By modifying the surface of wide pore silica with Co–SiO₂ prepared by the sol–gel method, a bimodal pore structured catalyst was prepared. The bimodal catalyst showed high catalytic performance with reducing the amount of the expensive sol–gel Co–SiO₂.     

Selective oxidation of styrenes under oxygen catalyzed by cobalt chloride

The cobalt(II) chloride-catalyzed oxidative cleavage of -methylstyrene with oxygen in t-BuOH gives acetophenone and formaldehyde in good yield. The competing reactions between C=C cleavage and formation of polymeric products are strongly affected by the solvent, cobalt catalyst and concentration used, as well as the reaction temperature. A free radical mechanism involving a cyclic peroxide intermediate is proposed to give the cleavage products. Oxidation of various alkenes using CoCl₂/t-BuOH/O₂ system shows that only activated styrenes can be oxidized effectively. The reactivity of various styrenes and their selectivity towards giving cleavage products or polymers are strongly influenced by the electronic and steric properties of the substrate.     

Investigation of bio-ethanol steam reforming over cobalt-based catalysts

The catalytic performance of cobalt catalysts supported on γ-Al₂O₃, TiO₂, ZrO₂ were studied for bio-ethanol steam reforming (BESR) reaction. The supported catalysts (10 wt%Co) were prepared by impregnation and characterized through Thermogravimetric analysis (TGA), H₂ chemisorption, laser Raman Spectroscopy, Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), and temperature-programmed reaction (TPRxn). The metallic cobalt sites were found to correlate with the BESR reaction activity. The reaction and H₂ chemisorption showed that ZrO₂ supported catalyst showed the best dispersion and best catalytic activity. Over the 10% Co/ZrO₂ catalyst, using a H₂O:EtOH:inert molar ratio of 10:1:75 and a GHSV = 5000 h⁻¹, 100% ethanol conversion and a yield of 5.5 mol H₂/mol EtOH were obtained at 550 °C and atmospheric pressure.     

超声辐照制备SrFeO3降解苯酚光催化性能研究

采用超声辐照柠檬酸络合法制备了复合氧化物SrFeO3，以苯酚为光催化探针分子，以450W高压汞灯为光源（主波长〉410nm），研究了SrFeO3光催化性能、研究表明，经过超声辐照制备的SrFeO3光催化活性提高一倍以上。XRD、TEM、DRS表征结果表明，超声辐照制备的SrFeO3粒径均匀、分散性好、粒径较小，光吸收红移显著。探讨了超声提高催化性能的机理。