热梯度CVI制备炭/炭复合材料及其研究进展

按预制件内部的温度分布不同，可以认为，均热法及热梯度法是化学气相沉积制备炭／炭复合材料的两种基本工艺。对于圆筒或圆盘形工件，热梯度CVI具有增密快，炭的有效利用率高，可实现工业规模化生产的优点，是一种很有前景的CVI工艺。本文介绍了热梯度CVI制备炭／炭复合材料的工艺原理、工艺特点及其最新研究进展。     

802.11 DCF协议引入信道预约机制的必要性分析

论文对802.11 DCF协议引入信道预约机制的必要性问题进行了探讨.通过分析信道预约机制与隐藏/暴露终端问题之间的关系,提出一种比较隐藏终端和暴露终端出现概率大小的等效方法,并给出了相应的数值估算结果.理论分析结果验证了802.11 DCF协议引入信道预约机制的有效性.     

基于μCOS-Ⅱ的蓝牙音频应用系统设计

论文介绍了一种基于μC/OSⅡ嵌入式操作系统的蓝牙音频应用系统设计.硬件方面,采用Andes N9处理器开发平台,蓝牙芯片采用RDA5876;软件方面,完成了μC/OS-Ⅱ操作系统在硬件平台上的移植,实现了蓝牙协议栈应用程序.     

Thermoplastic extrusion—the mechanism of the formation of extrudate structure and properties

Systems processed by thermoplastic extrusion can be regarded as heterophase polymer melts of incompatible water-plasticized biopolymers. In the process of thermoplastic extrusion, proteins and polysaccharides are melted at high pressure and temperature below the temperature region of their thermal decomposition. Dispersed particles of these systems can be deformed in flow. The mixed-melt anisotropic structure, formed in flow, is fixed by rapid conversion of the melt jet that lets the extruder die from a viscous state to a rubber-like state and then to a glassy state caused by cooling and drying. Incompatibility of proteins and polysaccharides in their water-plasticized melt mixtures impacts on structure formation and texturization during thermoplastic extrusion. Presented at the 20th ISF World Congress and 83rd AOCS Annual Meeting and Expo, May 10–14, 1992, Toronto, Ontario, Canada.     

Graft copolymerization of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid onto carboxymethylcellulose (sodium salt) by H2O2/Fe+2 redox pair

The effect of the reaction conditions on the grafting parameters during grafting of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid onto sodium carboxymethylcellulose using H₂O₂/Fe⁺² redox pair are studied at 30°C. The grafting ratio, add on, and conversion initially increase with the H₂O₂ concentration in the range of (10.0–15.0) × 10^?2 mol dm^?3. Thereafter, these parameters decrease with the H₂O₂ concentration. The grafting ratio, add on, and conversion increase when increasing the ferrous ion concentration from (0.5 to 4.0) × 10^?2 mol dm^?3 and decrease with a further increase in the concentration. It is observed that the grafting ratio and add on increase with the monomer concentration, whereas the conversion decrease. The hydrogen ions seem to be facilitating the grafting reaction up to a certain concentration and after this concentration seem to be retarding the process. The grafting ratio, add on, and conversion decrease with the sodium carboxymethylcellulose concentration. When increasing the time period from 60 to 90 min, the grafting parameters increase but decrease thereafter. Similarly, when increasing the temperature from 25 to 30°C, the grafting parameters increase and decrease thereafter. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4819–4825, 2006     

Low cost coal-based carbons for combined SO2 and NO removal from exhaust gas

The aim of this paper is to show how a cheap carbonaceous material such as low rank coal-based carbon (or char) can be used in the combined SO₂/NO removal from exhaust gas at the linear gas velocity used in commercial systems (0.12 m s⁻¹). Char is produced from carbonization and optionally activated with steam. This char is used in a first step to abate the SO₂ concentration at the following conditions: 100 °C, space velocity of 3600 h⁻¹, 6% O₂, 10% H₂O, 1000 ppmv SO₂, 1000 ppmv NO and N₂ as remainder. In a second step, when the SO₂ concentration in the flue gas is low, NO is reduced to N₂ and steam at the following experimental conditions: 150 °C, space velocity of 900 h⁻¹, 6% O₂, 10% H₂O, 0-500 ppmv SO₂, 1000 ppmv NO, 1000 ppmv NH₃ and N₂ as remainder.It has been shown that the presence of NO has no effect on SO₂ abatement during the first step of combined SO₂/NO removal system and that low SO₂ inlet concentration has a negligible effect on NO reduction in the second step. Moreover, this char can be thermally regenerated after use for various cycles without loss of activity. On the other hand, this regenerated char shows the highest NO removal activity (compared to parent chars, either carbonized or steam activated) which can be attributed to the activating effect of the sulfuric acid formed during the first step of the combined SO₂/NO removal system.     

基于互相关定位法的干涉仪分析与仿真

首次提出用时域互相关法处理Sagnac/Mach-Zehnder分布式光纤传感系统的干涉输出信号, 对扰动进行检测和定位。首先对Sagnac/Mach-Zehnder分布式光纤传感系统进行了扰动检测和定位的理论分析, 推导出扰动引起的干涉输出信号的表达式, 利用Bessel函数展开, 确定了该系统的两路干涉输出满足时域互相关的特性。在此基础上进一步分析了两路干涉信号的表达式, 提出基频定位法和微分定位法两种时域互相关方法处理干涉信号, 确定扰动位置。对两种扰动定位方法进行了Matlab仿真, 并通过实验在多个扰动位置多次验证了两种方法的正确性。     

基于Android平台的风机手持操作仪开发

基于Android平台开发了一款风机手持操作仪, 用于风机的日常监视、维护及设置。以TCP/IP协议和MODBUS协议为基础, 与风机主控系统实现基础数据通讯, 并通过交互界面上的触控操作来完成监视、维护及设置功能; 同时, 利用数据库技术实现对风机和用户数据的存储与管理, 并对用户关键信息进行加密处理以提升安全性。实际应用表明了该设备的可行性、有效性, 并且具备灵活、便携、经济等特点。     

Y-TZP/Al_2O_3超细粉末的研究

用共沉淀法制备了3mol％Y_2O_3-ZrO_2-20Wt％Al_2O_3超细粉末。利用热分析、X射线、粒度分析仪、透射电镜和扫描电镜等研究了粉末的性能。实验结果表明:制备的粉末组分均匀,颗粒粒度为10nm,粒度分布窄,团聚体尺寸小,烧结活性高。粉末的相组成为t-ZrO_2。烧结体显微结构致密细晶,具有优异的力学性能。     

JiTT—Blending Learning理念下的C++课程特色网站开发

Ji TT充分体现了Blending Learning的本质特点,把传统学习方式的优势和E-Learning(即网络化学习)的优势结合起来。Ji TT—Blending Learning理念下的C++课程特色网站突破了时间和空间的限制,将多种教学媒体、资源、情境混合,建立了课堂学习和网络学习相结合的模式,给教师和学生提供了一个方便、高效的通过网络教与学C++课程的平台。