磁控反应溅射氧化镍薄膜电致变色特性的研究

本文介绍了直流磁控反应溅射制备的氧化镍薄膜。研究了所沉积的氧化镍薄膜的电致变色性能、响应速度、开路记忆能力及循环寿命。实验结果表明：氧化镍薄膜初始态透射率和电化学测试方法与条件的选择对其电致变色性能有较大的影响。     

Research Impact on Emerging Quantum Materials for Electrochromic Applications

Electrochromic devices (ECDs), which can dynamically vary optical properties under applied specific voltage, have been actively studied for use in applications requiring human comfort and energy efficiency (i. e. smart windows and electronic displays). In order to improve the electrochromic (EC) performances, many researchers have been using nanomaterials. In this respect, in the present study, we highlight some of valuable examples using WO₃ from unique nanostructures to quantum dots (QDs) and discuss the core relationship between nanostructuring and EC performances. In particular, the present study proposes major impact on the novel approach using QDs to upgrade technical value and application of ECDs.     

Electrochromic properties of nickel oxide based thin films sputter deposited in the presence of water vapor

Electrochromic nickel oxide based thin films were prepared by reactive RF magnetron sputtering from metallic nickel in the presence of Ar, O₂ and H₂O. The water vapor led to enhanced optical modulation and charge capacity. At a wavelength of 550 nm the bleached state transmittance was 0.73 and the transmittance for the colored state was 0.28 and 0.15 for water partial pressures of p_H2O < 10⁻³ Pa and p_H2O ~ 7 × 10⁻² Pa, respectively. The charge densities were 14 and 25 mC/cm² for p_H2O < 10⁻³ Pa and p_H2O ~ 7 × 10⁻² Pa, respectively. The coloration efficiency was decreased with increased water partial pressure, from about 0.07 to 0.06 cm²/mC. Preliminary results show that the H₂O promotes an amorphous structure and makes the films increasingly hydrous.     

Structural and electrochromic properties of molybdenum doped vanadium pentoxide thin films by sol-gel and hydrothermal synthesis

Molybdenum-doped vanadium pentoxide (Mo-doped V₂O₅) thin films with doping levels of 3-10 mol% were prepared by dip-coating technique from a stable Mo-doped V₂O₅ sol synthesized by sol-gel and hydrothermal reaction. The Mo-doped V₂O₅ films had a layered V₂O₅ matrix structure along c-axis orientation with Mo⁶⁺ as substitutes. Values of the inserted and extracted charge density of 21.4 and 21.3 mC·cm^− 2 and the transmittance variation (ΔT at 640 nm) between anodic (+ 1.0 V) and cathodic (− 1.0 V) colored states of 41% were observed for the films with 5 mol% Mo⁶⁺ doping. Above this dopant concentration, the charge capacity and ΔT decreased. The enhancement of the electrochemical and electrochromic properties of the films is related to changes in the electronic properties of V₂O₅ films due to the creation of energy levels in the band gap of V₂O₅ by the Mo doping, accompanied by the reduction of the forbidden-band width and the increase of the conductivity.     

Electrochromic performance of PECVD-synthesized WOxCy thin films on flexible PET/ITO substrates for flexible electrochromic devices

Electrochromic performance of WO_xC_y films deposited onto 60 Ω/□ flexible PET (polyethylene terephthalate)/ITO (indium tin oxide) substrates by low temperature plasma-enhanced chemical vapor deposition (PECVD) was investigated. It was proven that extraordinary electrochromic performance was provided when the precursor [tungsten carbonyl, W(CO)₆; TC] vapor, carried by argon gas, was mixed with air gas and synthesized by radio frequency (r.f.) power at room temperature (23 °C). Cyclic voltammetry switching measurements found that only low driving voltages from − 1 V to 1 V were needed to provide reversible Li⁺ ion intercalation and de-intercalation. The light modulation with up to 63.6% of transmittance variation at a wavelength of 650 nm was obtained for 150 cycles of Li⁺ intercalation and de-intercalation in a 0.1 M LiClO₄-PC (propylene carbonate) electrolyte.     

Properties, performance and current status of the laminated electrochromic glass of Gesimat

In the last 10 years Gesimat has developed a large-area electrochromic glazing with an advanced polymer electrolyte and tungsten oxide and Prussian Blue as complementary electrochromic layers. This electrochromic glass has a switching range between 75% and 8% visible transmittance and between 56% and 6% solar transmittance. The polymer electrolyte is based on polyvinyl butyral (PVB), a polymer in use as an interlayer for laminated safety glass since more than 60 years. The electrochromic films are deposited by a new large-area electrodeposition process. For lamination the standard methods of laminated safety glass production can be used.     

Sprayed CeO2 thin films for electrochromic applications

Cerium dioxide (CeO₂) thin films were prepared by spray pyrolysis using hydrated cerium chloride (CeCl₃·7H₂O) as source compound. The films prepared at substrate temperatures below 300°C were amorphous, while those prepared at optimal conditions (T_s=500°C,s=5 ml/min) were polycrystalline, cubic in structure, preferentially oriented along the (2 0 0) direction and exhibited a transmittance value greater than 80% in the visible range. The cyclic voltammetry study showed that films of CeO₂ deposited on ITO pre-coated glass substrates were capable of charge insertion/extraction when immersed in an electrolyte of propylene carbonate with 1 M LiClO₄.These films also remained fully transparent after Li+ intercalation/deintercalation.     

Sol–gel derived nanocrystalline TiO2 thin films: A promising candidate for self-cleaning smart window applications

In the present work, anatase TiO₂ films are prepared by sol–gel spin coating method. The structural and optical properties of the films have been studied at different post-annealing temperatures. The photocatalytic activity and electrochromic performance of the films are investigated. The films annealed at 400 °C exhibit the highest photocatalytic activity with a rate constant of 4.56×10⁻³ min⁻¹. The electrochromic performance for the films annealed at 400 °C expressed in terms of difference in optical density (ΔOD) at 550 nm between coloured and bleached state is 0.5493. This combination of photocatalysis and electrochromism makes the sol–gel derived titania thin films as promising candidates for self-cleaning smart window applications.     

电致变色材料及应用

电致变色材料在大面积信息显示、无功耗贮存及灵巧调光窗口的应用领域，具有良好的前景。本文介绍了电致变色现象及其特点，并对变色机理、材料与器件的制备，以及应用等方面的研究状况作了评述。     

Preparation and properties of electrochromic tungsten oxide film

Tungsten oxide films have been formed by poly-complex. The dip-coating solution was prepared by adding hydrogen peroxide to a tungsten acid solution which was obtained from ion exchange. Amorphous and crystalline films can be obtained at different firing temperature. Optical and electrochemical measurements of these films have been carried out. The XRD, IR, TG-DTA analysis and SEM morphologies observation are also described. The results show that these coatings have good electrochromic properties.