Methodologies for characterizing traffic in wide area networks: Analysis and benchmarking

Since computer networks play an important role in distributed computing environments, an application's performance depends heavily on the quality of service provided by the communication networks. To ensure a high performance, the characteristics of wide area networks, WANs, must be well understood. This paper presents methodologies to characterize WAN traffic based on real measurements from Bellcore's backbone network that connects remote sites using dedicated T1 links. This paper also suggests some workload models that can be used for wide area network sizing and performance evaluation studies. It is found that the inter-site traffic pattern depends on the time of the day and the day of the week. Furthermore, the traffic between two sites is found to be reasonably symmetric, except for those sites designated as back-up sites. The coefficient of variation is used as a measure for the traffic burstiness and it is found to be 1·5 degree during working hours. The methods presented here are easy to use and cost-effective.     

Evaluating the design of flexible manufacturing systems

Evaluating the design of flexible manufacturing systems is complex. Developing a measure of performance useful for evaluating alternate designs continues to be interesting. Here, total productivity of the system is proposed as an appropriate measure. Specification of parameters based upon strategic considerations for this measure are discussed. Finally, the usefulness of the measure is demonstrated through an example.     

纳米β-Ni(OH)2与球型Ni(OH)2的热性能比较研究

用配位沉淀法合成出纳米级Ni（OH）2，并对其进行XRD，TEM，DSC分析，分析结果表明，所得纳米β-Ni（OH）2为可用作电极材料的β-Ni（OH）2，粒径为30－40nm，且热分解温度比普通球镍低10℃左右，摩尔分解热比普通球镍低4－7kJ，从理论上分析了产生此现象的原因。     

随机模拟在电信网性能评价中的应用

本文介绍了可在微机上实现大规模电信网践模拟的实用化软件ＳＩＭＵＮＥＴ，及基所采用的无时钟事件追踪法。该软件可用规划中的电信网络和实际网路的模拟及性能评价，也可用于不同流量控制算法的评价。文中给出一个评价实例。     

T_C≥400°C高温PTC陶瓷的研制

利用国产原料，采用传统的陶瓷材料制备工艺，研制了居里温度ＴＣ≥４００°Ｃ的高温ＰＴＣ陶瓷，制成了居里温度ＴＣ＝４１２°Ｃ，电阻Ｒ≤１０３Ω，ｌｇ（Ｒｍａｘ／Ｒｍｉｎ）＝４的高性能ＰＴＣ热敏陶瓷材料     

Performance of absorption refrigeration cycle at maximum cooling rate

The influence of irreversibility of finite-rate heat transfer on the performance of an absorption refrigerator is investigated using an endoreversible cycle model with continuous flow. The cooling rate is adopted as an objective function for refrigerator optimization. The maximum cooling rate and the corresponding coefficient of performance are derived. The optimal performance with respect to heat transfer areas of the refrigerator is analysed. In addition, certain significant conclusions are reached.     

三维定量储层地质模型与参数动态预测方法

提出了三维定量储层地质模型及其参数动态预测方法，用该方法可预测储层开采状态，水淹区及剩余油区分布和各剩余油区的可采储量，三维定量储层地质模型的预测图件可为合理开采提供依据。     

凝析气井井筒动态预测方法

利用垂直管流公式,结合流体相平衡热力学闪蒸计算,运用状态方程模拟,给出凝析气井井筒动态预测新方法.根据该方法.结合油藏数值模拟计算的结果,可准确地预测不同生产时期凝析气井的井筒动态.     

Eight-year exploration of shrinkage in high-performance concrete

In this paper, an experimental and analytical exploration on the effect of water-binder ratio (w/b), silica fume and age on autogenous, carbonation, drying and total shrinkage of high-performance concrete (HPC) is outlined. Eight types of HPC were studied. Carbonation, internal relative humidity (RH) and strength were studied on specimens from the same batch of HPC that was used in the studies of shrinkage. The results indicate fairly good correlation between carbonation, shrinkage, w/b and RH. The type and amount of silica fume affected shrinkage.     

国外模拟IC的发展现状分析

本文主要根据电子整机的发展要求,从集成化、高性能和高可靠等三方面分析国外模似IC的发展,进而说明模拟IC总的发展趋势及其表现。最后指出,模拟IC正面临一个新的变革时期。