从制药废水中回收金霉素的研究

本文介绍用微孔管表面预涂助滤剂、反渗透浓缩技术从抗生素厂废水中回收金霉素的研究，取得了较好的效果。从而为抗生素厂金霉素废水提供一种新的治理途径。     

Synthesis of ordered polymers by direct polycondensation

A series of ordered polymers can be prepared by direct polycondensation of nonsymmetric monomers using diphenyl(2,3-dihydro-2-oxo-3-benzothiazolyl)phosphonate (1) as a condensing agent. The methodology and requirements for the preparation of ordered polymer are first presented. Then, the following ordered polymer syntheses are described: (1) ordered polyamides (head-to-head or tail-to-tail) from a symmetric monomer and a nonsymmetric monomer. (2) the ordered polyamide (head-to-tail) from a symmetric monomer and a nonsymmetric monomer. (3) the ordered (-abcd-) polymer from a pair of two symmetric monomers and a nonsymmetric monomer. (4) the ordered (-abcdef-) polymer from nonsymmetric monomers, XabX, YcdY, and ZefZ.     

超滤-反渗透集成工艺处理玉米酒糟废水

研究了玉米酒精生产过程中产生的玉米酒糟废水的膜分离过程,开发了处理玉米酒糟废水的超滤-反渗透集成工艺。超滤选用截留相对分子质量为6 000的GR81PP膜平板分离器,入口压力控制为0.6 MPa,操作温度为50℃;反渗透选用标准脱盐率为90%的ESNAI-4040卷式膜分离器,入口压力控制为2.2 MPa,操作温度为40℃。反渗透透过液中蛋白质的平均截留率为94.70%,甘油的平均截留率为65.15%,COD值降到1 000 mg/L左右,可作为工艺回用水,而且反渗透浓缩液中可回收甘油等有用物质,超滤浓缩液可浓缩成饲料,节能效果显著。     

工业污水深度处理回用技术研究

通过对石化企业工业污水进行曝气生物滤池、连续微滤、反渗透等深度处理,使出水满足工业化用水的水质要求,从而得以回用。     

K2CO3生产中NH4Cl废水的回收技术

分析了反渗透的基本原理，详细介绍了采用反渗透膜分离技术回收利用K2CO3生产过程中产生的含NH4Cl废水的工艺过程。处理低浓度含NH4Cl废水100m^3／h和高浓度含NH4Cl废水40m^3／h工业化装置建成投产后，处理前低浓度废水含NH4Cl1000mg／L，高浓度废水含NH4Cl10000mg／L，pH=8～10；处理后，产品淡水含NH4Cl≤10mg／L、pH=7～8，产品浓水含NH4Cl≥60000mg／L、pH=8～lO。该装置的投运，取得了明显的经济效益和社会效益。     

The effect of two-layer cathode on the performance of the direct methanol fuel cell

To reduce the effect of methanol permeated from the anode, the structure of the cathode was modified from a single layer with Pt black catalyst to two-layer with PtRh black and Pt black catalysts, respectively. The current density of the direct methanol fuel cell (DMFC) using the two-layer cathode was improved to 228 mA/cm^-2 compared to that (180 mA/cm^-2) of the DMFC using the single layer cathode at 0.3 V and 303 K. From the cyclic voltammograms (CVs), it is indicated that the amount of adsorbates on the metal catalyst in the two-layer cathode is less than that of adsorbates in the single layer cathode after methanol test. In addition, the adsorbates were removed very rapidly by electrochemical oxidation from the two-layer cathode. It is suggested fromex situ X-ray absorption near edge structure analysis that the d-electron vacancy of Pt atom in the two-layer cathode is not changed by the methanol test. Thus, Pt is not covered with the adsorbates, which agrees well with the results of CV.     

Glass powders and reactive silicone binder: Interactions and application to additive manufacturing of bioactive glass-ceramic scaffolds

A novel concept for the additive manufacturing of three-dimensional glass-ceramic scaffolds, to be used for tissue engineering applications, was based on fine glass powders mixed with a reactive binder, in the form of a commercial silicone. The powders consisted of ‘silica-defective glass’ specifically designed to react, upon firing in air, with the amorphous silica yielded by the binder. By silica incorporation, the glass was intended to reach the composition of an already known CaONa₂OB₂O₃SiO₂ system. Silica from the binder provided up to 15 wt% of the total silica. With the same overall formulation, silicone-glass powder mixtures led to nearly the same phase assemblage formed by the reference system, crystallizing into wollastonite (CaSiO₃) and Ca-borate (CaB₂O₄). Samples from silicone-glass powder mixtures exhibited an excellent shape retention after firing, which was later exploited in highly porous reticulated scaffolds, obtained by means of direct ink writing (DIW).     

低压反渗透复合膜NTR—7250的脱盐性能

测定了ＮＴＲ－７２５０膜的脱盐性能。结果表明，该膜水通量约为ＣＡ膜的５倍；脱盐率主要受阴离子控制，并随电荷数递增；水中结垢成分被优先除去，ＳＯ４＾２－，硬度和ＨＣＯ３＾－除去率分别大于９７％，８１％，７６％；该膜抗氧化能力与ＣＡ膜相当，而适用ＰＨ范围更宽，并且可在较高水温下长期使用。     

环氧丙烷生产工艺进展

综述了近年来环氧丙烷合成工艺的新进展,包括对现有环氧丙烷生产工艺的革新、直接氧化法、光催化环氧化等方法,并对各种方法的特点和发展前景进行了讨论.     

核电厂小型承压容器泄漏率直读的可行性分析

对比气体泄漏率的精确计算值与直读值的差异,分析误差的成因并找出切实可行的缩小误差的方法,使得直读法在小型承压容器的大批量泄漏率检测中发挥了重要的作用。