Fabrication of Ormocer Containing Eu3＋ Ion and Their Optical Spectra

Eu3 ions were incorporated in sol and gel by a sol-gel processing using 3-glycidoxypropyltrimethoxysilane(CH2OCHCH2O(CH2)3Si(OCH3)3, GPTMS) and ethyl silicate (TEOS) as precursors. The basic chemical-physical properties such as DTA curve, FF-IR spectra and specific surface area were recorded. The characteristics of their optical spectra were measured and investigated. The results indicate that the emission intensity of Eu3 ion in ormocer is much higher and the global line width is wider than those in SiO2 gel. The relationship between the composition and structure of gels and the fluorescence intensity and width were discussed. The obtained ormocer shows good mechanical strength, which can be cut and polished in machine without broken.     

Research on the Distant Hybrids of Wheat Obtained via Low-Energy Ion-Beam Implantation

Abstract The whole DNA of soybean was implanted into four varieties of wheat of Zhongyu5, Huaiyin 9628, Wenyou 1, Jimai 5 respectively via ion-beam mediation. There were 5 plantsobtained whose protein content was higher than 18.5%, the highest one was 21.44%. There were 3plants obtained whose protein content was lower than 11.5%, the lowest one was 10.96%. We cansee that the whole DNA of soybean transformed into wheat via ion beam implantation can inducethe increase in wheat protein content dramatically. The result also shows that the transformationefficiency of different gene types of wheat receptor varies greatly that the implanting time has acertain effect on the efficiency of transformation.     

Transport properties in a mixed inorganic ion exchanger—zirconium phosphomolybdate—in comparison to its single salt counterparts

Amorphous inorganic ion exchangers zirconium phosphate, zirconium molybdate and zirconium phosphomolybdate have been prepared and characterized by elemental analysis, TGA, FTIR and surface area measurements. The protonic conductivity in these materials were determined at various temperatures and compared. It was found that the mixed material zirconium phosphomolybdate showed maximum conductivity at all temperatures.     

Tuning of electronic states in self-assembled InAs quantum dots using an ion implantation technique

We report the tunability of up to 150 meV of the ground state transition of self-assembled InAs quantum dots (QDs) using Mn ion implantation and subsequent annealing. Because of the exciton localization in the quantum dots, the photoluminescence efficiency (T=12K) of the quantum dot transition remains at 80% of its original value after implantation with a Mn dose of 1×10¹³ cm⁻²ions. Strong luminescence still remains at room temperature. At a high implantation dose (1×10¹⁵ cm⁻²) and rapid thermal annealing (700°C for 60s) about 25% of the QD luminescence intensity is recovered at T=12K.     

丙烯酸接枝聚丙烯纤维的结构与性能

本文研究了用化学引发剂引发丙烯酸接枝聚丙烯纤维的某些影响因素。红外光谱分析表明，丙烯酸接枝在聚丙烯大分子链的叔碳原子上。Ｘ－射线衍射和ＤＳＣ分析指出，纤维接枝后结晶度有所增加，接枝前纤维存在的β－变体转化成了α－变体，接枝纤维的吸湿性、离子交换容量和染色性随接枝率增加而增大。接枝纤维的力学性能有所下降。     

The multi-structure of oxidized-reduced tungsten carbide surface(s)

The XPS of bulk tungsten carbide, partially oxidized WC surfaces at 373 and 573 K as well as tungsten trioxide have been reported. Bulk WC has been prepared from WO₃ as a starting material in a mixture of CH₄ (20%) and H₂ (80%) at 1150 K for 4 h, while partially oxidized WC surfaces were prepared by oxygen chemisorption on a clean WC surface at 200 K, then the temperatures were raised to 373 and 573 K respectively. The XPS of a freshly prepared WC reveals the presence of a small amount of WO₃ on the surface and a slightly higher concentration in the bulk. The oxygen-exposed fresh WC surfaces and surfaces treated at temperatures higher than 373 K show the presence of WO₃ in a considerable quantity depending on the length and the treatment temperature. Ar⁺ bombardment of this partially oxidized surface reduces WO₃ to WO₂ and W(0), while WC is partially reduced to W(0). Isomerization reactions of alkanes on oxygen-exposed WC surface occurs in reality on a composite surface structure containing WC, WO₃, WO₂ and elemental W(0).     

Electrodeionisation 3: The removal of nickel ions from dilute solutions

The removal of nickel ions from dilute solutions using a process that combines an ion-exchange bed with electrodialysis has been studied. The main aspects include: the concentration of nickel ions in the diluate, the voltage over the cell and the current density distribution along the ion-exchange bed. The current density distribution provides insight into the state of the bed as it is simultaneously loaded with Ni²⁺ and regenerated with an electric potential difference applied perpendicular to it. A simple model is used to describe the state of the bed and the quantity of nickel removed from it as a function of time. Under specific conditions the precipitation of metal hydroxides is observed in the compartment containing the ion-exchange bed. The results show that hydroxide precipitation is related to the nickel concentration in solution and the electric potential gradient across the bed.     

上海市吴淞工业区大气PM2.5水溶成分的元素分析及细胞毒性研究

通过ICP-MS测定了上海市吴淞地区大气PM2.5水溶成分金属元素含量,通过四唑盐(MTT)测定细胞存活率,通过超氧化歧化酶(SOD)和丙二醛(MDA)两个指标测定细胞氧化损伤,琼脂糖凝胶电泳测定细胞内DNA损伤,流式细胞仪(Flow cytometry)检测细胞凋亡和周期等实验研究了大气PM2.5水溶成分的细胞毒性.实验结果表明:PM2.5可溶成分中Zn元素含量最高,PM2.5在一定浓度范围内能导致细胞死亡,引起细胞的氧化损伤,影响DNA的复制,阻碍细胞增殖,但没有诱导细胞凋亡.PM2.5中可溶金属离子对细胞毒性表现为联合作用.     

离子注入机的国内外现状

本文简要介绍了离子注入和器件的关系,概述了离子注入机的发展现状和趋势,初步探讨了我国离子注入机不能形成产业的原因。