A novel technique to prepare LiNbO3 at low temperature

Fresh niobium hydroxide was first precipitated from NbF₅ solution using an aqueous ammonium hydroxide under basic conditions. Then a simple procedure of mixing lithium and niobium hydroxides together and heating at a low temperature (400 °C) produced pure ultrafine single phase LiNbO₃ (LN). In the literature, this is the lowest temperature so far reported on the formation of LN. The phase content and lattice parameters are determined by X-ray diffraction (XRD). The average particle size and morphology were studied by transmission electron microscopy (TEM).     

2D Image Construction from Low Resolution Response of a New Non‐invasive Measurement for Medical Application

This paper presents an application of digital signal processing to data acquired by the radio imaging method (RIM) that was adopted to measure moisture distribution inside the human body. RIM was originally developed for the mining industry; we are applying the method to a biomedical measurement because of its simplicity, economy, and safety. When a two‐dimensional image was constructed from the measured data, the method provided insufficient resolution because the wavelength of the measurement medium, a weak electromagnetic wave in a VHF band, was longer than human tissues. We built and measured a phantom, a model simulating the human body, consisting of two water tanks representing large internal organs. A digital equalizer was applied to the measured values as a weight function, and images were reconstructed that corresponded to the original shape of the two water tanks. As a result, a two‐dimensional image containing two individual peaks corresponding to the original two small water tanks was constructed. The result suggests the method was applicable to biomedical measurement by the assistance of digital signal processing. This technique may be applicable to home‐based medical care and other situations in which safety, simplicity, and economy are important.     

辐射剂量对环氧树脂电子束固化行为的影响

分析了电子束剂量对环氧树脂体系辐射固化行为的影响规律。研究结果表明，电子束辐射过程中，温度由树脂辐射体系表面向内部逐渐降低，随着辐射剂量提高，树脂体系温度上升，辐射表面与内部的温度梯度加大，高辐射剂量下的温度变化缓慢。树脂辐射固化层厚度以及在相同厚度的固化程度均随辐射剂量增加，但增幅逐渐变小，树脂辐射固化度沿固化深度会加速下降。     

Plastic deformation of bcc metal thin foils without dislocation

Heavy plastic deformation of fcc metal thin foils to fracture has been found recently to proceed without involving dislocations, and it results in the formation of high density of vacancy clusters. Thin foil specimens of bcc metals such as V and Mo were plastically deformed to fracture in in situ elongation experiments under an electron microscope. Morphology of thinning and fracture was found to be similar to fcc metals, and no dislocation was observed during heavy deformation. Electron diffraction analysis at the tip of a crack during deformation confirmed a large elastic deformation of up to 5%. Unlike in fcc metal thin foil specimens, point defect clusters were not observed near fractured tips. This difference is attributed to the difference in vacancy reaction, though the deformation in bcc metals without dislocation most likely does produce vacancies.     

填充等离子体波纹波导色散曲线计算软件的设计

从一种正弦波纹波导慢波结构的色散方程理论推导出发,设计了在不同结构参数、有无电子注以及填充不同等离子体浓度的情况下,计算其色散曲线的专用软件.该软件除了具有传统的数值计算功能外,提供了一个较为友好的图形用户界面.该界面直接显示该波纹波导的结构图,同时用户可以通过该界面很方便地修改各主要参数,比较不同情况下得到的色散曲线,以获得优化的参数选择.     

高能 X 射线工业 CT 技术的研究进展

目的 研究分析了国内外高能X射线工业CT技术的进展情况，方法 通过有关文献资料，对目前国际上主要的高能X射线工业CT技术及设备进行评述。结果和结论 对美国、德国等发达国家的高能X射线工业CT设备、线阵探测器、面陈探测器及重建算法进行了分析。     

多丝正比室中电子的最大漂移时间

多丝正比室中电子的最大漂移时间是逃逸门电路中的一个重要参数。这个参数的选择将影响逃逸门工作方式的多丝正比室的整体性能。通过实验测量得到了多丝正比室中电子的最大漂移时间的实际值和最大漂移时间随多丝正比室工作状态的变化，测量结果在实际中得到应用。     

国际微电子专用关键设备的现状和发展趋势（考察报告）

讲述了参观Ｓｅｍｉｃｏｎ／ｗｅｓｔ９４′展览会及考察美国和西德的５个公司、１所大学所了解到的投影光刻技术、电子束曝光技术、透镜面形测试技术的发展。     

CT9800机器操作使用经验介绍

本文重点介绍了在进行CT断层X-线摄影时,如何灵活应用标准、软组织和骨结构等三种重建图像的软件,既能显著缩短图像重建的时间,又不会遗漏病变的影像。     

木犀科植物花粉的扫描电镜研究

植物花粉的形态特征具有种属特异性。本文用扫描电子显微镜观察了木犀科(Oleaceae)的六属八种植物花粉的形态特征。结果表明,除迎春有个别四萌发沟外,其它花粉都是三沟型,外壁纹饰均为网状。但各种植物花粉的细微形态仍有明显差异。因此,用扫描电镜观察研究植物花粉的亚微形态特征,可为植物分类提供一些必要的形态依据。