基于知识情感等级BDI主体的决策行为模型研究

为了将知识、信念、愿望和意图以及害怕、焦虑和自信对决策行为的影响的强烈程度进行形式化,把无穷值的卢卡斯维茨逻辑的真值取值范围从[0,1]扩展到[-1,1]。知识情感等级BDI主体的决策行为通过添加了具体条件的不同背景的不同测度来决定;知识情感等级BDI主体模型清晰地表示了主体的知识状态、心智状态和情感状态的不确定性;此模型可以轻易地向其他类型的主体进行推广。在给出了知识情感等级BDI模型的语言、语义以及此模型的不同背景之间的相互关系之后,对知识情感等级BDI主体的军事决策行为进行了实例分析。此研究旨在为分布式人工智能和军事仿真提供形式支持。     

Effect of H2O adsorption on the electrical transport properties of double-walled carbon nanotubes

Water molecules adsorbed on a double-walled carbon nanotube (DWCNT) serve as charge trapping centers when present in low density and as electron donors when present in high density. There is a discontinuous change between the low- and high-density regions. H₂O molecules are apt to be adsorbed on the outer surface of DWCNTs, and in this case the electrical transport properties are extremely sensitive to environment, which suggests that DWCNTs are hole doped and act as an electric dipole with the inner tube.     

Zinc hydroxystannate and zinc stannate as flame‐retardant agents for flexible poly(vinyl chloride)

The flame‐retardant and smoke‐suppressant properties of inorganic tin compounds such as zinc hydroxystannate (ZHS) and zinc stannate (ZS) were investigated in a comparison with alumina trihydrate, magnesium hydroxide, and Sb₂O₃ through the limiting oxygen index test and smoke density test. The flame‐retardant mechanisms were studied through the char yield test, SEM, quantitative analysis, thermogravimetry and differential thermal analysis. The thermal degradation in air of flexible PVC treated with the above compounds was studied by thermal analysis from ambient temperature to 800°C. The results showed that tin compounds such as ZHS and ZS could be used as a highly effective flame retardant for flexible PVC, and it appears that the tin compound may exert its action in both the condensed and vapor phases, but mainly in condensed phases as a Lewis acid. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1469–1475, 2005     

Preparation and properties of PET/PA6 copolymer/montmorillonite hybrid nanocomposite

From in situ polycondensation, a poly(ethylene terephthalate)/Polyamide 6 copolymer/montmorillonite nanocomposite was prepared, after the treatment of montmorillonite (MMT) with a water soluble polymer. The resulting nanocomposites were characterized by X‐ray diffraction (XRD), differential scanning calorimeter (DSC), nuclear magnetic resonance (NMR), dynamic mechanical analysis (DMA), and transmission electron microscopy (TEM). The results of DSC, ¹H NMR, and DMA proved that the nanocomposite synthesized was PET/PA6 copolymer/MMT nanocomposite, not the PET/PA6 blend/MMT nanocomposite. The results of XRD and TEM proved that the dispersion of MMT was improved observably after the introduction of PA6 molecular chain into PET. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2512–2517, 2006     

Reactive compatibilization of PE/PS blends. Effect of copolymer chain length on interfacial adhesion and mechanical behavior

This paper deals with in situ compatibilization of PE/PS blends via Friedel-Crafts reaction, performed at the interphase. Two polyethylenes having different molecular weights, and the same PS, were used along a wide range of catalyst concentration. The influence of the graft copolymer architecture and content on the efficiency of blend compatibilization was studied. The emulsifying effect, morphological aspects and mechanical behavior were also assessed for these blends. The amount of copolymer formed increases with catalyst concentration and the short chain length fraction of the homopolymers. The high molecular weight (MW) copolymers behaved as better compatibilizers as they showed, at the cmc, greater graft copolymer concentration than the low MW ones. A substantial increase in interfacial adhesion and particle size reduction was observed, even at catalyst concentrations as low as 0.3 wt%. In correspondence, mechanical properties, like ductility and yield strength, were enhanced by the effect of this Friedel-Crafts reaction's compatibilization.     

Synthesis of water-soluble single-walled carbon nanotubes by RAFT polymerization

Water-soluble single-walled carbon nanotubes (SWNTs) were synthesized by grafting poly(acrylamide) (PAM) from the surface of SWNT via reversible addition-fragmentation chain transfer (RAFT) polymerization. The RAFT agents were covalently attached to the SWNTs by functionalizing SWNTs with in situ generated diazonium compounds. The product was characterized by means of FT-IR, Raman, ¹H NMR, TGA and TEM. The results showed that PAM chains had successfully grafted from SWNT by RAFT polymerization. The amount of PAM grown from SWNT increased with the polymerization time. The acrylamide conversion increased linearly with the polymerization time, indicating the “living” characteristics of the RAFT polymerization. TEM was utilized to image PAM-g-SWNT, showing relatively uniform polymer coatings present on the surface of individual, debundled nanotubes.     

含氰污水处理工程设计体会

龙泉金矿在全泥氰化提金过程中产生含氰化物１７４．７６ｍｇ／Ｌ的洗涤废水，通过碱式氯化法处理后，再由渣浆泵送入尾矿库进行自然净化作用，污水得到进一步净化，尾矿库溢流废水氰化物浓度低于０．５ｍｇ／Ｌ，废水排入小梅溪后，下游第一个居民取水点氰化物浓度低于０．００４ｍｇ／Ｌ，达到了国家规定的标准。     

Polyimide foams with ultralow dielectric constants

To explore ultralow dielectric constant polyimide, the crosslinked polyimide foams (PIFs) were prepared from 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA), 4,4′‐oxydianiline (ODA), and 2,4,6‐triaminopyrimidine (TAP) via a poly(ester–amine salt) (PEAS) process. FTIR measurements indicated that TAP did not yield a negative effect on imidization of PEAS precursors. SEM measurement revealed the homogeneous cell structure. Through using TAP as a crosslinking monomer, the mechanical properties of PIFs could be improved in comparison with uncrosslinked BTDA/ODA based PIF. The crosslinked PIFs still exhibited excellent thermal stability with 5% weight loss temperatures higher than 520°C. In the field with frequency higher than 100 Hz, the dielectric constants of the obtained PIFs ranged from 1.77 to 2.4, and the dielectric losses were smaller than 3 × 10^?2 at 25–150°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1734–1740, 2006     

Enzymatic esterification of glycerol II. Lipase-catalyzed synthesis of regioisomerically pure 1(3)-rac-monoacylglycerols

Regioisomerically pure 1(3)-rac-monoacylglycerols are conveniently prepared in high yields (>75%) and in multigram quantities by enzymatic esterification of glycerol in the presence of various lipases(Chromobacterium viscosum, Rhizopus delemar, Rhizomucor miehei) with a variety of different acyl donors, such as free fatty acids, fatty acid alkyl esters, vinyl esters and triacylglycerols, as well as natural fats and oils. All reactions are carried out in aprotic organic solvents with low water content, namelyn-hexane, diethyl ether, tBuOMe or mixtures of these solvents. Essential for the success of these transformations were the following two factors. First, the creation of an artificial interphase between the solvent-immiscible hydrophilic glycerol and the hydrophobic reaction medium by its adsorption onto a solid support. Second, a facile system for the separation of the desired monoacylglycerol from the reaction mixture, coupled with the continuous recycling of acyl donor and undesirable by-products.     

微波促进二氯菊酸甲酯的水解新工艺研究

采用微波技术对二氯菊酸甲酯在NaOH溶液中水解为二氯菊酸工艺进行了研究。结果表明,微波促进下最佳水解条件为:反应温度90℃,功率100 W,反应时间10 m in,物质的量比n(二氯菊酸甲酯)∶n(C2H5OH)∶n(NaOH)=1∶4∶1.5,重结晶后收率高达99.6%。与传统条件相比,时间缩短30倍,收率提高24.6%,无水乙醇用量减少60%,NaOH用量减少17%。并用红外光谱和熔点对二氯菊酸进行表征。