A disposable single-use electrochemical sensor for the detection of uric acid in human whole blood

We report here a non-enzymatic detecting electrode strip for fast monitoring of uric acid in human whole blood. A single-use amperometric uric acid sensor strip, incorporating a three-electrode configuration, has been fabricated on a polypropylene substrate using low cost screen-printing (thick-film) technology. Both the working and counter electrodes were prepared by screen-printing commercial carbon ink. The integration on the same support of pseudo-reference electrode was obtained by screen-printing a commercial silver ink and subsequent electrochemical pretreatment. Simply by placing a 20 μl human whole blood drop on the strip is enough for uric acid analysis by square-wave voltammetry. Real human whole blood samples were analyzed by this method and compared to the phosphotungstic acid clinical test procedure with satisfactory results.     

新型聚丙烯酸(934P、980)树脂的制备

详细研究了以乙酸乙酯和环己烷为溶剂，丙烯酸为单体，BPO，LPO，AIBN为引发剂，聚烯基多醚为交联剂，合成增稠能力强、透明度高的聚丙烯酸树脂。于混和溶剂存在下制得的聚合物，消除了以往由二氯甲烷为溶剂的反应介质中所得产品的毒性，可广泛应用于医药及日用化工等行业。     

Methacrylic acid–acrylamide-g-poly(ethyleneterephthalate) fibres for urea hydrolysis

This paper presents the results of urease immobilization onto methacrylic acid–acrylamide grafted poly(ethyleneterephthalate) fibres. The graft yield strongly affected the maximum activity of the immobilized enzyme up to a value of 70·2%. Higher grafting caused a decline in urease activity and led to the degradation of the fibres. The minor changes observed in K_m and V_max demonstrated that the conformational changes existed during immobilization were not extensive. However, 70·2% methacrylic acid–acrylamide-g-fibres containing urease were more stable towards acidic and alkaline pH, high temperature and storage conditions compared with free enzyme. Apart from the increase in stability to heat inactivation, the initial enzymatic activity of the urease–fibre system remained almost unchanged even after 40 repeated assays corresponding to 10 h of operation in 4 months, indicating the excellent durability of the system.     

葡萄糖电解氧化还原工艺研究

采用自制的无膜电解槽，对同时电解氧化还原葡萄糖生成葡萄糖酸和山梨醇的工艺进行了研究。所得到的最佳工艺条件为：葡萄糖浓度０．４ｍｏｌ／Ｌ，ｐＨ值１１，电流密度３Ａ／ｄｍ￣２。在此条件下电解１２ｈ，葡萄糖转化率可达９６．４％，葡萄糖酸产率８８％，山梨醇产率１０％。同时，考察了和Ｚｎ￣（２＋）加入以及ｐＨ值对电流效率的影响。     

水溶液中硅酸溶解和胶结的实验研究

本研究了几种不酸ＰＨ值对硅酸胶结的影响。结果表明，草酸浓度增大时，硅酸胶结速度变缓，至ＰＨ３－４时，硅酸不再胶结；而ＨＣＬ浓度增大，虽然胶结速度变缓，但最终仍胶结。     

In situ13C NMR study of tert-butanol interaction with moderately concentrated sulfuric acid

An in situ NMR study of tert-butanol dehydration in 95 and 85% sulfuric acid did not indicate the formation of tert-butyl cations as active reaction intermediates. Instead, only NMR lines from oxonium ions under the condition of fast exchange with water and the acid were observed. It is most likely that, in the concentrated acid, the active intermediates of this reaction are represented by tert-butyl sulfuric ester which probably is a precursor of invisible tert-butyl carbenium ions representing short-lived excited or transition states.     

Environmentally friendly, heterogeneous acid and base catalysis for the methylation of catechol: Chances for the control of chemo-selectivity

The properties of catalysts with (i) Brønsted-type acidity (H-mordenite and Al/P mixed oxide), (ii) Lewis-type acidity (Al trifluoride) or (iii) basic characteristics (Mg/Fe mixed oxide) were investigated in the gas-phase methylation of catechol. When methanol was used as the methylating agent, H-mordenite and AlF₃ gave high selectivities to guaiacol (the product of O-methylation) under mild reaction conditions, that is at very low catechol conversions. An increase in temperature led to the transformation of guaiacol to phenol and cresols, and to considerable catalyst deactivation. The basic catalyst Mg/Fe/O also favored an extensive degradation of guaiacol to phenol. On the mildly acidic catalyst Al/P mixed oxide a stable catalytic performance and a high selectivity to guaiacol at 40% catechol conversion were obtained. When methylformate, a more reactive methylating agent, was used with AlF₃ and Mg/Fe mixed oxide as catalysts, higher catechol conversions and slower deactivation rates could be achieved under mild reaction conditions, with a low extent of guaiacol degradation. However, methylformate rapidly decomposed when temperatures above 350 °C were used. Finally, tests were made by reacting catechol and diethoxymethane with acid catalysts, with the aim of synthesizing methylenedioxybenzene. The latter product was obtained with high selectivity, but with very low yield, due to both catalyst deactivation and decomposition of diethoxymethane.     

Trifluoromethanesulphonic acid catalysed transalkylation between tetrabromobisphenol-a and toluene for the production of 2,6-dibromophenol

The preparation of 2,6-dibromophenol is described. This compound, useful as raw material for brominated poly(phenyleneoxide) and pyrogallol or derived pharmaceuticals/pesticides, was prepared in 80% (isolated) yield by a transalkylation reaction between tetrabromobisphenol-A and toluene. The catalyst, trifluoromethanesulphonic acid, can be simply recovered and recycled. Perfluorinated resin sulphonic acid (NAFION-H®, DuPont) did not effectively catalyse this transalkylation.     

Direct Spectroscopic Determination of Europium(Ⅱ) Concentration During Europium(Ⅲ) Electro-Reduction in Hydrochloric Acid Medium

UV-Vis spectroscopy was used to directly determine the concentration of Eu(Ⅱ) during electroreduction of Eu(Ⅲ) in hydrochloric acid medium. Electroreduction was carried out in a flow type electrolyzer with glassy carbon cathode at the constant potential of -800 mV vs. Ag/AgCl. The effects of oxygen and concentration of hydrochloric acid on the system were investigated. For 0.01 mol·L-1 hydrochloric acid, calibration curves for Eu(Ⅱ) absorption bands at 248 and 320 nm were constructed. Molar absorption coefficients were estimated to be 2016 and 648 L·mol-1·cm-1, respectively. The absorbance strongly decreased with decrease in pH of the solution, whereas concentration of chloride had only a negligible effect.