嘉陵江上游区滑坡泥石流预警信息系统初步研究

本文在嘉陵江上游区滑坡泥石流预警网络的基础上,结合我国及嘉陵江上游区的具体情况和经济承受能力,提出了嘉陵江上游区滑坡泥石流预警信息系统的基本结构、内容、运行原理。此系统的建立对于当地的减灾、防灾和经济发展具有重要意义。     

Obtaining Characteristic 4f–4f Luminescence from Rare Earth Organic Chelates

We report a study of a series of heavy rare earth tris‐8‐hydroxyquinolines (REQ₃s), using UV‐visible absorption spectroscopy, infrared absorption spectroscopy, and photoluminescence (PL) measurements. We show that the heavy REQ₃s are all chemically similar to each other and to aluminium tris‐8‐hydroxyquinoline, at least in terms of the ligand behavior. Characteristic rare earth 4f–4f luminescence is only observed for ErQ₃ and YbQ₃ due to the relatively low energy of the ligand triplet state. We show that a triplet transfer mechanism cannot be responsible for the observed Yb 4f–4f luminescence observed in YbQ₃. Instead, an internal chemiluminescent process is shown to be energetically favorable. The thin film PL spectra of all the heavy REQ₃s are dominated by triplet emission, except for that of ErQ₃, for which transfer to the Er³⁺ ion represents an efficient alternative. The PL spectra of powder samples, which would be expected to consist of approximately equal amounts of both isomers, are dominated by singlet emission. This is in contrast to the results from the thin films, and suggests that the isomer which predominates in the thin films has a much higher intersystem crossing rate than the other isomer.     

变频调速器在桥式抓斗吊车中的应用

论文主要介绍了电机的调速方法、变频器的工作原理以及日本FRNIC500G7型变频器在桥式抓斗吊车上的应用，并分析了使用绕线式电机调速与鼠笼式电机变频调速之间的优缺点。     

Dependence of electrical properties on interfacial layer of Ta2O5 films

The change in the thickness and chemical states of the interfacial layer and the related electrical properties in Ta₂O₅ films with different annealing temperatures were investigated. The high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy analyses revealed that the 700 °C-annealed Ta₂O₅ film remained to be amorphous and had the thinnest interfacial layer which was caused by Ta-silicate decomposition to Ta₂O₅ and SiO₂. In addition, the electrical properties were improved after annealing treatments. Our results suggest that an annealing treatment at 700 °C results in the highest capacitance and the lowest leakage current in Ta₂O₅ films due to the thinnest interfacial layer and non-crystallization.     

The distribution of anthocyanins in grape skin extracts of port wine cultivars as determined by high performance liquid chromatography

The distribution of anthocyanins in methanolic skin extracts of 16 grape cultivars used for port wine production and grown at five sites in the Douro Valley in Northern Portugal has been assessed by high performance liquid chromatography. Results are confined to the seven most readily separated and identified anthocyanins and are expressed as percentages of their total (88–99% of the total integrated area). Anthocyanins based on malvidin (Mv) predominated. Of these, Mv 3-glucoside was the major pigment (33–60%), being exceeded by Mv 3-p-coumarylglucoside (2–51%) in only two cultivars; Mv 3-acetylglucoside (1–15%) was consistently the lowest. Peonidin 3-glucoside (1–27%) was prominent in four cultivars, but delphinidin 3-glucoside (1–11%), petunidin 3-glucoside (2–11%) and cyanidin 3-glucoside (trace-6%) were of low proportions throughout. The ratio Mv 3-acetylglucoside/total Mv glucosides appeared characteristic of cultivar, independent of site, and a useful aid to identification of grape cultivars. The coloured pulp of some cultivars contained peonidin 3-glucoside as a major component, present in greater proportions than in the skin; the percentage of Mv 3-p-coumarylglucoside was lower in pulp than in skin. The identities of six of the seven anthocyanins were confirmed by fast atom bombardment mass spectrometry and the structures of the Mv derivatives were determined by nuclear magnetic resonance. The formation of formyl and acetyl anthocyanin artefacts is described.     

二元稀土系AB5型贮氢电极合金的放电容量与晶胞体积和4f电子浓度的关系

制备了6个系列通式为AαA‘1-αB5的RE(NiCoMnTi)5贮氢电极合金(其中，AαA‘1-α为La，Ce，Pr，Nd4个元素中任意2个的组合)，测定了它们在100次循环中的最大放电容量Cmax及部分合金的晶胞体积Vcell．结果表明：Cmax主要由Vcell决定，Cmax先随Vcell的增大而增加，在Vcell≈85．66x10^-^3。nm^3时达到一极大值，然后又随Vcell的增大而减小；同时，Cmax还与4f电子浓度ne4f／naRE有关，A侧具有相同4f电子浓度的合金其Cmax随4f电子浓度的变化趋势相似．     

Microhardness and corrosion behavior in CrN/electroless Ni/mild steel complex coating

The electroless nickel–phosphorous (Ni–P) coating was chosen as an interlayer to improve the properties of the CrN/mild steel (MS) composite. A hypophosphite-reduced acid solution was used to first deposit electroless Ni–P onto MS substrates, and then the CrN overlayer was deposited by reactive r.f. magnetron sputtering onto the electroless Ni–P modified substrate. The electroless Ni–P layer crystallizes with the precipitation of a Ni₃P phase during r.f. sputtering, and thus a coating–substrate composite of CrN/Ni–Ni₃P/MS is formed. The electroless Ni–P coating increases the surface hardness of the steel substrate to more than three times. The surface hardness of the CrN coating modified by an electroless Ni–P interlayer exhibits a hardness higher than 2000 HK_0.015. The usual substrate effect on the microhardness of the coatings is nearly eliminated with the complex coating feature, and a significant enhancement of surface hardness in the coating assembly is achieved. The corrosion tests indicate that the Ni–Ni₃P/MS configuration exhibits a more positive E_corr value (i.e. less electronegative) than CrN/MS and the corresponding potential curve is shifted toward the low-current side, indicating a better anti-corrosion performance. Through comparison of the E_corr values and the polarization curves, it is demonstrated that the CrN/Ni–Ni₃P/MS composite exhibits significantly higher corrosion resistance than the Ni–Ni₃P/MS and CrN/MS coating configurations.     

应用人工神经网络理论建立热粘塑性材料的本构关系

本文将人工神经网络（ＡＮＮ）用于建立热粘塑性材料的本构关系，意在探索出一种描述材料变形力学行为的新方法。文中给出了应用人工神经网络建立热粘塑性材料本构关系的ＢＰ模型和学习算法过程，并应用于４５号钢在高温和高速变形条件下的流动应力计算。计算结果与实测结果比较表明，二者吻合良好。因此，应用人工神经网络建立热粘塑性材料的本构关系具有重要的工程应用价值。     

Fabrication and characteristics of novel microelectronic structures fabricated by plasma-based techniques

A number of novel microelectronic structures have recently been produced using plasma-based techniques such as plasma immersion ion implantation (PIII) and this paper describes the recent progress made in this area in our laboratory. Conventional silicon-on-insulator (SOI) substrates utilizing a buried silicon dioxide layer suffer from self-heating effects as device dimensions shrink to the deep-submicrometer regime. Novel SOI structures using dielectric materials with higher thermal conductance such as aluminum nitride and diamond-like carbon have been produced. In the area of high-k (dielectric constant) thin films, plasma nitridation conducted on materials such as zirconium dioxide improves the recrystallization and interfacial properties. In the conventional Smart-Cut™ or ion-cut technique, high-energy hydrogen implantation is performed to effect layer transfer. Low-energy (several hundred eVs) plasma hydrogenation has recently been conducted in conjunction with damage engineering to produce wafer splitting for layer transfer. This new process allows more flexible control of the depth of hydrogen accumulation and the location of layer cleavage.     

Synthesis and characterization of poly(ϵ‐caprolactone)‐b‐poly(ethylene glycol) block copolymers prepared by a salicylaldimine‐aluminum complex

A series of poly(?‐caprolactone)‐b‐poly(ethylene glycol) (PCL‐b‐PEG) block copolymers with different molecular weights were synthesized with a salicylaldimine‐aluminum complex in the presence of monomethoxy poly(ethylene glycol). The block copolymers were characterized by ¹H NMR, GPC, WAXD, and DSC. The ¹H NMR and GPC results verify the block structure and narrow molecular weight distribution of the block copolymers. WAXD and DSC results show that crystallization behavior of the block copolymers varies with the composition. When the PCL block is extremely short, only the PEG block is crystallizable. With further increase in the length of the PCL block, both blocks can crystallize. The PCL crystallizes prior to the PEG block and has a stronger suppression effect on crystallization of the PEG block, while the PEG block only exerts a relatively weak adverse effect on crystallization of the PCL block. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007