超细氧化锑阻燃剂的研究进展

综述了氧化锑阻燃剂的超细化、表面处理、复合功能化方面的发展方向和研究热点。     

无卤阻燃高抗冲聚苯乙烯的研制

研究了纳米改性氢氧化铝（CG-ATH）、改性聚苯醚（MPPO）和红磷母料对高抗冲聚苯乙烯（HIPS）的阻燃作用及SBS对所得阻燃材料的增韧作用，得到了具有良好阻燃性能和物理机械性能的复合材料。结果表明，CG-ATH和MPPO与红磷母料之间有很好的协效阻燃作用，配合使用可以使HIPS的垂直燃烧达到FV-0级，氧指数达到27．5％，但是所得复合材料的冲击强度较低。SBS对复合材料有很好的增韧作用，可以使冲击强度提高一倍以上，并且不影响复合材料的阻燃性能。     

高流动、高韧性阻燃ABS的研制

采用熔融挤出的方法制备了高流动、高韧性阻燃ABS。研究了阻燃剂、热塑性弹性体（SBS）、氯化聚乙烯（CPE）、聚氯乙烯（PVC）和纳米SiO2对ABS树脂力学性能和阻燃性能的影响。结果表明：溴-锑阻燃剂的用量在13．5％～18％时，ABS树脂可以达到很好的阻燃效果，但它同时也使ABS树脂的冲击强度下降很多；在阻燃ABS体系中加入SBS或CPE或PVC以及CPE与PVC的混合物，可以提高ABS树脂的冲击强度；采用CPE和PVC以及纳米SiO2等材料组成的配方体系，可以制得高流动、高韧性阻燃ABS树脂，该树脂具有良好的力学性能和阻燃性能。     

二(2,3—二溴丙基)烯丙基异三聚氰酸酯对丙烯酸系树脂的阻燃研究

用氧指数(LOI)、热失重(TGA)、微分热失重(DTG)等方法研究了二(2,3—二溴丙基)烯丙基异三聚氰酸酯对丙烯酸系树脂阻燃性的影响。结果表明二(2,3—二溴丙基)烯丙基异三聚氰酸酯对丙烯酸系树脂有一定的阻燃作用,与三氧化二锑配用时具有阻燃协同效应,阻燃效果较好,与磷酸三甲苯酯配用时没有协同效果。     

Computational fluid dynamics (CFD) analysis and experimental study for toxic hazardous waste destruction in the cavity incinerator

We undertook numerical and experimental studies to develop a better incineration method for the destruction of CC1₄. A phenomenological model for the turbulent reaction of CC1₄, including a flame inhibition feature, has been successfully incorporated into a commercial code, simulating the incineration processes of this compound. The gaseous flow solution was obtained using SIMPLEST, a derivative of Patankar’s SIMPLE algorithm, with a k-ε turbulence model. A modified fast chemistry turbulent reaction model was developed to describe the flame inhibition due to the presence of CC1₄, considering the corresponding burning velocity data of these mixtures. An experiment was carried out on a 5.2 kW laboratory scale, transportable, cavity-type incinerator, which warrants a sufficient residence time and effective turbulent mixing by the formation of a strong recirculation region in a combustor. To this end, the specific configuration of the incinerator was manufactured to consist of two opposing jets and a rearward facing step. The calculated data were in close agreement with the experimental data for the concentrations of major species, such as CCI₄ and HCl, together with the temperature profiles. The experimental test gave the desired DRE of above 99.99%.     

悬浮液进样-火焰原子吸收光谱法测定茶叶中的微量铬

将茶叶悬浮于琼脂胶体中制成悬浮液 ,直接喷入空气 -乙炔火焰 ,用火焰原子吸收光谱法测定茶叶中的微量铬 ,方法简便、快速、灵敏度和精密度高、测定结果与用灰化法处理样品一致 ,检验表明 ,两种样品前处理方法之间无显著性差异。相对标准偏差为 3.4 %～ 6 .1% ,加标回收率为 95 .7%～ 10 3.8 %。     

阻燃剂对软质聚氨酯泡沫燃烧特性的影响

利用锥形量热仪对添加了不同阻燃剂的软质聚氨酯泡沫，在25kW／m^2下，其热释放速率、产烟量、一氧化碳产生量、二氧化碳产生量和点燃时间等进行了试验研究。结果表明，含氯化铵的聚氨酯泡沫燃烧时热释放速率最小，仅是未经阻燃处理的聚氨酯泡沫的热释放速率的11．5％；含硫酸铵的聚氨酯泡沫的产烟量最少，仅是未经阻燃处理的聚氨酯泡沫的产烟量的6．4％；含氯化铵的聚氨酯泡沫燃烧时产生的一氧化碳和二氧化碳都是最少的，分别是未经阻燃处理的聚氨酯泡沫的2，4％和1．6％；点燃时间最长的是含四硼酸钠的聚氨酯泡沫，几乎是未经阻燃处理的聚氨酯泡沫的15倍，其它阻燃剂对聚氨酯泡沫的燃烧性能都有不同程度的影响。     

硅烷/钛酸酯复配偶联剂对水镁石粉/LDPE性能影响

比较了硬酯酸、硅烷、钛酸酯和铝酸酯四种表面处理剂对水镁石粉体表面改性活化效果,根据硅烷和钛酸酯对体系的影响优势用二者复配对该粉体进行表面处理,作为阻燃剂研究了它对LDPE体系的加工性能、拉伸性能及阻燃性能的影响。采用拉伸性能、氧指数将其和最大热释放速度等以及熔融指数对阻燃材料的性能进行了表征。结果表明:复配表面处理剂/水镁石粉/LDPE体系比单一表面处理剂/水镁石粉/LDPE体系的综合性能有显著提高,处理后的粉体填加量比单一表面处理剂改性的粉体填加量多20phr。     

Microstructure and properties of flame sprayed tungsten carbide coatings

This article reports on feasibility experiments carried out with oxy-acetylene spray system with various oxygen to fuel ratios using two different tungsten carbide powders and powder feeding methods, to evaluate the newly developed fused WC, synthesised by transferred arc thermal plasma method. Transferred arc thermal plasma method is more economical and less energy intensive than the conventional arc method and results in a fused carbide powder with higher hardness. The microstructure and phase composition of powders and coatings were analysed by optical and scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction. Carbon content of the powders and coatings were determined to study the decarburisation of the material during spraying process. Coatings were also characterised by their hardness and abrasive wear. The effects of metallurgical transformation and phase content are related to wear performance. The results demonstrate that the powders exhibit various degree of phase transformation during the spray process depending on the type of powder, powder feeding and spray parameters. The carbon loss during the spray process in excess of 45% resulted in reduced hardness and wear resistance of the coatings. Coatings with high amount of WC and W₂C along with FeW₃C showed higher wear resistance. Thus, coatings of high wear resistance can be produced using fused tungsten carbide powder with WC and W₂C phases, which can be economically synthesised by thermal plasma transferred arc method.     

基于BP神经网络锅炉炉膛火焰可视化监测方法研究

为了可视化监测炉膛火焰燃烧状况,提出一种基于级联前向BP神经网络模型的锅炉炉膛火焰可视化监测方法。通过比较选取级联前向BP神经网络作为炉膛温度预测模型,利用图像处理技术得到炉膛火焰辐射能图像对应二维温度场,并采用正则化方法重建炉膛火焰三维温度场。仿真结果表明,根据二维温度场可得火焰等温线走向和分布,根据三维温度场易得火焰中心分布及全炉最高温度点信息,实现锅炉运行控制和异常温度报警,满足燃烧诊断要求并实现炉膛火焰可视化监测。