��Ȼ����Һ���÷����̽

求文针对我国天然气凝液如何利用问题,结合新技术进展,进行了初步探讨,认为原料较多的场合,应以催化脱氢或芳构化作为当前的主要加工方向。对原料较少的场合,也提出一些看法。     

适用于稠油开采的游梁式抽油机设计分析

在稠油开采中,抽油杆在液体中运动时,所受到的摩擦阻尼力很大,有时高达几十千牛。上冲程时,该力有加大悬点载荷的作用;下冲程时,该力使抽油杆下行困难,甚至悬点载荷为零。为了开采稠油,必须根据其特点设计适应的游梁式抽油机。文章分析了稠油用抽油机的受力特点,提出了该类抽油机的设计要求。     

Determination of gas dispersion in vapor extraction of heavy oil and bitumen

In this work, a mathematical model is developed and simulated to determine gas dispersion along with solubility during the vapor extraction (Vapex) of live oil from a laboratory scale physical model. The physical model is a rectangular block of homogenous porous medium saturated with heavy oil and bitumen. At a given temperature and pressure, the block is initially exposed on its side to a solvent gas, which diffuses into the medium and gets absorbed. The absorption of gas reduces the viscosity of heavy oil and bitumen causing it to drain under gravity. The low-viscosity “live oil” is produced at the bottom of the porous block. The production of live oil with time is accompanied by the shrinkage of oil in the block as well as its increased exposure to gas from top. These phenomena of Vapex are described by the mathematical model, which is used to calculate live oil production with various values of gas solubility and dispersion. Their optimal values are determined for the vapor extraction of Cold Lake bitumen with butane by matching calculated live oil production with its experimental values published earlier.     

中原高温高盐油藏疏水缔合聚合物凝胶调剖剂研究

针对中原油田高温(>80℃)、高盐度(>50 g/L)、高硬度(>1 g/L)砂岩油藏,研制了地下成胶的高热稳定性聚合物凝胶调剖剂。所用聚合物为疏水缔合聚合物AP-P4,M=9.0×106,HD=27%,疏水基摩尔分数0.2%;交联剂为可生成酚醛树脂的3种化合物;调剖剂胶液用矿化度160 g/L的马寨油田污水配制;实验温度95℃。根据形成的凝胶黏度(95℃,1.1 s-1)确定交联剂各组分用量为:MZ-YL 0.429%,MZ-BE 0.060%,MZ-XS 0.012%;酸度调整剂用量0.12%;成胶时间10~15小时。2.5、3.0、3.5 g/L AP-P4的凝胶在95℃老化100天后黏度保持在~40 Pa.s及以上。初配制胶液在3000 r/min下剪切15分钟后黏度降低87.5%~89.0%,但成胶后和老化过程中凝胶黏度只比未剪切样降低17.1%~6.6%。3.5 g/L AP-P4的调剖剂对~1μm2的6支储层岩心的堵塞率在88.1%~95.8%范围,平均93.3%,造成的残余阻力系数在15.2~28.6范围,平均19.8,使渗透率级差2.3~8.0的4组双人造岩心的注水流量比发生不同程度的反转。认为该凝胶调剖剂高温下稳定性好的原因,是强化学交联密度低,因而凝胶脱水收缩作用弱。图2表5参5。     

悬浮床加氢裂化油溶性催化剂与沥青质的作用

在高压釜反应器中对添加了油溶性 Ni 催化剂(UPC-O)和水溶性 Ni 催化剂(UPC-W)的辽河稠油常压渣油(LHAR)进行了悬浮床加氢裂化实验。通过元素分析和傅里叶变换红外光谱(FTIR)分析对抑制反应生焦效果好的 UPC-O 与 LHAR 沥青质的作用进行了研究。元素分析结果显示,在 LHAR 中加入 UPC-O1000μg/g,沥青质和脱沥青质油中 Ni 含量分别出476μg/g和110μg/g 增加到7 559μg/g 和1 024μg/g,表明 UPC-O 在沥青质中有富集的趋势。FTIR 表征结果显示,UPC-O 和沥青质发生了相互作用。UPC-O 可在沥青质原位硫化为活性组分,对沥青质在悬浮床加氢裂化反应中的缩合起到好的抑制作用。     

油基钻井液的推广及循环利用

针对普通水基钻井液在钻进中强、强水敏性油藏时会造成储层污染、产量降低的问题,指出了油基钻井液在钻进该类油藏时的优势和其成本高、对生态环境有污染的缺点。为了大面积推广应用油基钻井液,重点介绍了油基钻井液的特性和稳定性影响因素,并通过室内评价证明了油基钻井液在油层保护中的良好效果,着重阐述了油基钻井液在王庄油田的现场应用情况,并探讨了油基钻井液的循环利用技术。研究结果表明,油基钻井液不仅具有良好的油层保护效果,而且具有较好的社会经济效益。     

Effects of Process Conditions on Desalting and Demetalization of Crude Oil

The efficiency of desalting for six crude oils was studied with a SY-1 dynamic simulation experimental installation. The demulsifier DC2 was examined for 1#, 2#, and 4# crude oil and DC4 was used for 3#, 5#, and 6# crude oil. The effects of temperature, electric field gradient, dosage of demulsifier, and washing water on the desalting efficiency of six crude oils were investigated. The results showed that at the optimization process condition after desalting, the desalting efficiency and the salt content of 1# crude oil reached 89.17% and 1.92 mg/L; that of 2# crude oil reached 85.08% and 1.04 mg/L; that of 3# crude oil reached 91.06% and 1.35 mg/L; that of 4# crude oil reached 81.67% and 1.51 mg/L; that of 5# crude oil reached 81.03% and 2.32 mg/L; and that of 6# crude oil reached 86.64% and 2.67 mg/L. Different crude oils have different metal contents. Three assistants, ammonium nitrate (TJ1), nitric acid (TJ3), and polyamine carboxylate (TJ4), were used to improve the efficiencies of desalting and demetalization of six crude oils. TJ4 was more efficient in removing calcium and iron for 1# and 2# crude oil. TJ1 was more efficient in desalting and demetalizing 5# crude oil. The efficiencies for removal of calcium, iron, nickel, and vanadium respectively reached 99.89%, 98.33%, 20.58%, and 43.02%. TJ3 has better efficiency desalting and demetalizing for 6# crude oil. With the concentration of TJ3 increasing from 0 to 80 mg/L, the desalting efficiency increases from 31.22% to 73.54%, and the iron removal efficiency increases from 56.0% to 74.05%.     

中石油成品油营销之差距与对策

与国外大石油公司相比,当前中石油在成品油终端销售方面还存在一些差距,比如管理较落后,流通费用较高,员工素质偏低,技术手段还不够先进,品牌影响力还不够强等等。要提高中石油在成品油市场上的地位,还需要从企业竞争能力、价值链优化整合、市场定位、营销策略等方面进行不断的探索与努力。     

φ140mm套管拔套侧钻工艺技术在濮城油田的应用

濮城油田开发后期,因事故导致损坏的井数不断增多,不仅损失了相当一部分储量,而且严重威胁着油田的发展。针对这一问题,应用拔套侧钻工艺技术对有潜能的事故井进行侧钻更新,投产后取得了良好的效果,成为油田增储上产和挖潜剩余油的重要手段,同时也为解决困扰油田发展的难题找到了好的方法。     

Electrostatic destabilization of water-in-crude oil emulsions: Application to a real case and evaluation of the Aibel VIEC technology

In the current study, the Aibel Vessel Internal Electrostatic Coalescer (VIEC) technology was tested for a real case scenario encountered in the production train of a UK oil field. Depressurized samples were collected both upstream and downstream of the first stage separator. The separation performance was discussed with respect to water cut and droplet size distribution of the emulsions, and the effect of chemical treatment. Issues with respect to representative sampling and testing have been discussed. The application of an external AC electrical field has been shown to significantly enhance the separation of the aqueous phase from tight emulsions, both when it was used alone and in combination with a commercial demulsifier. By using the VIEC technology, the time for separation could be reduced from 8 min to 2 min and the overall BS&W in the emulsions was improved from 45% or 60% to a residual water content of 5-20%. Destabilization of a 45% water-in-oil emulsion by electrical and chemical treatment (20/40 ppm) produced oil in the 2-7% BS&W range whereas the corresponding tests without applying an electrostatic field led to a BS&W greater than 25%. The achieved results strongly suggest that the VIEC technology can resolve the stable emulsion bands encountered in the Schiehallion train and add flexibility or increased production rate to the process. The results also suggest the importance of further studies on the destabilization performances achieved by electrostatic means.