微波宽频带功率负载的研究

介绍了５００Ｗ宽频带功率负载的设计及实验结果，并将研究成果扩展到１０～１０００Ｗ范围。负载主要技术指标：输入阻抗５０Ω，频带宽度０～１０００ＭＨｚ，电压驻波比≤１．１．表面最高温升△ｔ≤１００℃。     

Theoretical Analysis of Critical period in Microbend Fiberoptic Sensor

1IntrodctionThesdV8fltsg6Sofffi1CY0bCfldf山CY0ptlCS6fiS0f8f6lflt6llSltyffiDdU18tlflgsliddCtCCtlflg，simpletechnique，highrellabllltyandlowprice，thereformlcrobendfiberoptlcsensorIswidelyusedtomeasurementofstrain，stressandv比rationetc．Inpractice，thesensltlvltyofsensorIsaveryimportantparameter，andthesensltlvltyofmlcrobendf山eroptlcsensorIsmainlyrelat-6dtofoil0WlflgthY66f8CtofS［‘-：ffilCfob6fldsffiplltlld6：fillffib6yofthlCY0b6fldS6Ct10llSsfldffil-crobendperiod，andmlcrobendperio…     

盘锦地区电力负荷的季节性分析

本文从盘锦地区１９８７－１９９３年电力负荷的原始资料入手，运用移动平均并加以改良的方法，从具有季节性变化的电力负荷系列中，分离出季节性分量，提示了电力负荷发展变化的规律。文中分析了盘锦地区七年间电力负荷发展的自身特点，指出其循环变化的转折点，给出了未来近期负荷变化的趋势，为电力行业制定规划和组织生产提供了依据，对供电企业合理安排生产计划、适应市场经济带来启示。     

定向爆破拆除煤矿主井井塔

文章论述了井塔拆除爆破中，把框架承重立柱的裸露钢筋骨架失稳看作为压杆失稳以及井塔在倾斜撞地时下部不解体破坏的估算。     

MPP中确定临界处理器数的方法

本文提出了并行求解问题时所应征用ＭＰＰ系统中临界处理器数的选择方法，该方法根据问题图中每一结点的时间特征进行选择，可操作性好，易于实现，特别适用于基于互连网络的ＭＰＰ系统和分布式系统。     

On the hollowness ratio effect on the dynamics of a spinning Rayleigh beam

The analytical solutions of a spinning Rayleigh beam with rotatory moment inertia and gyroscopic effect are presented in this paper. The critical speeds can be written analytically in a function of the length-to-radius ratio (l) defined by the beam's length over its outer radius and the hollowness ratio (α) defined by the hollow area over the total area of the cross section. The sensitivity analyses show that the critical speed is decreasing with l, but increasing with α. Moreover, α is more sensitive to the critical speeds. The design of a spinning beam should therefore be emphasized more on the hollowness factor. Contrary to common belief, only finite critical speeds exist and the number is independent of the boundary conditions. It increases monotonically with l, but decreases with α. The steady state unbalanced response can therefore be expressed analytically by the finite precessional modes and the corresponding generalized coordinates.     

Maintenance strategy based on a multicriterion classification of equipments

In an industrial plant, the level of maintenance provided to individual equipment is directly related to the availability that is expected from it. Thus, it is hoped that the most critical equipments will not fail or, at least, that any failure will be rapidly detected and corrected in the minimum time possible. Since resources are limited, it is necessary to determine how they should be distributed, so that no important equipment remains neglected while more resources are concentrated on the most critical items. Therefore, it is necessary to classify equipment in an objective way according to its importance. The method of multicriterion classification of critical equipments (MCCE)², which is described in the present work, allows systematic and detailed quantification of the criticality of all equipment, that is to say, it provides an evaluation of the importance that its correct operation has for the plant. To provide this information, the consequences for a company of any failure in the equipment concerned are analysed. Finally, a real case example of an urban wastewater treatment plant is described, in which the MCCE method is applied.     

配网侧接入电源对负荷建模的影响

研究了配网侧接入电源对负荷建模的影响。发现当配网侧电源的发电容量逐渐增大时，原有的感应电动机并联恒阻抗、恒电流、恒功率（ZIP）模型的负荷模型将不再能很好地反映该区域的负荷特性，进而提出了一种新的负荷模型结构———异步发电机并联ZIP模型。通过仿真计算，验证了该新负荷模型的有效性，并进一步统一了上述2种负荷模型，称为异步机并联ZIP负荷模型。     

上海市用电负荷管理系统主站异地冗灾备份方案研究

对上海市用电负荷管理系统主站灾备系统的建设进行可行性研究,根据系统现有结构,结合主流技术提出建议性的方案.重点对各种设备技术进行分析,包括涉及计算机、网络、软件等各方面的设备技术,提出建设原则及实施建议.     

垫层载荷试验应注意的几个问题

介绍了垫层上载荷试验的类型，通过工程实例对不同类型垫层上的载荷试验应注意的问题进行了分析和探讨，这对通过载荷试验确定双层地基承载力具有一定的实际意义，可供同类工程参考借鉴。