Mechanical properties and thermal stability of rice husk ash filled epoxy foams

Mechanical properties and thermal stability of epoxy foams filled with white and black rice husk ash were studied. Epoxy foams were prepared from a commercial system and filled with different amounts of both the ashes (0, 6.8, 12.8, 18.0, and 22.7 wt %). The incorporation of both the ashes modified the final morphology of the foam, decreasing the average cell size and increasing the number of cells per volume unit. For all filler percentages used, the specific modulus and strength results showed that the white ash is more effective as reinforcing agent than the black ash. The initial degradation temperature was not affected by the content and type of ash used as the filler. The integral procedure decomposition temperature, weight loss, and char residue results were related to the ash type and atmosphere used in the thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Composition and morphology of char particles of fly ashes from industrial burning of high-ash coals with different reactivity

A comparative investigation of the composition and the morphology of char particles was conducted: char particles were recovered from fly ashes of two power stations in Russia from burning of high- and low-reactivity high-ash coals; the known results of studies of char particles generated in laboratory conditions from coals characterized according to the ASTM D388-98a standard were also used. The composition of organic and mineral components of different fraction char particles was studied. An inverse correlation between the content of the organic substance and the iron content in char particles was identified. The morphology of the char particles for the three main types (Cenospheric, Network and Solid) and the influence of coal reactivity and temperature on char morphology were investigated. The morphology of the mineral component of char particles of the two varieties of coals was also studied. It was shown that the high-temperature of industrial burning of Ekibastuz coal results in melting of the mineral substance and forming of micron-scale microspheres located in the lamellar porous structure of the carbon matrix.     

Characterization of sintered coal fly ashes

Çan, Çatala?z?, Seyitömer and Af?in-Elbistan thermal power plant fly ashes were used to investigate the sintering behavior of fly ashes. For this purpose, coal fly ash samples were sintered to form ceramic materials without the addition of any inorganic additives or organic binders. In sample preparation, 1.5 g of fly ash was mixed in a mortar with water. Fly ash samples were uniaxially pressed at 40 MPa to achieve a reasonable strength. The powder compacts were sintered in air. X-ray diffraction analysis revealed that quartz (SiO₂), mullite (Al₆Si₂O₁₃), anorthite (CaAl₂Si₂O₈), gehlenite (Ca₂Al₂SiO₇) and wollastonite (CaSiO₃) phases occurred in the sintered samples. Scanning electron microscopy investigations were conducted on the sintered coal fly ash samples to investigate the microstructural evolution of the samples. Different crystalline structures were observed in the sintered samples. The sintered samples were obtained having high density, low water adsorption and porosity values. Higher Al₂O₃ + SiO₂ contents caused to better properties in the sintered materials.     

粉煤灰少熟料水泥的研究

采用复合外加剂充分激发粉煤灰潜在活性，配制出早期强度较高的３２５＃少熟料水泥。本文介绍该水泥的配制原理与方法，分析了代替普通水泥配制建筑砂浆的可行性。     

Heat evolution of high-volume fly ash concrete

In this paper, the results of a laboratory investigation conducted with heat evolution of high-volume fly ash (HVFA) concrete are presented. Heat evolution of concrete was studied by measuring the temperature increase in concrete under adiabatic curing condition. Characteristic of heat evolution of fly ash concrete was found to be strongly dependent on the replacement level of fly ash and dosage of superplasticizer used to maintain workability. It was also found that using fly ash as cement replacement resulted in a reduction on the maximum temperature rise. Increasing the replacement level of fly ash caused lower temperature rise in concrete. Superplasticizer caused a delay in peak temperature rise time; this is taken as an indicator that high-dosage superplasticizer used in concrete caused retardation in hydration of cement. Concretes having similar ingredients showed similar peak temperature rise whether they are superplasticized or not.     

Preparation of ultra fine nickel-copper bimetallic powder for BME-MLCC

The preparation of ultra fine nickel-copper bimetallic powder with two-stage chemical reduction method was investigated. Reductive sugar and hydrazine hydrate were employed as reducing agent in different reductive stage, respectively. Reaction of CuSO₄·5H₂O with reductive sugar at 70 °C gives cuprous oxide and copper particles, then as-prepared mixture and nickelous hydroxide were reduced by hydrazine hydrate, and nickel-copper powder having excellent dispersibility was prepared. Influences of nickel added on composition and dispersibility of powder were studied. TG/DTG/DTA of nickel-copper powder, which is stable in room temperature, were discussed with thermal analyzer. Relation of nickel content to oxidation temperature was investigated. Ni-Cu bimetallic powder particles have a fully coated structure when nickel content is up to 30%. As-prepared nickel-copper powder was applied in base metal electrode-multilayer ceramic capacitor (BME-MLCC). The end termination has high adhesion force, fairly good densification, low resistivity, excellent solderibility behavior and resistance behavior to soldering.     

Handling of fine-particles by time-averaged particle driving method in plasmas

We developed a noble technique for the fine-particle handling in plasmas. In this method a pair of point electrodes are introduced in the plasma, to which positive pulses are applied alternatively. When the pulse repetition period is shorter than the particle response time, the particles feel only time-averaged force because of their large mass. Spatial profile of the equivalent potential of the time-averaged force varies from a circle to an ellipse with an increase in the local discharge at the electrodes. The particles are eventually transported toward a middle point between two point-electrodes, being almost independent of their initial positions. This method is quite effective for converging fine particles in the plasma.     

转炉煤气风机叶轮故障诊断及处理措施

对转炉煤气风机叶轮故障进行诊断,分析了故障产生的原因,提出了处理措施,延长了设备使用寿命。     

精细陶瓷注射成型工艺现状及发展动态

精细陶瓷注射成技术远比人们起初想象复杂的多，它已不再被人们认为是由塑料工业直接转变而来的技术。本文论述了陶瓷注射成型工艺的关键技术及其发展动态，提出了今后注射民面临的主要问题及需要加强的研究领域。