Rheology in Processing of in Situ Composites of Polypropylene and Low Melting Poing Metals

The low melting point metallic tin powder or alloy of tin and lead was blended with polypropy-lene. A kind of in situ composite has been prepared. The variations of torque were studied when the composites were mixed in Haake torque rheogeniometer. By way of capillary extrusion, effects upon rheology of the in situ com-posites of the low melting point metals (LMPM) and coupling agent for their different variety and content, were investigated. From flow curves, the results indicate that in situ composites mixed with the LMPM are a kind of pseudoplastic fluid. If the LMPM were melted, the higher the content of the LMPM , the lower apparent viscosity of composites. Meanwhile, when the coupling agent is added into composites, the viscosity of composite will go up first and drop then. This shows that the LMPM have a promoter flow action on the polypropylene.     

机采井最高经济效益合理流压的研究

本文从举升流体的投入费用与产出原油收益的对比中提出了机采井最高经济效益合理流压的概念，推导出此种定义下合理流压的计算公式。     

仲胺衍生物柴油流动改进剂

考察了十八种胺衍生物改善高含蜡柴油低温流动性的作用规律。结果表明，仲胺衍生物主要是通过增溶柴油中的长链正构烷烃，使浊点、冷滤点降低，从而改善柴油低温性能。仲胺衍生物与T1804流动改进剂（乙烯-醋酸乙烯酯聚合物）复合可以改善蜡晶的分散性能，对降低柴油冷滤点有增效作用。     

高聚物共混物及嵌段共聚物熔体的流变性（Ⅰ）共混物熔体的流动特性

综述了高聚物二元共混物及嵌段共聚物熔体的静态流变性，分析了不同共混体系的流动曲线，总结了共混物的流动特性及规律     

预测气体-幂律液体水平段塞流的持液率

对水平管中气体－非牛顿幕律液体两相流动的持液率进行了研究，给出的段塞流持液率计算式与实验结果吻合较好。     

连铸结晶器中钢液流速解析

连铸结晶器中钢液的速度分布对结晶器的传热和夹杂物的分布有较大影响。采用射流理论．得出结晶器内钢液流动的四个不同区域，分别求得其钢液流动的物理模型。模型与实验结果有很好地一致性。     

空分设备基础知识讲座 第六讲 向心透平膨胀机(五)

本讲介绍透平膨胀机的各种损失、效率与i－s图上的膨胀过程,以及特性曲线。图3。