叶绿素衍生物─CPD_4在人血清中的激发和发射荧光谱

叶绿素衍生物４号（ＣＰＤ４）是一种新型中药光敏剂，本文研究了不同浓度的ＣＰＤ４分别在含１０％不同血型人血清的生理盐水中以及纯生理盐水中的激发和发射荧光光谱，并对结果进行了分析，结论对ＣＰＤ４在光动力诊断恶性肿瘤的临床应用具有一定的指导意义．     

叔丁醇氧化产物的气相色谱分析

介绍了用气相色谱分析叔丁醇两步氧化制甲基丙烯酸液相产物的组成，该分析方法能够分析液相产物中的醛类，酮类和酸类化合物共计9个组分，C2－C4有机酸无记忆效应，其色谱峰不拖尾，该分析方法的相对标准偏差≤8．5％，回收率在94．5％－103．7％之间，是一种快速，准确，操作简单的分析方法。     

ZrO_2（Y－TZP）－Si_3N_4复合材料中抑制ZrN生成研究

研究了气氛加压烧成ＺｒＯ２（Ｙ－ＴＺＰ）－Ｓｉ３Ｎ４复合材料中抑制ＺｒＮ生成工艺问题，相组成分析表明：无论添加２０ｗｔ％工业ＺｒＯ２或者Ｙ－ＴＺＰ（３ｍｏｌ％Ｙ。Ｏ。）的氯化硅复合材料，在低于１８５０℃，３ＭＰａｋ气压力下烧成，表面无ＺｒＮ生成．通过加入有效的烧结助剂（Ｙ。Ｏａ＋ＡＩ。Ｏｓ）、增加埋粉中ＳＩＯ分压以及增加保护气氛氮气压力，适当的烧成条件等工艺措施可有效地抑制ＺｒＮ的生成．实验还证实了ＺｒＮ很容易氧化，含有ＺｒＮ的ＺｒＯ。（Ｙ－ＴＺＰ）－ＳｉｓＮ。复合材料试样经９００℃，０．ｓｈ热处理已粉碎性裂开．     

汉白玉废料制备球形纳米碳酸钙的研究

将汉白玉废料通过高温煅烧分解得到氧化钙,再用氯化铵循环液溶解氧化钙制得碱性氯化钙溶液,除去其中的Mg、Fe等杂质得到氯化钙精制溶液,利用化学方法合成得到碳酸钙粉体.用X射线衍射(XRD)、扫描电镜(SEM)及激光粒度分析仪、白度仪对碳酸钙产品的晶相组成、形貌、粒度分布、白度及化学组成进行了分析,所得产品为纯度达98.5%以上、白度达97%以上、平均粒度为80nm左右的球形纳米级碳酸钙.并对碳化反应速率及合成球形纳米碳酸钙的影响因素进行了分析.实验中循环使用NH4Cl,氨的排放量小,减少了环境污染.     

Electrostatic polymer processing of isotactic poly(4-methyl-1-pentene) fibrous membrane

Isotactic poly(4-methyl-1-pentene) (P4M1P) is a widely used polymer in industrial applications and specifically, in medical products. Producing micro- or nanofibers would expand the usefulness of P4M1P to a broad range of medical applications. The choice and quality of solvent for the solution used for electrospinning can have a dramatic effect on the spinnability of fibers and on their morphological appearance. In this study, four solvent systems: cyclohexane, cyclohexane/acetone mixture, cyclohexane/dimethyl formamide (DMF) mixture and cyclohexane/acetone/DMF mixture have been investigated. As demonstrated by FE-SEM, electrospun fibers with different morphologies including round, twisted with a roughened texture, curled and twisted-ribbon shapes were formed. The fiber shape and morphology depended strongly on the type and amount of non-solvent used.     

4-(N-异丙氨基)-苯甲酸的合成研究

对分子中既具有吸电子基,又具有给电子基的化合物4-(N-异丙氨基)-苯甲酸进行了合成,具体的合成步骤和反应条件为:50mL水中加入3g(0.022mol)对氨基苯甲酸,再加入无水碳酸钾1.5g(0.011mol),调整pH约为8,使成羧酸盐,经过滤后加入2-溴丙烷2.5g(0.02mol),加热回流12h,直至下层的2-溴丙烷基本消失,冷却,得灰白色固体,重结晶并用活性炭脱色,得白色晶体4-(N-异丙氨基)-苯甲酸。     

Studies on the corrosion behavior of cerium-implanted zircaloy-4 with GAXRD

In order to study the influence of cerium ion implantation on the aqueous corrosion behavior of zircaloy-4, specimens were implanted by cerium ions with a fluence range from 1×10¹⁶ to 1×10¹⁷ ions/cm² at maximum 150°C, using MEVVA source at an extracted voltage of 40 kV. The valence and elements penetration distribution of the surface layer were analyzed by X-ray photoelectron spectroscopy (XPS) and auger electron spectroscopy (AES) respectively. Glancing angle X-ray diffraction (GAXRD) was employed to examine the phase transformation due to the cerium ion implantation in the oxide films. Three-sweep potentiodynamic polarization measurement was employed to value the aqueous corrosion resistance of zircaloy-4 in a 1 N H₂SO₄ solution. It was found that a significant improvement in the aqueous corrosion behavior of zircaloy-4 implanted with cerium ions compared with that of the as-received zircaloy-4. The improvement effect will declined with raising the implantation fluence. The bigger is the fluence, the less is the improvement. Finally, the mechanism of the corrosion behavior of the cerium-implanted zircaloy-4 is discussed.     

MC68HC908QT4单片机键盘模块原理及应用

本文分析了MC68HC908QT4单片机键盘模块的结构原理和寄存器功能，结合其键盘模块的特点，给出了具体的键盘应用实例。     

Neutron Stress Measurement of W‐Fiber Reinforced Cu Composite

Stress measurement methods using neutron and X‐ray diffraction were examined by comparing the surface stresses with internal stresses in the continuous tungsten‐fiber reinforced copper‐matrix composite. Surface stresses were measured by X‐ray stress measurement with the sin²ψ method. Furthermore, the sin²ψ method and the most common triaxal measurement method using Hooke's equation were employed for internal stress measurement by neutron diffraction. On the other hand, microstress distributions developed by the difference in the thermal expansion coefficients between these two phases were calculated by FEM. The weighted average strains and stresses were compared with the experimental results. The FEM results agreed with the experimental results qualitatively and confirmed the importance of the triaxial stress analysis in the neutron stress measurement.     

复合射孔枪枪身材料动态本构关系的试验研究

为确定复合射孔枪枪身材料32CrMo4钢在井下高温、高加载率工作环境下的动态性能,利用MTS试验机和分离式Hopkinson冲击压杆装置做了应变率为0.001、1000和3000/s,温度为294、373、473和573K的单轴动态压缩试验,得到32CrMo4钢各组温度及应变率下的流动应力-应变曲线。拟合得到该钢Johnson-Cook本构关系模型所需的5个参数,模型拟合曲线与试验曲线吻合。