集中载荷作用下的套管抗挤能力分析

根据油田套管损坏情况,建立了集中载荷作用下的套管抗挤能力计算模型,利用能量法和曲杆理论,分析研究了承受180°对称分布集中载荷、90°均匀分布集中载荷和120°均匀分布集中载荷下中厚壁套管抗挤能力,得出了理想圆管抗挤强度和套管屈曲临界挤毁压力的计算公式,通过分析比较理论解与有限元解,其最大相对误差不超过1%,得出了套管抵抗局部载荷的能力低于抵抗均布载荷的结论。     

用NAT技术实现负载均衡的实践

通过对路由器NAT功能配置实践,提出了使用反向NAT技术实现互联网访问负载均衡技术的一种解决方案.     

两种含水炸药动压下减敏作用的实验研究

用实验方法对两种含水炸药—水胶炸药和珍珠岩敏化的乳化炸药动压下的减敏作用进行了研究。为了更全面深入地研究这问题,提出了临界压死距离和临界距离两个概念。研究表明,含水炸药的减敏作用与药包间距和延期时差关系很大。水胶炸药的临界压死距离大于乳化炸药,而它们的临界距离相当,这表明两种炸药发生减敏的难易程度相近,但是乳化炸药的抗压死能力比水胶炸药大。采用5段延期电雷管引爆时两种含水炸药的减敏作用比采用2段延期电雷管引爆严重些。     

智能化空调设计负荷计算软件的开发

为了解决目前已有空调负荷计算软件使用效率低，不符合设计人员思维习惯的弊病，本文将基于神经网络的专家系统技术与空调负荷“指标估算法”结合起来，开发了一套智能化空调负荷计算软件，对空调设计负荷计算的智能化进行了有益的尝试。该软件计算结果准确，特别适合于经验不足的设计人员使用。     

A hemispheric division of labor aids mental rotation.

In the present study, we investigated whether a hemispheric division of labor is most advantageous to performance when lateralized inputs place unequal resource demands on the left and right cerebral hemispheres. In each trial, participants decided whether 2 rotated letters, presented either in the same visual field (within-field trials) or in opposite visual fields (across-field trials), were both of normal orientation, or whether one was normal and the other was mirror-reversed. To discriminate a letter's orientation, one must rotate the letter to the upright position. Therefore, we manipulated whether the two letters imposed similar or dissimilar demands on cognitive resources by varying the number of degrees that each letter needed to be rotated to reach the upright position. As predicted, in 2 experiments we found that the across-field advantage increased as the number of degrees each letter needed to be rotated became more dissimilar. These findings support a current model of hemispheric interactions, which posits that an unequal hemispheric distribution of cognitive load allows the cerebral hemispheres to take the lead for different aspects of cognitive processing. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An analytical model to determine the ultimate load on masonry arch bridges.

This paper proposes an analytical elasto–plastic model to describe the behavior of arches. The modeling is carried out using the equations of (i) horizontal equilibrium, (ii) vertical equilibrium and (iii) equilibrium of moments. The latter equations of equilibrium are ordinary differential equations which can easily be solved by adding boundary conditions, imposing restrictions on the horizontal and vertical movement and on the rotation in the abutments of the arch. For masonry arches, including material properties allowing the occurrence of cracks and the subsequent formation of hinges is required. The latter theory has been implemented in a computer program (Matlab), offering numerical simulations. The software was used to illustrate two case-studies, i.e., the assessment of an arch loaded with a vertical point load and one with a horizontal point load.     

CRITICAL POINTS IN THE SOLIDIFICATION OF A PURE MATERIAL

Patterns in the solidification of a pure material are dealt with in this article. Results, deduced from a simple model based on heat conduction in the two phases and the effect of surface tension on the equilibrium temperature at the moving front, present a guide for experimental work. By introducing far-field conditions imitating what can be achieved in an experiment, we explain how the depths of the phases and the width of the container influence the patterns that can be seen if one advances the control variable to the critical point and then just beyond. Our new result is the existence of a third critical point. It occurs at small wave numbers and it is independent of surface tension. It appears because we take the depths of the phases into account. These depths are input values that offer the possibility of controlling crest-to-trough conduction, stabilizing in the solid, destabilizing in the liquid. The new critical point, and the patterns attending its appearance, can be found in cells of easily attainable widths.     

就地补偿在动力厂水泵电机上的应用实例

本文就我公司动力厂给水车间155kW水泵电机，进行无功就地补偿的可行性分析及经济效益研究，对工厂用电如何节能降耗有一定参考价值观。     

起落架落震试验飞机机轮三向冲击位移的动态测量

为了研究飞机起落架受冲击载荷时的功量吸收状况，须在起落架落震试验中，对飞机着陆瞬间起落架机轮在空间三个方向上冲击位移的动态变化量进行测量。为此，本文设计了四自由度空间定位装置，并使其与计算机连接，实现了落震试验过程中，起落架在高速冲击状态下机轮三向位移的有效测量与记录。     

Analytical prediction of composite beams response in fire situations

In this paper an extension of the method of the Fourier series expansion to the fire analysis of composite beams is presented. In particular the extension concerns the introduction of the temperature dependent interaction of all the components: steel beams, concrete slab and steel connectors. These last are considered of finite stiffness, and a proper account is given to the combined effect of thermal degradation of the properties, and stress amplification caused by the differential thermal expansion across the interface.The proposed method compares very well with some experimental fire tests of simply supported and framed composite beams. Due to its relative simplicity and speed, it can be used for design purposes in evaluating the critical temperature in terms of critical deflection. Finally we recall that the method is capable of dealing with every type of fastening distribution, such as discontinuous or variable length.