(1-x)NBT-xBaTiO3系陶瓷材料制备过程中烧成工艺制度的研究

选取BT6组成点,采用不同的预合成温度、烧结温度和保温时间制备样品,研究各样品的体积密度、线收缩率、晶粒发育状况和压电性能,确定最佳的烧成工艺制度。     

UHMWPE共混改性HDPE薄膜性能的研究

采用中等摩尔质量聚乙烯（MMWPE）首先对超高摩尔质量聚乙烯（UHMWPE）进行改性，然后通过两步共混法制备了HDPE／UHMWPE共混吹塑薄膜，研究了共混物的力学、流变性能以及MMWPE对UHMWPE力学和流变性能的影响。实验结果表明，当改性UHMWPE中的MMWPE的质量分数为40％时，改性UHMWPE的力学性能下降不大，而流变性能大大改善。两步法制得的HDPE／UHMWPE薄膜表面的晶点明显减少，比一步法得到的薄膜的拉伸强度和撕裂强度分别提高了20％和12％，比纯HDPE的分别提高45％和21％。     

POE-g-GMA对聚丙烯／聚磷酸铵复合材料玻璃化转变活化能的影响

以熔融反应挤出得到的POE-g-GMA作为增容剂，制备了增韧PP／APP复合材料。采用动态力学的方法，计算得到不同POE-g-GMA含量的PP／APP复合材料的玻璃化转变活化能。结果表明，在相同的测试频率下，接枝物POE-g-GMA的加入会导致PP／APP复合材料的内耗峰的峰温降低，而内耗峰的强度增加；降低复合材料的玻璃化转变活化能。这说明在PP／APP复合体系中加入POE-g-GMA可以改善PP和无机填料APP之间的相容性，使复合材料中的PP分子链段在进行玻璃化转变时更加容易。只需要较低的活化能就可以了。从中可以判断出接枝物POE-g-GMA对于PP／APP共混体系来说是很好的相容剂。     

Synthesis and characterization of novel soluble fluorinated aromatic polyamides derived from fluorinated isophthaloyl dichlorides and aromatic diamines

Two series of fluorinated aromatic polyamides derived from two novel monomers, 5-(4-trifluoromethylphenoxy)isophthaloyl dichloride (3FPC) and 5-(3,5-bistrifluoromethyl-phenoxy)isophthaloyl dichloride (6FPC) with various aromatic diamines were synthesized and characterized. Experimental results indicated that the fluorinated aromatic polyamides showed good solubility in many organic solvents. The solubility of the polyamides was affected by the trifluoromethyl substituents and the pendent phenoxy groups in the polymer backbone. The fluorinated polyamides have good thermal stability with the glass transition temperature of 206-285 °C, the temperature at 5% weight loss of 442-460 °C in nitrogen. The polyamide films also exhibited good mechanical properties and excellent electrical and dielectric properties. The fluorinated groups in the polymer backbone have played an important role in the improvement of electrical and dielectric performance of polymer.     

Dielectric loss and phase transition of sodium potassium niobate ceramic investigated by impedance spectroscopy

The dielectric permittivity of Na_0.80K_0.20NbO₃ ceramic was investigated by impedance spectroscopy. The dielectric characterization was performed from room temperature to 800 °C, in the frequency range 5 Hz–13 MHz. The bulk permittivity was derived by the variation of the imaginary part of the impedance as a function of reciprocal angular frequency. The permittivity values as a function of temperature showed two maxima. The first maximum is very similar at 200 °C and the second one positioned at around 400 °C, which was associated to Curie’s temperature. The evolution of the complex permittivity as a function of frequency and temperature was investigated. At low frequency dispersion was investigated in terms of dielectric loss. The Na_0.80K_0.20NbO₃ showed a dissipation factor between 5 and 40 over a frequency range from 1 to 10² kHz.     

高聚合度PVC／TPU共混物的制备与研究

本文研究了采用高聚合度聚氯乙烯(PVC)和热塑性聚氨酯(TPU)为主体材料制备高聚合度PVC/TPU共混物的过程,讨论了高聚合度PVC/TPU并用比、填料、增塑剂、共混工艺等因素对高聚合度PVC/TPU共混物性能的影响。     

通信用片式介质陶瓷双工器的设计与制作

介绍了通信用介质陶瓷双工器的设计方法和制作过程。该双工器是由接收滤波器和发射滤波器组成的。每种滤波器是由一块高介电常数、高Q值和接近零温度系数的介质陶瓷块制成的。这个陶瓷块上包含两个四分之一波长同轴谐振腔、输入及输出电极和耦合装置,并且输入及输出电极在陶瓷块的同一侧面上,因此滤波器具有体积小巧,结构稳定和安装方便的特点。采用介电常数为90的陶瓷材料制作了中心频率分别为903MHz和927MHz的接收和发射滤波器,经网络分析仪测试,各项技术指标满足设计要求。     

PBT/官能化聚烯烃弹性体共混体系的力学性能与相形态

考察了马来酸酐接枝乙烯-辛烯共聚物（POE-g-MAH）和乙烯-丙烯酸甲酯-甲基丙烯酸缩水甘油酯三元共聚物（E-MA-GMA）对聚对苯二甲酸丁二醇酯（PBT）的增韧作用。结果表明，未接枝的POE弹性体对PBT缺口冲击韧性的改善作用不大。两种官能化聚烯烃弹性体（E-MA-GMA、POE-g-MAH）对PBT具有显著的增韧作用。当弹性体用量分别达到8．5％和10％以后，共混物都各自出现明显的脆／韧转变现象。这意味着在达到同样的冲击韧性时，PBT／E—MA—GMA共混体系的拉伸强度损失较小。SEM显示，PBT／E—MA—GMA共混体系中分散相具有更细微的分散，有效地诱导PBT基体产生银纹和剪切屈服，消耗大量的冲击能。     

相容剂对PS／PP共混合金混容形态和性能的影响

研制了马来酸酯接枝聚丙烯相容剂，并将其用于聚苯乙烯／聚丙烯的共混改性；通过力学性能测试、透射电镜分析、差示扫描量热分析等方法研究了相容剂对ＰＳ／ＰＰ合金的混容形态和力学性能的影响。结果表明：相容剂的加入，使ＰＳ／ＰＰ由不相容的独立聚集的两相变为相畴很小的细分散相，共混高分子的链段运动也表现为趋于均相结构的运动方式。加入相容剂后共混材料的冲击强度有明显提高，拉伸强度也有所上升。相容剂的含量对性能也有较大影响，相容剂用量为８％时，力学性能最好，从ＤＳＣ测试中可以看到此时共混物趋向均相体系；继续增大相容剂用量，合金的力学性能反而下降。     

NCT-11型有机硫水解催化剂的研制

介绍了NCT－11型有机硫水解催化剂实验室研制情况。结果表明，在240～280℃时，该催化剂对气体中的COS有优越的水解性能。在280℃、1200h-1、进口COS—2000ｘ10-6　条件下，水解转化率＞90％。