RFID技术在智能交通管理中应用

本文主要介绍RFDI技术定义及系统工作原理,并重点关注RFID技术在智能交通领域的实际应用方式。同时RFID技术也成功解决了车辆自动识别和信息采集问题,为智能交通管理和服务系统的建立提供了强大的信息支撑和保障。     

利用Applet制作电子相册

本文通过介绍Applet的体系结构和其生命周期以及如何创建和执行Applet程序,介绍了电子相册的制作过程。     

Corrosion behaviour of Ni-Zr-Ti-Si-Sn amorphous plasma spray coating

Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ amorphous material was deposited by a vacuum plasma spraying technique onto steel and copper substrates in order to investigate their behaviour in a corrosive environment. For comparison, the same alloy was prepared as amorphous ribbons by melt spinning. The amorphous nature of the coatings and ribbons was characterized by XRD, DSC and TEM, while XPS and AES analyses were performed to understand the origin of passivation and mode of corrosion. The corrosion behaviour of the coating was studied in H₂SO₄ and HCl solutions open to air at room temperature. Potentiodynamic polarisation and galvanic coupling tests were carried out on the substrate and the coating. It was found that the formation of Zr-, Ti- and Si-rich passive oxide layers provide a high corrosion resistance in H₂SO₄ solution while the breakdown of the passive layer by chloride ion adsorption was responsible for pitting corrosion of the Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ amorphous ribbons in HCl solution. Galvanic corrosion was the dominant corrosion mechanism for the coating/copper hybrid structure, in contrast to the Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ amorphous coating, which efficiently protected the steel substrate in the corrosive environment.     

面向工业平稳/非平稳复杂系统的在线故障监测技术

针对复杂系统中关键性能指标（KPI）相关故障检测方法检测精度低的问题,提出基于双层改进潜结构投影（DL-IPLS）的KPI相关故障检测方法. 利用协整分析和主元分析建立底层模型,对非平稳和平稳变量进行特征提取. 将提取的信息进行融合,建立改进潜结构投影的上层模型,根据融合信息对KPI的贡献进行空间分解. 在2个正交子空间中设计统计量,实现KPI相关故障的在线监测. 田纳西-伊斯曼过程和青霉素发酵过程的仿真结果表明,在面向工业平稳和非平稳复杂工业系统检测时,所提方法有效提高了KPI相关故障的检测率,降低了KPI无关故障的误报率.     

Excellent Polyimide Dielectrics Containing Conjugated ACAT for High-Temperature Polymer Film Capacitor

In order to meet the requirements of polymer dielectric materials for high thermal stability and excellent dielectric properties in the application of high-temperature film capacitors, a series of polyimide (PI) films are fabricated by introducing a self-synthesized aniline trimer (ACAT) with a conjugated structure in this work. Since the conjugated ACAT in the main chains of PI improves the electron polarization and carrier mobility of the PI molecular chains, the dielectric constant of the ACAT-PI films is greatly enhanced (4.4–7.4). Meanwhile, the dissipation factor does not increase apparently (0.002–0.013). The dielectric properties are stable even when the temperature is up to 200 °C, the thermal degradation temperature is as high as 450 °C, and the mechanical properties are also excellent (70–105 MPa). Among all the films, the PI film with 5 mol% ACAT exhibits the maximal energy density of 3.6 J cm⁻³ under the field of 426 kV mm⁻¹, the high tensile strength (90 MPa) and the excellent thermal stability (T_d5 = 515 °C). The work paves the way to prepare high-temperature polymer dielectric film materials with high energy storage density.     

Fe3Al氢脆机理的研究

用余氏理论计算了氢对Ｆｅ３Ａｌ金属间化合物键结构、键能和电子分布的影响，分析发现，Ｆｅ３Ａｌ的氢脆是由于氢原子溶入扣引起Ｆｅ，Ａｌ原子状态变化。使晶体内晶格电子数大大减少，导致晶体局域金属性减弱，并构成具有严重各向异性的键络的结果。同时得出，氢在Ｆｅ３Ａｌ中占据间隙位置。     

Ti5Nb人工钉扎中心NbTi超导体的磁通钉扎机制分析

采用棒基组合的装配方法，用热挤压和冷加工相结合的工艺制备了岛状Ti5Nb人工钉扎中心NbTi超导体，其中Ti5Nb体积含量为10％。通过对此超导体进行详细的磁通钉扎机制分析，认为样品的磁通钉扎力特征主要由正常相钉扎和Δκ扎相结合的机制决定。根据分析的结果，采用多源标度方法，很好地拟合了不同线径样品的磁通钉扎力密度随磁场变化的曲线。拟合的结果表明：样品在较低场下的性能主要由正常相钉扎机制决定，而在较高场下的性能主要由Δκ钉扎机制决定。并且随着线径的减小，正常相钉扎力密度和Δκ钉扎力密度均有不同程度的提高。     

Simulation studies on the fuel electrode of a H2---O2 polymer electrolyte fuel cell

The macro-homogeneous porous electrode theory is used to develop a model which describes the catalyst layer of the hydrogen electrode formed by catalyst particles that are bonded to the membrane. The water transport in the catalyst layer and polymer electrolyte membrane is considered. The effects of catalyst layer structure parameters such as polymer volume fraction, catalyst layer thickness, platinum loading and reactant gas humidity as well as CO poison on the hydrogen electrode behavior are examined. The results show that the catalyst layer thickness has a significant effect on the electrode performance. A thicker catalyst layer will result in a larger ohmic voltage loss and higher catalyst cost. The optimal polymer volume fraction and catalyst layer thickness are 0.5 and 1.5–4 μm, respectively, for this electrode. An optimal platinum surface coverage on carbon need not exceed 20% (20 wt% Pt/C). Larger platinum coverage will increase the cost, but only slightly enhance the electrode performance.     

电子陶瓷材料研究的一些新进展

随着电子科学技术的发展，用作电子材料的陶瓷的研究和开发十分引人注目，许多工厂和科研人员正在研究开发电子陶瓷新材料、新工艺和新器件，以满足电子科学技术的发展对高性能陶瓷材料的要求。本文简要介绍了电子陶瓷系统中绝缘体、介电质、压电体及铁电薄膜材料及其制备工艺和应用方面的一些新进展。     

Squaring down of general MIMO systems to invertible uniform rank systems via pre- and/or post-compensators

Pre- and/or post-compensators are designed to square down a general MIMO system to a uniform rank system, the structure of which is almost similar to a SISO system. The method of squaring down either does not change the finite zero structure of the given MIMO system or simply adds additional finite zeros in the left half s-plane. The significance of such a squaring down lies in the simplicity of the structure of a uniform rank system lending itself for easy analysis and control design.