Viscoelastic properties of polyarylene ether nitriles/thermotropic liquid crystalline polymer blend

Polyarylene ether nitriles (PEN)/thermotropic liquid crystalline polymer (TLCP) blend was prepared via melt mixing. The immiscible phase morphologies, linear and nonlinear, as well as transient viscoelastic properties of the blend were studied using SEM, rheometer, and DMA. The linear dynamic viscoelastic behavior of the blend shows temperature dependence due to further evolution of the immiscible morphology and, as a result, the principle of time‐temperature superposition (TTS) is invalid. In the steady shear flow, the discrete TLCP phase is difficult to be broken up because of the high viscosity ratio of the blend systems, while is easy to be coarsened and followed by elongation, and finally, to form fibrous morphology at high TLCP content and high shear level. During this morphological evolution process, the transient stress response presents step increase and nonzero residual relaxation behavior, leading to increase of the dynamic viscoelastic responses after steady preshear. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Semiflexible random thermotropic copolymers from 8‐(3‐hydroxy phenyl) octanoic acid and 3‐chloro‐4‐hydroxy benzoic acid/3,5‐dibromo‐4‐hydroxy benzoic acid

Two series of semiflexible random thermotropic copolymers containing 8‐(3‐hydroxy phenyl) octanoic acid (HPOA) with either 3‐chloro‐4‐hydroxy benzoic acid or 3,5‐dibromo‐4‐hydroxy benzoic acid were prepared by melt polycondensation techniques. The copolyesters were characterized with Fourier transform infrared spectroscopy, dilute solution viscometry, hot‐stage polarized light microscopy, differential scanning calorimetry, thermogravimetric analysis, and wide‐angle X‐ray diffraction. Studies revealed that the amount of HPOA as a disruptor incorporated into the backbone of substituted 4‐hydroxy benzoic acids had a detrimental effect on the liquid‐crystalline behavior. Mesophase‐transition temperatures were observed between 210 and 250°C, and the optical textures were of typical nematic phases. The degree of crystallinity decreased with an increase in the HPOA content. The thermal stability of the copolymers was in the range of 310–370°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

物质平衡法测油井液面

物质平衡法通过测试环空中的气体排量折算出真实的环空液面，可以克服双频道回声仪所遇到的困难，为分析泵效、折算地层压力及区块注水补充地层能量提供依据。中原油田采油二厂研制的拟液面测试仪既能用于有泡沫段的油井，又可用于无泡沫段的油井，对于井深超过2500m的油井更适宜。     

Magnetotransport Properties and Mechanism of the A-Site Ordering in the Nd–Ba Optimal-Doped Manganites

The crystal structure and magnetotransport properties of the Nd_0.70Ba_0.30-MnO_3.00−δ manganites have been investigated. The stoichiometric A-site ionic disordered Nd_0.70Ba_0.30MnO_3.00 sample is orthorhombic (SG=Imma) ferromagnet below T _C ≈151 K. It has metal-insulator transition at T _MI ≈140 K and peak of magnetoresistance ∼50% in field of 9 kOe. The anion-deficient partly A-site ionic ordered Nd_0.70Ba_0.30MnO_2.60 sample is ferrimagnet with T _N ≈130 K and has nanometric ∼440 nm grains. The oxygen annealed stoichiometric partly A-site ordered Nd_0.70Ba_0.30MnO_3.00 sample consists of two perovskite phases: (i) A-site ionic completely ordered tetragonal (SG=P4/mmm) NdBaMn_2.00O_6.00 with a Curie point of ∼310 K and (ii) superstoichiometric orthorhombic (SG=Pnma) NdMnO_3.00+γ with a Curie point of ∼120 K. The magnetoresistance of this sample at the room temperature is about 7% in a field of 9 kOe. Considerable changes of the magnetic properties are interpreted as due to the ordering of Nd³⁺ and Ba²⁺ cations as well as the formation of nanometric grains.      

Study of Liquid Phase Shifter for ICRF on EAST

A method of current drive with Ion Cyclotron Range of Frequency （ICRF） on Experimental Advanced Superconducting Tokomak （EAST） is described. A variety of liquid silicon oil heights in the phase shifter will bring the phase difference to the current drive. It is found that the current drive can be achieved by using the phase shifter. The liquid phase shifter is one of the impedance matching systems too.     

液碱纯度对阴床再生运行情况分析

从理论上分析了液碱对阴树脂再生度的影响。通过两种不同纯度的液碱再生阴树脂的实际运行经济指标统计分析，说明用高纯度液碱再生阴树脂，可提高树脂的工作交换容量和周期制水量，有很好的经济效益。     

Computations of Explosive Boiling in Microgravity

Dynamics of the explosive growth of a vapor bubble in microgravity is investigated by direct numerical simulation. A front tracking/finite difference technique is used to solve for the velocity and the temperature field in both phases and to account for inertia, viscosity, and surface deformation. The method is validated by comparison of the numerical results with the available analytical formulations such as the evaporation of a one-dimensional liquid/vapor interface, frequency of oscillations of capillary waves, and other numerical results. Evolution of a three-dimensional vapor nucleus during explosive boiling is followed and a fine scale structure similar to experimental results is observed. Two-dimensional simulations yield a similar qualitative instability growth.     

高压下CO在甲醇-碳酸二甲酯中的溶解度测定

利用自行建立的高压下测定气体在液体中溶解度的装置,在温度25~75℃、压力2.00~10.00MPa条件下,首次测定了CO在甲醇、碳酸二甲酯及甲醇-碳酸二甲酯混合体系中的溶解度,并用PR方程计算了CO的气相逸度,溶解度数据符合方程f=Hx。揭示了CO在甲醇、碳酸二甲酯及甲醇-碳酸二甲酯混合体系中的溶解度规律。将亨利系数和温度进行关联,关联误差很小。这表明用此关联式可预测和推算CO在这些溶剂中的溶解度。     

地面驱动螺杆泵恒液面控制方法

恒液面控制有利于提高泵效,降低抽油杆柱和泵等设备的失效率。为此结合地面控制装置,研究了一种控制方法和软件。该软件根据控制装置实时测量的转速、扭矩等参数并结合地层开采能力、杆泵型号等参数,分析计算出液面高度和控制范围,并计算出转速改变量,由控制装置实行闭环控制。经大庆油田5口井试验表明,液面高度误差均在50 m内,实现了螺杆泵恒液面控制目的。     

Density measurements on levitated liquid metal droplets

Electromagnetic levitation is a useful tool for measuring thermophysical properties of high-temperature melts such as liquid metals. Due to its noncontact nature, the undercooled regime is also accessible. Density and thermal expansion of a levitated drop can be derived from volume measurements, if its mass is known. Assuming cylindrical symmetry, the volume of a drop can be determined from its cross section. Using photography, such measurements on liquid metals have been performed in the past. Here we present an improvement of this method, which replaces the photographic camera with a CCD videocamera and subsequent digital image processing. This reduces the time effect required to obtain the results and allows one to average over disturbing surface oscillations. The specific problems of digital image processing, namely resolution and edge detection, are addressed and results on nickel are presented.Paper presented at the Fourth International Workshop on Subsecond Thermophysics, June 27–29, 1991, Köln, Germany.