Pb2+ binding by polyaspartyl polymers and their application to Pb2+ removal from glycyrrhizin

Polyaspartate is an excellent Pb²⁺‐binding agent in comparison with some polyaspartamide derivatives with different side chains, in that it possesses a higher Pb²⁺ uptake and a lower Pb²⁺ equilibrium concentration. Equilibrium sorption data for Pb²⁺ on polyaspartate can be well fitted with the Freundlich and Langmuir models. Experimental results show that a crosslinked polyaspartate hydrogel is superior to poly(acrylic acid)‐based resins and polystyrene‐based chelating resins. IR spectra and X‐ray photoelectron spectra reveal that the polyaspartate hydrogel binds Pb²⁺ by both an ion‐exchange mechanism and a chelating mechanism. The polyaspartate hydrogel is also an effective agent for the removal of Pb²⁺ from glycyrrhizin. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2215–2220, 2005     

乳液聚合导致一种新的转相过程

借助电导率仪、光学显微镜和亚微粒子分析仪等测试手段。研究了乳液聚合导致一种新的转相过程,并用于八甲基环四硅氧烷的聚合中。研究表明:体系以 W/O 相态开始,单体由连续相向水相(分散相)内的胶束中扩散并发生聚合反应,形成 O/W/O 复合乳液。反应过程中连续相体积不断减小,分散相(O/W 复相)体积不断增大,当达到某一临界相比时,体系发生转相,转相后乳液为 O/W。对本实验物系,转相点临界相比主要由初始水油比和乳化剂浓度决定。同常规的乳液聚合相比,伴有转相现象的乳液聚合有其自身的特点,转相使得聚合速率、聚合物粒径及分布、乳液稳定性等发生变化。     

离子取代凝胶——ACA离子取代动力学模型

用动边界模型描述了海藻酸-壳聚糖-海藻酸(ACA)离子取代凝胶对2价离子的取代动力学过程.模型具有较好的可靠性，ACA离子取代凝胶对2价离子的取代属于颗粒扩散控制.ACA离子取代凝胶对Pb²⁺的反应级数是0.76.     

Gel formation in diimide‐hydrogenated polymers

The hydrogenation of diene‐based polymers via diimide is a very attractive alternative to the conventional catalytic hydrogenation route based on gaseous molecular hydrogen. However, serious crosslinking always accompanies it and limits the end‐use properties of the polymers. Gel formation in polymers that are hydrogenated via diimide has been investigated in detail through an inspection of all the chemical reactions involved in the process. The results indicate that hydrogen peroxide decomposition, some reactions related to oxygen, and the redox reaction between hydrogen peroxide and hydrazine are capable of generating radicals. However, radicals generated in the aqueous phase do not appear to initiate the crosslinking of diene‐based polymers in the latex form. It is proposed that the primary radicals giving rise to crosslinking are generated in the polymer phase in situ, and the step responsible for generating these organic radicals is possibly the diimide disproportionation reaction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1122–1125, 2005     

Investigation into the effect of carboxylic acid monomer on particle nucleation and growth in emulsifier-free emulsion copolymerization of styrene-butadiene-acrylic acid

Latexes of carboxylated styrene-butadiene rubber were prepared via batch emulsion copolymerization with different amounts of acrylic acid in the absence of emulsifier. The effect of acid monomer was investigated in the particle formation and growth. It was observed that the amount of acrylic acid strongly affected the particle formation. The number of particles and thus polymerization rate increased with increasing of the acid content. There was no significant difference in the polymerization rate per particle in all experiments. The results show that in this case particle growth process is less dependent on the acrylic acid amount in comparison with its influence on nucleation stage and then particle number. Several parameters such as polymerization rate and number of latex particle per unit volume of the aqueous phase were calculated. Attempt was made to evaluate the average number of growing chain per particle. Also average particle diameter of the above carboxylated SBR latexes was obtained through some calculations from the direct measurement of average particle diameter in the swollen state by light scattering technique for the first time.     

Electron beam irradiation of ethylene‐propylene terpolymer: Evaluation of trimethylol propane trimethacrylate as a crosslink promoter

The effect of electron beam irradiation on ethylene‐propylene terpolymer (EPDM) was investigated. A 50‐part oil‐extended EPDM with high termonomer (ENB) content (iodine number of base polymer) 19, was selected for this study. An increase in irradiation dose from 0 to 200 kGy resulted in increased crosslinking, measured by an increase in gel contents and better swelling resistance. The effect of the multifunctional monomer trimethylol propane trimethacrylate (TMPTMA) as a crosslink promoter was studied using IR spectroscopy. The IR studies revealed enhanced peak absorbances at 1725, 1257, and 1023 cm^?1 as a result of the increased concentration of C = O and C‐O‐C groups and reduced absorbance at 1630 cm^?1 due decreased concentration of C = C groups with TMPTMA level in the irradiated samples. The presence of TMPTMA increased the level of crosslinking at a given irradiation dose, which was manifested by improvement in tensile properties. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 968–975, 2005     

Determination of trace manganese and Ni in neem oil by ETA-AAS with emulsion sample introduction

An emulsion-based method was developed as an alternative for the introduction of oil-based samples into a graphite furnace to produce a more rapid, precise, and accurate method of analysis. The combination of emulsion sampling and electrothermal atomization for atomic absorption spectroscopy was developed and then applied to the determination of Ni and manganese in neem oil from Venezuela. The optimal concentration of neem oil in the emulsion was 30 and 4% for Ni and Mn, respectively, based on the metal concentration of the neem oil. The stability of the emulsion as a function of time was evaluated. The use of aqueous calibration solutions and the accuracy attained using this method make it attractive for the analysis of oil samples. The metal recovery was between 97 and 101%. Based on the emulsion method, the neem oil samples had 1.39 and 0.21 mg of Mn and Ni per kg of oil, respectively. The wet digestion method indicated a Mn and Ni concentration in the neem oil sample of 1.42 and 0.24 mg/kg, respectively.     

Dynamic Mechanical Properties and Adhesive Strengths of Emulsion Polymer by Power Feed Technique, I

Dynamic mechanical properties and adhesive strengths of power feed copolymer and random copolymer synthesized using styrene or methyl methacrylate and n-butyl acrylate were investigated. Although the two systems were synthesized from the same raw materials, power feed copolymer had a very broad transition compared with random copolymer. This fact was explained by the fact that the system synthesized through power feed method was an alloy of copolymers which are a continuous series from monomer A rich copolymers to monomer B rich copolymers. The dynamic mechanical behavior of film cast from solution was almost the same as that of emulsion film, which indicated more extensive application of power feed copolymer. In the P(nBA/St) system, power feed copolymer maintained its adhesive strengths over a wide temperature range compared with random copolymer. The absolute value, however, was not so high. This was due to the low cohesive strengths of the films.     

核壳型乳液聚合研究进展

综述了近年来核/壳结构聚合物乳液的聚合工艺、性能及核/壳结构的表征方法进行,讨论了影响核/壳结构聚合物乳胶粒子形态的各种因素。     

Volume phase transition of polyelectrolyte gels in dimethyl sulfoxide/ tetrahydrofuran mixtures

Copolymer gels were prepared from 2-(acrylamido)-2-methylpropanesulfonic acid (AMPS), N,N-dimethylacrylamide (DMAA, comonomer) and N,N′-methylenebis(acrylamide) (BIS). The mole fraction of AMPS were 0.2674 and 0.4318, respectively, with the same BIS mole fraction of 0.013. These gels with counterions H⁺, Na⁺, and K⁺ were swollen at 25°C in mixtures of dimethyl sulfoxide (DMSO) and tetrahydrofuran (THF). A volume phase transition was observed at the THF volume fraction of about 0.58, indicating that the volume phase transition in a polyelectrolyte gel occurs when the medium polarity decreases sufficiently for ion-pair formation. On changing the counterion, the fraction of DMSO in the solvent mixture which is required to initiate swelling decreases in the order Na⁺, H⁺, and K⁺, the same as for counterion condensation in identical gels.