Extended Hyperbolic Model for Sand-to-Concrete Interfaces

A relatively simple, four-parameter extended hyperbolic model for interfaces was developed for use in soil-structure interaction analyses. The model accommodates arbitrary stress path directions and includes three important elements: (1) development of a yield surface during interface shear; (2) a formulation for yield-inducing shear stiffness that is applicable to any stress path orientation; and (3) a formulation for unloading-reloading shear stiffness. The model was evaluated against the results of shear tests performed at the interface between three different types of sand and a concrete surface under a variety of stress paths. Comparisons between measured and calculated interface response indicate that the model provides accurate estimates of the response of sand-to-concrete interfaces.     

Monotonic and cyclic oedometer tests on sand at high stress levels

In this paper, one-dimensional compression behavior of uniformly graded fine sand is studied with the use of oedometer test at elevated stress levels. To reach the elevated stress levels, testing is performed in a strain controlled manner. In addition, standard stress controlled testing method is also used at lower stress levels for the purpose of comparison. Specimens prepared with initial relative densities ranging from loose to dense are subjected to normal loading as well as hysteretic and repeated loading patterns. Results showed that there is a linear relationship between compressibility index and relative density. The magnitude of compression is mainly influenced by inundation where the compressibility behavior is found to be depending on the initial formation density. Regardless of the initial formation density, convergence to a similar compression index is observed with the hysteretically loaded samples whereas a continuous modification was obtained with repetitively loaded reformed specimens.     

某厂锆（Zr）生产流程中不同产物的天然放射性核素含量测定

本文报道了某厂锆(Zr)生产流程中原料(锆英砂,主要成份为 ZrSiO_4)、半成品(ZrC,ZrCl_4)、废渣和成品锆中天然放射性核素~(238)U、~(226)Ra、~(232)Th 和~(40)K 含量测定结果。采用 NaI(Tl)γ能谱法进行测定,结果表明,原料、半成品和废渣中都含有一定的放射性,各生产环节应采取适当的防护措施;成品锆中基本不含放射性,可安全地应用于各个生产和生活领域。     

以磷酸为粘结剂的高铝钒土砂的研制与应用

介绍了以磷酸为粘结剂的高铝钒土砂的组成和性能及在离心铸造端盖造型上的使用方法和使用效果。实践证明，它具有很好的经济效益和社会效益。     

浅谈原油顺序输送过程中混油量的计算

针对原油顺序输送工艺的特点,分析了原油顺序输送产生混油量的原因,给出了混油量计算公式。指出混油的形成与输送距离、油品种类、输量、停输时间、地形等有关。举例对东黄复线顺序输送所产生的混油量进行分析计算,给出了顺序输送过程中减少混油量的措施。     

DH-1型型砂水分自动测控系统

介绍了一种新型的型砂水分测控系统。它以单片机为主控机，采用自行 研制的电容式集成水分传感器对型砂水分进行测控。该系统应用先进的数据采集和自动控制技术，具有控制精度高、运行可靠、安装操作方便等特点，实际应用试验表明本系统较好地符合生产实际要求。     

树脂砂型离心铸管表面粘砂缺陷的研究

研究了树脂砂型离心铸管表面质量及影响因素。结果表明，覆膜砂粒反和砂层厚反对铸件表面质量有显著影响。砂的粒度细时不易粘砂且铸件表面粗糙度高，而砂层厚度越薄表面质量越差，故至少需４ｍｍ厚的砂层。砂中加氧化铁粉时对防止粘砂不起作用，但砂层表面涂刷涂料时防止粘砂效果非常明显。     

消失模铸造在轧臼壁生产中的应用

介绍了用消失模铸造生产圆锥破碎机轧臼壁的工艺过程,实践证明,用消失模工艺生产的轧臼壁具有工期短、成本低、成品率高、铸件表面质量高等特点.     

铜塔铸造工艺

介绍了五台山铜塔铸造工艺,由于其结构特殊,故采用了3种工艺分别铸造而成:细砂湿模造型、树脂砂毁模贴皮造型和熔模铸造.介绍了铜塔表面化学着色技术.铜塔铸造工艺对其他相似艺术铸品具有一定的借鉴价值.     

水玻璃砂的再生

介绍了水玻璃旧砂湿法、干法和热法的再生原理,并简要说明了其应用情况.通过阐述人们对水玻璃硬化机理的认识,说明了水玻璃旧砂化学再生的基本原理,并对近年来水玻璃旧砂化学再生方面的研究及应用情况进行了总结概括.