高沸点溶剂法合成原乙酸三甲酯

对低沸点溶剂法制备原乙酸三甲酯工艺进行了改进，比较了煤油、2-乙基己醇、氯苯、异佛尔酮、邻苯二甲酸二丁酯、乙二醇二丁醚等高沸点溶剂对反应的影响，筛选出最优高沸点溶剂煤油：研究了新反应体系的醇解pH值、溶剂的循环使用次数对反应的影响及溶剂循环损耗率，结果表明，醇解的最佳pH值为5．6；随着溶剂循环次数增加，原乙酸三甲酯收率从83．6％(1次)逐渐下降到76．7％(16次)；溶剂次平均损耗率4．6％。实现了直接蒸馏产品，溶剂循环使用的新工艺。避免了旧工艺先蒸溶剂，后蒸产品，产品大量分解，收率低等缺点。     

7.63m特大型焦炉砌筑施工技术及要点

主要针对7.63m特大型焦炉砌筑施工技术,从工程实践效果分析其施工技术在质量、工期、成本等方面收到良好的经济效益和社会效益,现对7.63m特大型焦炉施工技术作简要介绍。     

加氢降凝组合工艺技术

抚顺石油化工研究院开发的生产低凝清洁柴油加氢降凝组合工艺,集加氢精制与临氢降凝工艺技术优点于一体,具有工艺流程简单、精制及降凝效果好、柴油收率高、原料适应能力强、产品方案灵活等特点,已在哈尔滨等炼油厂得到工业应用.     

Performance analysis for range expansion in heterogeneous networks

In this paper, the uplink and downlink performance of a two-tier heterogeneous network （HetNet） with range expansion （RE） is analyzed. Different from previous works, base stations （BSs） are modeled as a spatial Poisson point process. This model can not only capture the irregularity of the BS deployment but also lead to closed form expressions. With the analytical results, the impacts of several key parameters on the coverage and throughput performance are investigated. Our results justifies the effectiveness of RE and Pico deployment. Based on our analyses, certain attention should be made on the RE design to balance the uplink and downlink performance. Our analyses are corroborated by simulations and can thus serve as a flexible and quick guidance for system design without complicated and time-consuming system-level platform construction and simulation.     

抽真空截止点的位置对压铸件气孔的影响

在真空压铸中 ,抽真空截止点的确定对压铸件的品质影响很大 ,过早和过迟将影响压铸的连续生产和不利于减少铸件的气孔。抽真空截止点应设在冲头快压射前 15～ 2 0mm处 ,真空压铸可以提高铸件的密度 1%以上。     

Dual–primal proximal point algorithms for extended convex programming

This paper presents a class of dual–primal proximal point algorithms (PPAs) for extended convex programming with linear constraints. By choosing appropriate proximal regularization matrices, the application of the general PPA to the equivalent variational inequality of the extended convex programming with linear constraints can result in easy proximal subproblems. In theory, the sequence generated by the general PPA may fail to converge since the proximal regularization matrix is asymmetric sometimes. So we construct descent directions derived from the solution obtained by the general PPA. Different step lengths and descent directions are chosen with the negligible additional computational load. The global convergence of the new algorithms is proved easily based on the fact that the sequences generated are Fejér monotone. Furthermore, we provide a simple proof for the O(1/t) convergence rate of these algorithms.     

Point-augmented biquadratic C1 subdivision surfaces

Shape artifacts, especially for convex input polyhedra, make Doo and Sabin’s generalization of bi-quadratic (bi-2) subdivision surfaces unattractive for general design. Rather than tuning the eigenstructure of the subdivision matrix, we improve shape by adding a point and enriching the refinement rules. Adding a guiding point can also yield a polar bi-2 subdivision algorithm. Both the augmented and the polar bi-2 subdivision are complemented by a new Primal Bi-2 Subdivision scheme. All surfaces are $C^1$ and can be combined.     

Molecular simulation of phase coexistence: Finite-size effects and determination of critical parameters for two- and three-dimensional Lennard-Jones fluids

Abstact The subject of this paper is the investigation of finite-size effects and the determination of critical parameters for a class of truncated Lennard-Jones potentials. Despite significant recent progress in our ability to model phase equilibria in multicomponent mixtures from direct molecular simulations, the accurate determination of critical parameters remains a difficult problem. Gibbs ensemble Monte Carlo simulations with systems of controlled linear system size are used to obtain the phase behavior in the near-critical region for two- and three dimensional Lennard-Jones fluids with reduced cutoff radii of 3, 3.5, and 5. For the two-dimensional systems, crossover of the effective exponent for the width of the coexistence curve from mean field ( = 1/2 in the immediate vicinity of the critical point to Ising-like (= 1/8) farther away is observed. Critical parameters determined by fitting the data that follow Ising-like behavior are in good agreement with literature values obtained with finite-size scaling methods. For the three-dimensional systems, no crossover to mean field-type behavior was apparent. Extrapolated results for the critical parameters are consistent with literature estimates for similar fluids. For both two- and three-dimensional fluids, system size effects on the coexistence curves away from the critical point are small, normally within simulation statistical uncertainties.Invited paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder. Colorado, U.S.A.     

地铁站场景下的可行驶区域检测

在室内环境下的机器人视觉导航任务中,可行驶区域检测是不可或缺的一部分,这是保证自动驾驶任务实现的基础.目前较多的解决方法是对数据集中出现过的障碍物进行识别来检测可行驶区域,缺乏灵活性,因此本文提出了一种针对地铁站等室内平坦地面的可行驶区域检测方法,提高实用性.本文采用经典的MobileNetV3网络对采集到的前方图像进行分类,判断是否为地面区域.由于室内地面的地标、箭头等贴纸的影响,因此需要对非地面区域进一步判断,与常规的立体障碍物进行区分.本文利用连续帧之间的特征点匹配获得相机移动距离,并利用直线拟合计算斜率的方法达到区分立体障碍物与平面地标的目的.实验表明,本文提出的方法能较好地检测机器人前方可行驶区域,具有较高的实用价值.