对我厂防治加热管内碳酸钙垢的思索

分析了我厂两碱法原卤净化后,加热管内壁结碳酸钙垢的原因,探讨了我厂采取加盐酸、加阻垢剂、用超声波阻垢器的方法,以及对加热管内碳酸钙垢防治的情况和存在的问题.     

Red Wine Polyphenols for Cancer Prevention

Conventional cancer therapies, the second leading cause of death worldwide, result in serious side effects and, at best, merely extend the patient''s lifespan by a few years. Searching for effective prevention is of high priority in both basic and clinical sciences. In recent decades natural products have been considered to be an important source of cancer chemopreventive agents. Red wine polyphenols, which consisted of various powerful antioxidants such as flavonoids and stilbenes, have been implicated in cancer prevention and that promote human health without recognizable side effects. Since resveratrol, a major component of red wine polyphenols, has been studied and reviewed extensively for its chemopreventive activity to interfere with the multi-stage carcinogenesis, this review focuses on recent progress in studies on cancer chemopreventive activities of red wine polyphenol extracts and fractions as well as other red wine polyphenols, like procyanidin B5 analogues and myricetin.     

防霉建筑涂料的研究与施工使用

针对国内外防霉建筑涂料存在的问题，研制开发了以合成树脂为主要成膜物质，加入环保性杀菌防霉剂及具有防腐霉的功能性颜填料，再配以树脂固化剂等成分配制而成的高性能防霉建筑涂料，并指出该涂料防霉效果良好。     

A SVET investigation on the modification of zinc dust reactivity

Weldable primers are thin zinc-rich organic coatings that are weldable due to the electrical conductivity provided by the zinc dust. They are used in the automotive industry to provide corrosion protection in regions of difficult access. The zinc particles are highly susceptible to corrosion attack and, due to the small thickness, the protection conferred by these systems is limited.     

Optimisation of metallic pigments in coatings by an electrochemical technique and an investigation of manganese powder as pigment for metal rich primers

Zinc dust and manganese powder as pigments were incorporated in epoxy-polyamide and butyl titanate medium, with different pigment volume concentration (PVC) ranging from 20 to 74. These protective coatings were coated on sand blasted mild steel substrates and immersed in 3 wt.% sodium chloride solution and the corrosion current was measured by the Tafel extrapolation method. From the corrosion current produced by these primers, the optimum level of the pigments in these binders was identified. Thus the protective performance of optimised primers was evaluated on a sand blasted mild steel surface by the Tafel polarisation method in 3 wt.% sodium chloride solution, over different periods of time. The results were found to be comparable with the salt spray test and galvanic current measurements. The manganese powder used for this investigation showed that it could be used as an alternative to zinc powder for metal rich primers.     

超高强度钢CF裂纹扩展的超载效应 Ⅰ．定量模型及预测

将Ｗｉｌｌｅｎｂｏｒｇ的超载残余应力场模型与裂尖形变动力学、裂尖表面析氢反应电化学动力学以及裂尖材料内部氢的扩散动力学和热力学相结合，建立了氢脆腐蚀疲劳裂纹扩展（ＣＦＣＧ）超载效应的定量描述模型，给出了超载对裂尖表面析氢电化学反应及裂尖氢扩展影响的一系列判据和表达式．用上述模型进行的预测表明，对于超高强度钢，当两次超载周次之间裂纹扩展长度ａｄ远小于超载塑性区尺寸ｒｐＯＬ与恒载塑性区尺寸ｒｐＣＬＡ之差，即ａｄ＜＜ｒｐＯＬ－ｒｐＣＬＡ时，ＣＦＣＧ会发生比空气疲劳还强烈的超载迟滞效应．而当ａｄ＞ｒｐＯＬ－ｒｐＣＬＡ时，可能会发生超载加速效应．这种预测在后文中由试验的宏观规律与断口特征得到充分验证．     

Electrochemical noise analysis for estimation of corrosion rate of carbon steel in bicarbonate solution

We have investigated the electrochemical noise behavior of carbon steel in fully deaerated aqueous bicarbonate solutions, and discussed the optimum conditions of the noise analysis for estimating corrosion rate of the steel. Noise of the potential difference and of the short-circuit current between two identical steel coupons were successfully measured. The time-series noise patterns were transformed into frequency domain by fast Fourier transformation, and then their power spectrum densities (PSDs) at a frequency were determined to be compared with the corrosion rate. The PSDs of the potential and of the current varied with changing environmental factors of bicarbonate concentration, pH, and immersion time. The factors also controlled the corrosion rate of the steel. The PSDs were associated with the corrosion rate, and then it was found that the PSDs of the potential and of the current showed linear correlation with the corrosion rate in log-log scale. There was also linear relationship between the corrosion rate and a spectral noise resistance obtained from the PSDs of the potential and the current. The linearities of the three correlations were better at a lower analyzed frequency. Furthermore, the PSDs of the current and the noise resistance indicated more linear correlation with the corrosion rate than that of the potential. As the simplicity of the measurement system is additionally considered, it is concluded that the PSD of the current noise at an analyzed frequency of 3 mHz is the optimum conditions for estimating the corrosion rate from 10⁻² to 10⁰ A m⁻² in this study.     

Ethoxylated fatty alcohols as corrosion inhibitors for dissolution of zinc in hydrochloric acid

The effect of some ethoxylated fatty alcohols, with different numbers of ethylene oxide units, on the corrosion of zinc in 0.5 M HCl has been studied using weight loss and polarization measurements. The inhibition efficiency was found to increase with increasing concentration, number of ethylene oxide units per molecule and with decreasing the temperature. Inhibition was explained on the basis of adsorption of ethoxylated fatty alcohols molecules on the metal surface through their ethoxy groups. The degree of surface coverage varied linearly with logarithm of inhibitor concentration fitting Temkin isotherm. The thermodynamic parameters were calculated for the tested system from the data obtained at different temperatures.     

S—135钢板热轧工艺研究

S—135钢板是水电站用高强耐磨不锈钢板,既要求强度高、韧性好,又要求耐磨、耐蚀性强,生产难度较大。除我厂外,目前国内尚无其它厂家能够生产这种钢板。该钢板在加热轧制,冷却过程中要解决很多技术难点。我们通过采用特殊的控制轧制和控制冷却工艺,很好地解决了诸多技术难点,使S—135钢板的开发研制取得了成功。为电站用高强度耐磨不锈钢生产提供了宝贵的经验,也为控制轧制及控制冷却技术在中板生产行业的应用起到了积极的推动作用。     

THE EFFECT OF CATHODIC PROTECTION POTENTIAL ON CORROSION FATIGUE CRACK GROWTH RATE OF AN OFFSHORE STRUCTURAL STEEL

Abstract— Duplicate tests have been performed to determine the effect of cathodic protection potential on corrosion fatigue crack growth rate of a modern offshore structural steel, produced by thermo-mechanically controlled processes. The experiments were carried out using compact tension specimens exposed to artificial seawater at 10°C and subjected to constant amplitude loading at 0.35 Hz. Reproducible results showed that the merits of cathodic protection potentials are strongly dependent on stress intensity ratio R and stress intensity range Δ K . It appears that a specific value of cathodic potential may not give comprehensive protection against corrosion fatigue within the spectrum of variable amplitude loading experienced in service. Fractography showed the initiation of secondary cracks on the fracture surface to be associated with the dissolution of calcium sulphide inclusions, regardless of imposed cathodic potential.