Effectiveness of some diquaternary ammonium surfactants as corrosion inhibitors for carbon steel in 0.5 M HCl solution

Four Gemini surfactants were synthesized and characterized using elemental analysis, FTIR and ¹H NMR spectroscopy. The synthesized compounds were evaluated as corrosion inhibitors for carbon steel in 0.5 M HCl solution. The inhibition efficiencies of the tested inhibitors were depended on the hydrophobic chain length and the used doses of the inhibitors. The polarization measurements showed that these inhibitors are acting as mixed inhibitors for both anodic and cathodic reactions. The results showed that the inhibition efficiencies were increased by increasing the inhibitor doses and the hydrophobic chain length and reached the maximum at 500 ppm by weight for stearyl derivative. The efficiencies obtained from the impedance measurements were in good agreement with those obtained from the gravimetrical and polarization techniques which prove the validity of these tolls in the measurements of the tested inhibitors.     

Corrosion resistance of amorphous aluminium-molybdenum alloys in an acidic chloride environment

Pure aluminium corrodes readily in 1 M HCl solution while its supersaturated alloys with Mo, explored in this work, exhibit excellent corrosion properties due to the oxide barrier film formation on the alloy surface. The influence of Mo content in the alloy on the potential and charge distribution across the system alloy |oxide film| solution was studied in situ using dc and ac electrochemical methods. Passivity, a sudden change in electrode impedance, and the onset of secondary passivity and pitting were discussed in terms of the solute segregation, according to the solute-rich mechanism, change in the alumina structure and solid state processes connected with the transport of point defects and spatial distribution of surface charge.     

Corrosion resistance of the anti‐sulfide steel in the CO2/H2S containing solutions

The present work primarily investigates the corrosion characterization of the common P110 steel and the anti‐sulfide P110SS steel in CO₂‐containing solution with or without hydrosulfuric acid (H₂S) at 70 °C. The electrochemical techniques such as potentiodynamic polarization sweep and electrochemical impedance spectroscopy (EIS) were used to disclose the differences of the corrosion mechanisms between both P110 and P110SS steels in CO₂‐containing solution with various additions of H₂S. The EIS data fitted by ZsimpWin software were analyzed and discussed. The experimental results indicated that H₂S could accelerate and also inhibit the corrosion attack according to the changes of corrosive environments.     

Electrochemical characterization of a polybenzimidazole-based high temperature proton exchange membrane unit cell

This work constitutes detailed EIS (Electrochemical Impedance Spectroscopy) measurements on a PBI-based HT-PEM unit cell. By means of EIS the fuel cell is characterized in several modes of operation by varying the current density, temperature and the stoichiometry of the reactant gases. Using Equivalent Circuit (EC) modeling key parameters, such as the membrane resistance, charge transfer resistance and gas transfer resistance are identified, however the physical interpretation of the parameters derived from EC’s are doubtful as discussed in this paper. The EC model proposed, which is a modified Randles circuit, provides a reasonably good fit at all the conditions tested. The measurements reveal that the cell temperature is an important parameter, which influences the cell performance significantly, especially the charge transfer resistance proved to be very temperature dependent. The transport of oxygen to the Oxygen Reduction Reaction (ORR) likewise has a substantial effect on the impedance spectra, results showed that the gas transfer resistance has an exponential-like dependency on the air stoichiometry. Based on the present results and results found in recent publications it is still not clear what exactly causes the distinctive low frequency loop occurring at oxygen starvation. Contrary to the oxygen transport, the transport of hydrogen to the Hydrogen Oxidation Reaction (HOR), in the stoichiometry range investigated in this study, shows no measurable change in the impedance data. Generally, this work is expected to provide a basis for future development of impedance-based fuel cell diagnostic systems for HT-PEM fuel cell.     

Corrosion inhibition of steel in chloride-containing alkaline solutions

Some organic inhibitors of steel corrosion in saturated calcium hydroxide solutions containing 0.1 M chlorides were investigated to elucidate their interactions with the steel surface. The compounds studied were dicyclohexylammonium nitrite (DCHAMN), dicyclohexylamine (DCHA), sodium -glycerophosphate (GPH) and 5-hexyl-benzotriazole (C6BTA). Sodium nitrite (SN) was also studied as a reference. The techniques applied were electrochemical impedance spectroscopy (EIS), polarization curves, cyclic voltammetry (CV) and Fourier transform infrared (FTIR) spectroscopy. FTIR spectra showed that DCHAMN, DCHA, GPH and C6BTA interact with the steel surface by chemisorption and some information about the mechanism also emerged. From DCHAMN solution, DCHA chemisorption is induced by slow salt hydrolysis. CV tests show that, among chemisorbed substances, only GPH avoids chloride penetration on cycling, most likely due to a quick chemisorption, while DCHAMN can only enlarge the passive potential range. Addition of SN also prevents chloride attack on cycling. Twenty days of immersion in inhibited solutions revealed that, besides SN, GPH and DCHAMN also form an impervious surface film on steel, which blocks any localized corrosion attack, whereas in the case of DCHA and C6BTA solutions, pitting corrosion is slowed down, but not avoided. DCHAMN exhibits the highest inhibiting efficiency at long immersion times, as a result of a synergetic inhibitive action which develops between nitrite and chemisorbed DCHA.     

纳米氧化锌改性聚氨酯复合涂层的防腐性能

研究了添加不同颜基比（P／B）ZnO的聚氨酯涂料在3．5％氯化钠溶液中的电化学阻抗谱特征，提出了涂层电极在浸泡阶段对应的不同阻抗模型，结果表明，添加量为P／B=0．3的纳米复合涂层，颜料分布均匀适中，具有最佳电化学及耐盐雾性能．纳米复合涂层的抗介质渗透能力明显优于普通涂层，其原因是纳米材料独特的表面效应使其致密性有所提高，     

企业高层管理信息系统中的管理者认知研究

本文从高层管理信息系统的概念入手,重点对E(高层管理者)、I(高层管理者的信息需求)、S(提供信息的计算机系统)三大部分中的E进行系统研究,对高层管理者的角色,职能,工作进行分析,以供管理者参考.