乳液聚合中乳化剂对聚合物乳液稳定性的影响

简要叙述了聚合物乳液稳定性的测定方法，详细地讨论了乳化剂的类型、用量及加入方式等对丙烯酸酯类聚合物乳液的化学稳定性、机械稳定性及贮存稳定性的影响。     

Comparison of RAFT polymerization of methyl methacrylate in conventional emulsion and miniemulsion systems

In this study, we have conducted the reversible addition-fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) in two heterogeneous systems, i.e. conventional emulsion and miniemulsion, with identical reaction conditions. The main objective is to compare the living character in both systems according to the nucleation mechanism, the latex stability, the particle sizes and particle size distributions of latexes, the molecular weights and molecular weight distributions (or polydispersity index, PDI) of PMMA, and the kinetics of the RAFT polymerization. The RAFT agent used in both systems was 2-cyanoprop-2-yl dithiobenzoate (CPDB). The effects of an oil-soluble initiator 2,2′-azobisisobutyronitrile (AIBN) and a water-soluble initiator kalium persulfate (KPS) on the RAFT/emulsion and RAFT/miniemulsion polymerizations were investigated. Methyl-β-cyclodextrin (Me-β-CD) was used as a solubilizer. The average molecular weights and molecular weight distributions (PDIs) of dried PMMA samples were characterized by gel permeation chromatography (GPC). The experimental results showed that the RAFT/miniemulsion polymerization of MMA exhibited better living character than that of RAFT/emulsion polymerization under the conditions of our experiment. The PDI of PMMA in RAFT/miniemulsion polymerization was decreased with the addition of Me-β-CD. However, Me-β-CD did not have influence on the PDI of PMMA prepared in RAFT/emulsion polymerization.     

芯壳乳液胶粘剂的研究

介绍乙酸乙烯酯－丙烯酸丁酯－丙烯酸芯结构乳液的制备方法，并将它们的性能与均匀共聚乳液作了测试与比较。     

EBR胶乳凝胶的控制及其对ABS树脂冲击性能的影响

主要讨论了摩尔质量调节剂，延长后期反应时间，提高后期反应温度，过硫酸钾用量等对乙烯－丁二烯橡胶（EBR）胶乳凝胶的影响；同时讨论了低凝胶条件和高凝胶条件下凝胶对ABS树脂性能的影响。结果表明：低凝胶条件,ABS树脂的冲击性能随凝胶质量分数的增加而增加；高凝胶条件下，则随凝胶质量分的增加而降低，得到了EBR胶乳生产中凝胶的主要控制方法，并通过控制EBR胶乳凝胶来实现对ABS树脂冲击性能的控制。     

EVA共聚物的性能与应用

EVA共聚物广泛用作电线电缆中的热收缩材料,半导电屏蔽材料和阻燃绝缘材料,本文简要综述EVA共聚物的基本性能。     

乳液聚合导致一种新的转相过程

借助电导率仪、光学显微镜和亚微粒子分析仪等测试手段。研究了乳液聚合导致一种新的转相过程,并用于八甲基环四硅氧烷的聚合中。研究表明:体系以 W/O 相态开始,单体由连续相向水相(分散相)内的胶束中扩散并发生聚合反应,形成 O/W/O 复合乳液。反应过程中连续相体积不断减小,分散相(O/W 复相)体积不断增大,当达到某一临界相比时,体系发生转相,转相后乳液为 O/W。对本实验物系,转相点临界相比主要由初始水油比和乳化剂浓度决定。同常规的乳液聚合相比,伴有转相现象的乳液聚合有其自身的特点,转相使得聚合速率、聚合物粒径及分布、乳液稳定性等发生变化。     

Aqueous heterophase polymerization of styrene—a study by means of multi-angle laser light scattering

An online multi-angle laser light scattering study of ab initio surfactant-free styrene emulsion polymerization reveals unexpected results regarding the development of the dispersity during the whole reaction starting from mixing styrene and water at reaction temperature. The experimentally observed change in the dispersity, which is an indirect measure of the average characteristic size of the colloidal objects, allows the identification of three characteristic intervals. During interval A the equilibration of styrene in water is characterized by the formation of styrene domains, which increase in number and size until an equilibrium state is reached. This means that there is virtually no homogeneous/molecular styrene in water solution but rather nanodroplets of about 200 nm in diameter (assuming spherical shape) are formed. During interval B, after initiation of the polymerization and particle formation, the dispersity increases again as the average size decreases and the number of scattering objects increases. The polymer particles suck up the monomer from the monomer nanodroplets, which leads to the disappearance of the nanodroplets and to a decrease in the average size. During interval C the average size increases again due to the predominantly growth of the polystyrene particles.     

马来酸酐接枝聚丙烯增容聚丙烯/碳酸钙复合物力学性能与增容机理

用在50L固相接枝反应器中合成的马来酸酐接枝聚丙烯(PP-g-MAH)作界面改性剂，制备了马来酸酐接枝聚丙烯／聚丙烯／碳酸钙(i-PP／PP-g-MAH／CaCO3)复合材料。研究了i-PP／PP-g-MAH／CaCO3复合材料的力学性能和增容机理。结果表明，PP-g-MAH对i-PP／CaCO3复合物的缺口冲击强度、弯曲强度和拉伸强度均有提高；PP-g-MAH与CaCO3反应形成PP-g-MAH的钙盐，实现反应性增容。     

反应型共聚物相容剂在聚合物合金中的应用

反应型共聚物相容剂所含的反应官能团与共混物中聚合物的相关的官能团发生化学反应，从而改善不相容聚合物共混物的相容性。本文介绍了反应型共聚物相容剂的分子设计，合成及其应用。     

Investigation into the effect of carboxylic acid monomer on particle nucleation and growth in emulsifier-free emulsion copolymerization of styrene-butadiene-acrylic acid

Latexes of carboxylated styrene-butadiene rubber were prepared via batch emulsion copolymerization with different amounts of acrylic acid in the absence of emulsifier. The effect of acid monomer was investigated in the particle formation and growth. It was observed that the amount of acrylic acid strongly affected the particle formation. The number of particles and thus polymerization rate increased with increasing of the acid content. There was no significant difference in the polymerization rate per particle in all experiments. The results show that in this case particle growth process is less dependent on the acrylic acid amount in comparison with its influence on nucleation stage and then particle number. Several parameters such as polymerization rate and number of latex particle per unit volume of the aqueous phase were calculated. Attempt was made to evaluate the average number of growing chain per particle. Also average particle diameter of the above carboxylated SBR latexes was obtained through some calculations from the direct measurement of average particle diameter in the swollen state by light scattering technique for the first time.