Comparative studies on the electrochemical and physicochemical behaviour of three different benzimidazole motifs as corrosion inhibitor for mild steel in hydrochloric acid

This paper examines the anticorrosion characteristics of three different benzimidazole derivatives towards mild steel in 0.5?M hydrochloric acid at temperature ranges from 303 to 323?K. The benzimidazole derivatives used for the screening studies are 2-(2-methyl-1H-benzimidazol-1-yl) acethydrazide (EMBAH), 2-(2-ethyl-1H-benzimidazol-1-yl) acethydrazide (EEBAH) and 2-(2-propyl-1H-benzimidazol-1-yl) acethydrazide (EPBAH). The corrosion inhibition was investigated by weight loss, electrochemical impedance spectroscopy and potentiodynamic polarization studies. The adsorption interaction between metal and inhibitor followed Langmuir adsorption isotherm. The Gibb’s free energy values clarify the spontaneous nature of adsorption process. The temperature dependence of inhibition efficiency was explained by considering thermodynamic parameters of adsorption and kinetic parameters of corrosion. These inhibitors showed good efficiency at lower as well as moderately higher temperatures. Quantum chemical calculations were done using DFT at the B3LYP/6-31G¹ level to study the electronic properties of the molecules for correlating the inhibitive effect and molecular structure.     

Hydrogen evolution and quantum calculations for potassium sorbate as an efficient green inhibitor for biodegradable magnesium alloy staples used for sleeve gastrectomy surgery

This work-study the hydrogen evolution rate and inhibitive properties of potassium sorbate, as an antimicrobial and food preservative substance, on the corrosion performance of biodegradable AZ91E magnesium alloy utilized as staples in Sleeve Gastrectomy surgery. This substance used for the first time to protect the alloy from the fast surface degradation process when surrounded by simulated peritoneal fluid (SPF) as a corrosive environment in the stomach. Theoretical quantum calculations were utilized to ensure the inhibition effect of potassium sorbate for the tested alloy as a staple. The corrosion resistance was assessed via electrochemical measurements. The degradation and hydrogen evolution rate is found to be significantly reduced with increasing potassium sorbate concentration. The outcomes displayed that the higher concentration of potassium sorbate (10⁻³ M) is the most effective corrosion resistant one with inhibition efficiency reaches 99.6% which is mainly ascribed to the creation of a thin protective film of Mg-sorbate. The results were confirmed with a scanning electron microscope (SEM) images. A cell viability test for the alloy was done using MTT assay which clarifies that the alloy immersed in the higher potassium sorbate concentration have higher cell viability and proliferation.     

Corrosion behaviour of AA2024 aluminium alloy in different tempers in NaCl solution and with the CeCl3 corrosion inhibitor

The paper analyses the corrosion behaviour of naturally and artificially aged AA2024 alloy in NaCl solution and in the presence of an environment-friendly corrosion inhibitor, CeCl₃. On the basis of the values of polarisation resistance and corrosion current density, the corrosion resistance of the protective inhibitor film is established as well as the general corrosion resistance of this aluminium alloy. Resistance to pit formation is determined based on the difference in pitting and corrosion potentials while resistance to pit growth is determined based on the amount of charge consumed during pit growth. A scanning electron microscope is used to examine the morphology of the pits formed during the pitting corrosion testing, as well as to determine the cerium content on intermetallic particles and the matrix AA2024 alloy. The corrosion behaviour of AA2024 alloy is investigated after different test periods in NaCl solution and in the same solution with the CeCl₃ inhibitor. The corrosion resistance of both tempers of AA2024 alloy is more than one order of magnitude higher in the presence of CeCl₃. An explanation of the observed differences in the corrosion behaviour of the naturally and artificially aged AA2024 alloy is proposed. Different corrosion behaviour of the alloy after different test periods is also explained.     

Corrosion of Mg alloys EV31A,WE43B,and ZE41A in chloride- and sulfate-containing solutions saturated with magnesium hydroxide

This study studied corrosion in 0.1 M Na₂SO₄, 0.1 M NaCl, and 0.6 M NaCl, all saturated with Mg(OH)₂, using weight loss, hydrogen evolution, and electrochemical measurements. Corrosion was similar in all cases. Nevertheless, the corrosion rates were alloy-dependent, were somewhat lower in 0.1 M Na₂SO₄ than in 0.1 M NaCl, and increased with NaCl concentration. The corrosion damage morphology was similar for all solutions; the extent correlated with the corrosion rate. The corrosion rates evaluated by the electrochemical methods were lower than those evaluated from hydrogen evolution, consistent with the Mg corrosion mechanism involving the unipositive Mg⁺ ion.     

Synergistic effect of iodide ions and bark resin of Schinus molle for the corrosion inhibition of API5L X70 pipeline steel in H2SO4

The synergistic effect of bark resin of Schinus molle (BRSM) and iodide ions in 0.5 M sulfuric acid has been studied for the first time by potentiodynamic polarization and electrochemical impedance spectroscopy measurements; also, the surface morphology has been analyzed by scanning electron microscopy–energy-dispersive X-ray spectroscopic analysis in the present work. The results show that the BRSM and iodide ions have an evident synergistic inhibition effect in a 0.5-M sulfuric acid solution. The adsorption of the BRSM/iodide ion system follows the Langmuir adsorption isotherm and acts as a mixed-type inhibitor in sulfuric acid. The BRSM/iodide ion system is an effective inhibitor for API5L X70 pipeline steel in the 0.5-M sulfuric acid solution. The maximum percentage inhibition efficiency is equal to 99% at 1 g/L BRSM + 2 mM KI.     

Corrosion and mechanical properties of plasma electrolytic oxidation‐coated AZ80 magnesium alloy

Plasma electrolytic oxidation (PEO) coatings were produced on AZ80 magnesium alloy in a solution containing silicates and phosphates and working at high current densities with short treatment times. The effect of a sealing treatment in boiling water on corrosion and mechanical properties of the coatings were investigated. Moreover, the corrosion mechanism of the samples with and without the sealing treatment was evaluated. The microstructure of the coatings was characterized with scanning electron microscope observation and X‐ray diffraction analysis. The mechanical properties were evaluated with nanoindentation tests and the corrosion resistance was studied by potentiodynamic polarization, electrochemical impedance spectroscopy, and scanning vibrating electrode technique. The results showed that the sealing did not influence the microstructure and the mechanical properties of the samples and instead produced a remarkable increase in the corrosion resistance. The crevice corrosion, present in the sample without the sealing, was avoided with the treatment in boiling water.     

Corrosion Protection of AA2024-T3 by Cerium Malate and Cerium Malate-Doped Sol-Gel Coatings

Cerium malate (CeMal) was tested as a corrosion inhibitor for AA2024-T3 in this work. Corrosion inhibition on bare AA2024-T3 indicated that the inhibiting effect was a result of the synergistic effect of cerium cations and maleic anions. The corrosion of AA2024-T3 was stagnated by greatly reducing the corrosion current when CeMal was present in NaCl solutions. CeMal was adsorbed on the surface of AA2024-T3 forming a protective film in the initial stage. Then, cerium cations transformed to cerium oxide/hydroxides, precipitating on the cathode sites to inhibit the further corrosion. The electrochemical impedance spectra results of the sol-gel coatings proved that CeMal was an effective corrosion inhibitor in the sol-gel coatings to provide corrosion protection for AA2024-T3.     

Relationship between the inductive response observed during electrochemical impedance measurements on aluminium and local corrosion processes

In situ real-time imaging and electrochemical impedance spectroscopy (EIS) measurements were performed on pure aluminium, aluminium-copper and copper electrodes, with the aim to elucidate the relationship between the shape of EIS spectra and the local processes occurring on the surface of corroding aluminium, with particular attention to the appearance of inductive behaviour. When a stable oxide was present on the aluminium surface, the impedance modulus increased with decreasing frequencies, indicating the absence of inductive behaviour. Conversely, the presence of depassivating condition coupled with the availability of some anodic current, generated localized corrosion and associated hydrogen evolution at the corrosion front (also known as superfluous hydrogen evolution). In these conditions, a clear inductive behaviour was observed, regardless on the source of the anodic current at the corrosion front, i.e. galvanic coupling or external anodic polarization.