Cold Crystallization of PLLA Studied by Simultaneous SAXS and WAXS

Summary: The cold crystallization process of initially amorphous poly(L ‐lactic acid), PLLA, with two different molecular weights, during a heating at 2 °C/min, was investigated by DSC and time‐resolved simultaneous SAXS and WAXS, using synchrotron radiation. Equatorial scans of the isotropic 2D‐SAXS patterns showed that the average Bragg long period (L_B) of PLLA samples was approximately constant with the development of cold crystallization up to a temperature that corresponded to a melt/re‐crystallization process that took place before the nominal melting peak seen by DSC. L_B values were found to be higher for the high molecular weight material. This was in accordance with the higher melting temperature observed in the high molecular weight PLLA that implied the existence of thicker lamellae. WAXS results showed that the molecular weight did not apparently affect the crystal form and the final degree of crystallinity of PLLA. The Avrami parameters from WAXS and DSC were consistent, showing that the non‐isothermal cold crystallization of the two PLLA samples corresponded mainly to a three‐dimensional growth, although an imperfect crystallization process was involved at early times. The crystallization rate of PLLA, observed both by WAXS and DSC, decreased with increasing molecular weight.

SAXS profiles of PLLA2 as a function of temperature. The inset shows the 2D‐SAXS pattern obtained at 180 °C.     

Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007     

Synthesis of copolymers of tert‐butyl vinyl ether with maleic and citraconic anhydrides

In the present study, the effects of charge‐transfer complex formation and intramolecular fragmentation (side‐chain lactonization) in radical copolymerization of tert‐butyl vinyl ether (t‐BVE) with anhydrides of maleic (MA) and citraconic (CA) acids and the structure–thermal behavior relationships of the resulting copolymers were examined using the ¹H‐NMR, FTIR, DSC, and TGA analysis methods. It was shown that copolymerization under the chosen conditions proceeded through intramolecular fragmentation with the formation of γ‐lactone units. Side‐chain fragmentation of t‐BVE–MA and t‐BVE–CA copolymers also was confirmed by TGA and DSC analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2455–2463, 2006 2006     

液氨贮存设计分析

氨是生产含氮肥料及尿素的基本原料，为确保原料供应，必须设置其贮存设施。介绍了常温中压、降温低压和低温常压三种不同的液氨贮存工艺及其特点，并以某大型氨站设计为例，分析了液氨贮存工艺流程、主要设备、材料的选型和工艺参数的确定。     

酯化反应偶联渗透汽化膜过程模型(Ⅰ)催化剂的影响

1 INTRODUCTION In former report, the kinetic model for anesterification process coupled by pervaporation wasestablished and the modeling result agreed well withthe experimental result[1].     

One‐step synthesis and ring‐opening polymerization of novel macrocyclic(arylene multisulfide) oligomers

A series of macrocyclic(arylene multisulfide) oligomers were synthesized under high dilution conditions by reacting diphenyl ether/diphenyl/diphenyl disulfide/diphenyl methane with dichloro disulfide in the presence of a trace amount of iron powder by a one‐step reaction. From MALDI‐TOF mass spectra, it was established that the repeating units of the cyclization ranged from two to seven and the unit of macrocyclic(arylene multisulfide) oligomers had one to seven sulfur atoms. The macrocyclic oligomers readily underwent ring‐opening polymerization in the melt, resulting in linear, high molecular weight polymultisulfides. DSC thermograms demonstrated that the four polymultisulfides, derived from the macrocyclic(arylene multisulfide) oligomers, are amorphous in nature. The macrocyclic(arylene multisulfide) oligomers and polymers were analyzed by MALDI‐TOF‐MS, IR, HPLC, NMR, DSC, and TGA methods. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 735–741, 2004     

Biobased thermosets from the free‐radical copolymerization of conjugated linseed oil

New polymeric thermosets were prepared through the bulk free‐radical copolymerization of 100% conjugated linseed oil, acrylonitrile, and divinylbenzene. Under the appropriate reaction conditions and with the appropriate curing sequence, 61–96 wt % of the oil was incorporated into the crosslinked thermosets. The resulting yellow, transparent thermosets varied from being soft and flexible to being hard and brittle. Dynamic mechanical analysis and thermogravimetric analysis showed that these thermosets had good mechanical properties and thermal stability. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 979–985, 2007     

Gas Hold‐Up in Stirred Tank Reactors in the Presence of Inorganic Electrolytes

Gas hold‐up (?_G) in air‐aqueous electrolyte solutions in stirred tank reactors (STR) is correlated using a relative gas dispersion parameter, N/N_cd and a surface tension factor (STF), (c/z)(dδ/dc)². For electrolyte concentration below transition concentration (c_t) a single correlation in the form of ?_G = f(N/N_cd, vvm, STF) shows good agreement with gas hold‐up data over a wide range of system and operating conditions. Above ct no effect of STF on gas hold‐up is observed and the correlation obtained is of the form ?_G = f(N/N_cd, vvm). Data available in the literature on large STR show good fit with the proposed correlation.     

Liquid-phase stereoselective thymol hydrogenation over supported nickel catalysts

The stereoselective hydrogenation of thymol was studied in liquid phase over several nickel catalysts, modified by coimpregnation of inorganic compounds containing chlorine. The total activity of all catalysts studied was decreased and was on the same order of magnitude, indicating that chlorine even after reduction remains on the surface and is responsible for the poisoning effects. Such blocking of accessible sites results in similar reaction rates for the catalysts studied. Selectivity and stereoselectivity to menthols and menthones changed significantly. The modifiers could influence the rate of keto-enol transformations, which is thought to be the key selectivity and stereoselectivity governing step.     

Effect of Co2+, Ni2+, Cu2+, or Zn2+ on properties of polyaniline nanoparticles

Uniform polyaniline (PANI) nanoparticles with typical sizes of about 50 nm were electropolymerized on indium tin oxide surfaces in the presence of Co²⁺, Ni²⁺, Cu²⁺, or Zn²⁺. According to shaping theory, we first suggest the reason forming PANI spherical particles. Their conductivity, UV‐vis spectra, FTIR spectra, X‐ray diffraction, and thermogravimetric analysis were investigated. The conductivities and crystallinity of PANI doped with these ions are higher than those of PANI doped with HCl (PANI/HCl). Both UV‐vis absorption spectra and FTIR spectra indicate the interactions between Co²⁺, Ni²⁺, Cu²⁺, or Zn²⁺ and PANI chains. TG analysis also shows that the thermal stability of PANI doped by Co²⁺, Ni²⁺, Cu²⁺, or Zn²⁺ is lower than that of PANI/HCl. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007