盘式干燥机在高纯碳酸钡生产中的应用

对盘式干燥机的工作原理、结构特点进行了详细介绍，并将其它干燥设备和盘式干燥机作了对比，指出高纯碳酸钡行业采用盘式干燥机可以将生产成本降到最低限度，而产品质量可以得到很大提高。盘式干燥机也可用于高纯碳酸锶、硫酸钡等粘性物料的干燥，效果也非常理想，应用前景广阔。     

Estimation of Concentration of Particles in Polymerizing Fluid during Centrifugal Casting of Functionally Graded Polymer Composites

The concentration of uniformly distributed particles in a fluid changes with time in the direction of gravitational or centrifugal force to form a concentration gradient. The change in the concentration is an outcome of velocity variation of particles in a fluid. A modified equation for terminal velocity, v _m of particles in polymerizing-fluid under centrifugal force is proposed to estimate the changes in the volume fraction of particles in the graded composites. The proposed equation introduces the effect of cure kinetics of polymer and its effect on particle movement in the model that was based on the modified Stoke’s law, considering the parameters related to particle hindrance, centrifugal force, particle dimensions, viscosity variation etc. The model predictions of concentration changes at the different locations of samples were compared with calcium carbonate filled polysulphide-modified-epoxy graded composites prepared by centrifugal casting.. The effect of particle size, delayed curing rate of matrix were explored. The simulated results are in good agreement with those of experiments.     

Barium Carbonate Phase on the Surfaces of Barium Titanate Particles and in Situ Transmission Electron Microscopy Observation of Its Decomposition

A BaCO₃ phase is found on the surfaces of hydrothermally synthesized BaTiO₃ particles; it occurs as aggregates or small protuberances. A small proportion of the phase decomposes to BaO crystallites when heated by a convergent electron beam in a transmission electron microscope. The BaO and BaCO₃ crystallites disappear when they are irradiated successively by the convergent electron beam. The BaO crystallites and the BaCO₃ phase sublimate and/or react with BaTiO₃ crystals whose surface layers are deficient in Ba²⁺ ions.     

碳酸钙对乙烯-丙烯酸丁酯共聚物阻燃与力学性能及热降解行为影响研究

采用极限氧指数法、热重分析和差示扫描量热分析等研究了碳酸钙（CaCO3）对乙烯-丙烯酸丁酯共聚物（EBA）阻燃及热降解行为的影响，探讨了CaCO3对EBA力学性能和熔体流动速率的影响。结果表明，CaCO3降低了EBA的拉伸强度、断裂伸长率和熔体流动速率，但复合阻燃材料仍具有良好的加工性能；当CaoCO3含量为60％（质量分数，下同）时，阻燃材料的极限氧指数可达28．5％。CaCO3通过EBA在热降解过程中与之发生化学反应来改变EBA的热降解行为，提高在高温下的热稳定性，降低EBA的热降解速率，促进高温下成炭在凝缩相中发挥阻燃作用。此外，CaCO3与EBA在热降解过程中形成隔热、隔氧的多孔泡沫膨胀结构，可进一步加强阻燃效果。     

Electrochemical characteristics of phase-separated polymer electrolyte based on poly(vinylidene fluoride-co-hexafluoropropane) and ethylene carbonate

A polymer electrolyte based on microporous poly(vinylidene fluoride-co-hexafluoropropane) (PVdF-HFP) film was studied for use in lithium ion batteries. The microporous PVdF-HFP (Kynar 2801) matrix was prepared from a cast of homogeneous mixture of PVdF-HFP and solvents such as ethylene carbonate (EC), dimethyl carbonate (DMC), and ethyl methyl carbonate (EMC). After evaporation of DMC and EMC, a sold film of the PVdF-HFP and the EC mixture was obtained. EC-rich phase started its formation in the PVdF-HFP/EC film at EC content of about 60 wt.% based on the total weight of PVdF-HFP and EC. The formation of the new phase resulted in the abrupt increase of the porosity of the PVdF-HFP matrix from 32 to 62%. The ionic conductivity of the film soaked in 1 M LiPF₆-EC/DMC=1/1 was significantly increased from order of 10⁻⁴ S/cm to order of 10⁻³ S/cm at the EC content of 60 wt.%. Thermal and spectroscopic investigations showed that most of the EC interact with PVdF-HFP with the EC content being below 60 wt.%. MCMB/polymer electrolyte/LiCoO₂ cells employing the microporous PVdF-HFP polymer film showed stable charging/discharging characteristics at 1C rate and good rate capability.     

碳酸二甲酯市场现状及技术进展

目前,全球碳酸二甲酯(DMC)的产量约为12万t/a。生产方法有光气法、酯交换法、甲醇氧化羰基法和二氧化碳-甲醇直接合成法。我国DMC产量不足3万t/a,主要采用酯交换法和甲醇液相氧化羰基法。DMC可作为羰基化试剂代替剧毒物质光气用于合成聚碳酸酯、异氰酸酯、杀虫剂西维因等,用作甲基化试剂代替致癌物硫酸二甲酯合成苯甲醚。     

由氯化钙制备纳米碳酸钙研究

随着国民经济的发展,对纳米碳酸钙的需求量越来越大.基于化工生产中大量副产氯化钙,以氯化钙和碳酸铵为原料,对制备纳米碳酸钙进行了研究.实验研究了添加剂、反应温度和反应物浓度等工艺条件对产物粒径的影响,并采用XRD和TEM对产物进行了初步分析.实验结果表明:不同的添加剂对产物粒径以及形貌具有一定的影响,当氯化钙和碳酸铵配料比为1.0:1.0 mol/mol、反应温度为15℃和氯化钙浓度为0.3 mol/L时,以有机醇A和磷酸系化合物G为添加剂制备的产物为方解石型球状碳酸钙,粒径在50 nm左右.     

酯交换法合成碳酸二苯酯研究进展

对碳酸二苯酯合成用催化剂、合成工艺、反应装置等进行了综述。认为国内应加强酯交换法合成碳酸二苯酯的基础研究 ,尽快实现其产业化     

碳酸二苯酯技术发展现状及展望

综述了碳酸二苯酯多种合成技术的发展现状，重点介绍了碳酸二甲酯与苯酚酯交换法和氧化羰基化法技术，并对碳酸二苯酯技术在国内的发展进行了展望。     

碳酸二苯酯的合成工艺新进展

碳酸二苯酯是合成聚碳酸酯的重要原料,具有广泛的用途和应用前景.其合成方法主要有酯交换法、尿素法和二硫化碳法等.本文介绍了国内外碳酸二苯酯的现有生产技术及合成路线,综述了国内外的最新进展,并对今后的发展趋势作了展望.