高效节能换热器在氮肥工业中的应用

描述了新型折流杆换热器的强化传热和降低壳层压力降的原理 ,它与传统折流板换热器相比 ,传热效率高 ,材料及能耗小。介绍了这种新型换热器在合成氨变换工段和尿素装置中的应用情况及所起的节能降耗作用 ,指出该高效节能换热器在设计和生产中的关键技术。     

间歇窑窑墙温度场图形仿真研究

本文利用有限差分法求解间歇窑窑墙中的温度分布，并用Ｃ语言设计了窑墙温度场图形仿真软件。输入窑墙厚度和材料的物性参数等，系统可进行窑墙温度场分布的实时仿真及窑炉结构与操作的优化     

An analytical tuning approach to multivariable model predictive controllers

Multivariable model predictive control is a widely used advanced process control methodology, where handling delays and constraints are its key features. However, successful implementation of model predictive control requires an appropriate tuning of the controller parameters. This paper proposes an analytical tuning approach to multivariable model predictive controllers. The considered multivariable plants are square and consist of first-order plus dead time transfer functions. Most of the existing model predictive control tuning methods are based on trial and error or numerical approaches. In the case of no active constraints, closed loop transfer function matrices are derived and decoupling conditions are addressed. For control horizon of one, analytical tuning equations and achievable performances are obtained. Finally, simulation results are used to verify the effectiveness of the proposed tuning strategy.     

不同煅烧温度下形成的含氟硫A矿对水泥水化性能的影响

为研究不同煅烧温度下，含氟硫熟料中不同性能、形貌特征的A矿与水泥水化形成钙矾石的关系以及A矿对水泥水化性能的影响，采用工业原料并尽量模拟立窑内煅烧状况，对经1350℃和1425℃温度下煅烧的熟料进行了A矿形貌、A矿水化率及A矿与钙矾石形成关系等系列试验。试验结果表明，在传统的煅烧温度下（1400～l425℃）烧成的熟料．其A矿的固溶程度及A矿含量均比低温（1350℃）烧成的高；掺氟硫复合矿化剂烧制的熟料的A矿具有较高的水化速度，熟料强度较高．其制成的水泥在水化时，液相成分受高固溶程度A矿的水化所控制，所形成的钙矾石较低温煅烧的稳定．且A矿水化产物的形成与钙矾石（AFt）的形成较协调，水泥石机械强度更高。     

Polynomial time approximation algorithms for proportionate open‐shop scheduling

This paper deals with the presentation of polynomial time (approximation) algorithms for a variant of open‐shop scheduling, where the processing times are only machine‐dependent. This variant of scheduling is called proportionate scheduling and its applications are used in many real‐world environments. This paper develops three polynomial time algorithms for the problem. First, we present a polynomial time algorithm that solves the problem optimally if , where n and m denote the numbers of jobs and machines, respectively. If, on the other hand, , we develop a polynomial time approximation algorithm with a worst‐case performance ratio of that improves the bound existing for general open‐shops. Next, in the case of , we take into account the problem under consideration as a master problem and convert it into a simpler secondary approximation problem. Furthermore, we formulate both the master and secondary problems, and compare their complexity sizes. We finally present another polynomial time algorithm that provides optimal solution for a special case of the problem where .     

Velocity measurements and flow field characteristic analyses in a turbo air classifier

Turbo air classifier is one of the most widely used powder classification equipment. The rotor cage as a rotary component can create a forced centrifugal field, so it is a key part for turbo air classifier. In order to investigate the effect of structural variations of the rotor cage on flow field characteristics, three dimensional velocity measurements of the annular region in a turbo air classifier equipped with two different rotor cage bottom plates (A and B type) are performed by laser Doppler velocimeter (LDV). It is found that the different bottom plates have different axial and tangential velocity distributions in the annular region. However, the structural variations of the rotor cage have hardly any effect on the radial velocity. Based on the classification principle, the relation between the classification performance and the flow field characteristics is investigated in great detail.The results of the flow field measurements were tested by the classification experiments carried out with cement raw meal and ground calcium carbonate. The results demonstrate that B type bottom plate can realize the production of narrow particle size distributions, so it is more favorable for classification than A type bottom plate. Classification experiment results are in good agreement with the results of the flow field measurements.     

经孔板形成旋转流的管壳式换热器壳程传热及流阻的研究

对螺旋折流孔板管壳式换热器壳程的传热与流体阻力做了研究 ,给出换热器壳程传热与流阻的计算关联式 ,并采用实验模型对换热器壳程流体旋转流的阻力系数与传热管的局部传热系数做了测试 ,且对光滑和菱形翅片两种管型作了对比     

视觉传感网中基于二次规划的图像压缩感知

为降低视觉传感网络中图像压缩感知算法的计算复杂度,提出一种基于二次规划的网络图像恢复算法。该算法将压缩感知重构中的欠定线性方程组求解问题,转化为有界约束二次规划问题,在此基础上结合阿米霍步长准则,设计一种压缩感知图像恢复算法,通过求解二次规划问题对网络图像数据进行恢复。理论分析和仿真结果表明,与传统图像压缩感知算法相比,该算法可减少约1/3的图像数据恢复运算时间,且图像重构质量提高3 dB~6 dB,有效提高了视觉传感器网络图像恢复算法的实时性。     

视线交互中两类扫视运动的人机工效评估研究

Fitts法则是人机交互领域预测人机工效的一个有效模型,在许多交互方式中都得到了验证,是传统人机工效研究的理论基础。然而在视线交互中,由于眼动肌肉神经控制机制与肢体运动不同,Fitts法则并不适用。近两年的相关研究提出了一个新的专门针对视线点击任务的难度指数IDeye,它比经典的Fitts指数更能准确预测视线交互的工效。然而,在新模型的有效性验证实验中并没有考虑两种典型的扫视运动(向心和离心运动)的差异。为此,在前期研究的基础上设计组织实验,验证了视线交互中离心和向心这两种眼球运动所带来的人机工效和稳定性的差异,并证实新的IDeye模型仍然能有效预测单纯的离心或向心扫视条件下的人机工效,是对视线交互工效研究的重要补充。