静电驱动悬臂梁数模转换器设计、分析与模拟

提出了一种新型的微电子机械数模转换器 (MEMDAC)———静电驱动悬臂梁数模转换器 .与传统的静电驱动悬臂梁执行器相比 ,新的结构能更精确地控制梁的挠度 .文中给出了此MEMDAC的设计、分析和模拟过程 .有限元(FEA)分析表明此MEMDAC的最大输出位移为 1 5 1μm ,分辨率为 0 1μm ,其最大非线性误差为 0 0 3μm .     

ANALYSIS AND PROCESSING OF LMF－COSTAS STEPPED FREQUENCY RADAR SIGNAL

Linear Modulated Frequency (LMF) Costas Stepped Frequency Radar (SFR) signal is introduced. Its ambiguity function is derived and analyzed in detail and its feasibility is validated in theory. The scheme of the proposed signal processing is also presented. The results of theoretic analysis and simulation show that, by using the proposed signal and increasing the bandwidth of the total stepped frequency, the ambiguity sidelobe is well suppressed and the range-velocity coupling in the stepped frequency radar is also greatly weakened.     

内嵌闪存MCU的高性能多通道24位采集系统ADuC845

ADuC845是ADI公司新推出的嵌有单指令周期8052闪存MCU、带两路24位∑ -△A/D、双12位D/A以及两个灵活脉宽调制输出的高性能24位数据采集与处理系统芯片。该芯片的数据处理速度达12MIPS,且设计简单 ,噪声低 ,非常适用于精密仪器仪表。文中详细介绍了该芯片的功能特点和工作原理 ,给出了该芯片的应用方法。     

Development of a fast neutron radiography converter using wavelength-shifting fibers

A fluorescent converter for fast neutron radiography (FNR) comprising a scintillator and hydrogen-rich resin has been developed and applied to electronic imaging. The rate of the reaction between fast neutrons and the converter is increased by thickening the converter, but its opaqueness attenuates emitted light photons before they reach its surface. To improve the luminosity of a fluorescent converter for FNR, a novel type of converter was designed in which wavelength-shifting fibers were adopted to transport radiated light to the observation end face. The performance of the converter was compared with that of a polypropylene-based fluorescent converter in an experiment conducted at the fast-neutron-source reactor YAYOI in the University of Tokyo.     

基于片上DC-DC的CMOS光接收机前置放大器

利用CSMC 0.6μm CMOS工艺,设计了基于片上DC-DC转换器的光接收机前置放大器。电路采用可调跨阻放大器与片上DC-DC结构,有效地克服了单端跨阻放大器易受电源波动的干扰,并解决了高灵敏度与低失真相互矛盾的问题。模拟结果表明,输入动态范围为83 dB(峰-峰值=0.2μA~3 mA),等效输入电流噪声为1.2 pA/Hz(155 MHz),可稳定工作在155 Mb/s速率上;在5 V电源电压下,功耗为95 mW。     

光通信技术讲座--(五):WDM系统光节点器件

介绍WDM系统光节点所用到的器件,如波长转换器、光分插复用器及其使用的光隔离器和光环形器.     

东安石灰石矿爆破降震新技术

本文介绍了湘钢东安石灰石矿和长沙矿冶研究院合作进行降震技术试验研究的结果．异步分区起爆综合降震技术既可显著降震，由于振动频率提高，降低了周围民房的地震效应，减轻了房屋的摆动程度．     

无刷双馈电机极数的选择

将三种极对数的无刷双馈电机(BDFM)与一台绕线转子感应电机进行比较研究。用双向变频器对BDFM进行速度控制，做到减小额定值，并可以实现对BDFM的转速和功率因数进行控制。本文说明了选择变频器的额定值和BDFM的极对数的方法。     

氨合成塔出口氨含量偏低原因分析及对策

阐述UHDE合成塔运行现状 ,分析氨净值达不到设计值的原因 ,提出相应的解决措施     

转炉负能炼钢攻关对策

通过介绍转炉炼钢工艺流程及工序能耗分析，为提高转炉煤气回收量及降低电耗采取了一系列攻关措施，实现了转炉负能炼钢，取得了一定经济效益。