环氧胶粘剂及其胶接界面热氧老化机理研究

采用红外光谱、X射线光电子能谱和扫描电镜对环氧胶粘剂的热氧老化机理进行了研究。同时,对环氧胶接结构进行了力学性能分析,研究了热氧环境对其力学性能退化的影响。结果表明,环氧胶粘剂在热氧加速老化中发生的化学反应主要有后固化反应和氧化反应。热氧老化过程中,环氧胶中的羟基被氧化为醛基化合物,亚甲基被氧化为酰胺。热氧加速老化后的力学性能表明,环氧胶材料本体的耐老化性能好,界面粘接强度具有较好的稳定性。     

自支撑氮掺杂石墨烯纸柔性电极的制备及其储锂性能的研究

以氧化石墨烯(GO)为原料,尿素为氮掺杂剂,采用固/气界面水热反应的方式,即在反应釜内将GO抽滤得到的氧化石墨烯纸(GOP)与尿素分解产生的氨蒸气相互作用,成功制备出自支撑氮掺杂石墨烯纸(NGP)。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、拉曼光谱(RS)、X射线光电子能谱(XPS)和电化学测试对样品进行形貌结构及电化学性能的表征。测试结果表明:水热条件下尿素能有效地实现氧化石墨烯纸的氮掺杂,氮掺杂量为7.89%;氮掺杂石墨烯纸在100mA/g和500mA/g的电流密度下,充放电循环100周之后,放电比容量可分别保持在288mAh/g和190mAh/g。采用改进的固/气界面水热反应法制备的氮掺杂石墨烯纸较未掺杂石墨烯纸可逆比容量提高了近2.5倍,具有良好的循环稳定性,可为制备高性能的柔性锂离子电池负极材料提供新方法。     

Nanoconfined Nickel@Carbon Core–Shell Cocatalyst Promoting Highly Efficient Visible‐Light Photocatalytic H2 Production

The realization of large‐scale solar hydrogen (H₂) production relies on the development of high‐performance and low‐cost photocatalysts driven by sunlight. Recently, cocatalysts have demonstrated immense potential in enhancing the activity and stability of photocatalysts. Hence, the rational design of highly active and inexpensive cocatalysts is of great significance. Here, a facile method is reported to synthesize Ni@C core–shell nanoparticles as a highly active cocatalyst. After merging Ni@C cocatalyst with CdS nanorod (NR), a tremendously enhanced visible‐light photocatalytic H₂‐production performance of 76.1 mmol g^?1 h^?1 is achieved, accompanied with an outstanding quantum efficiency of 31.2% at 420 nm. The state‐of‐art characterizations (e.g., synchrotron‐based X‐ray absorption near edge structure) and theoretical calculations strongly support the presence of pronounced nanoconfinement effect in Ni@C core–shell nanoparticles, which leads to controlled Ni core size, intimate interfacial contact and rapid charge transfer, optimized electronic structure, and protection against chemical corrosion. Hence, the combination of nanoconfined Ni@C with CdS nanorod leads to significantly improved photocatalytic activity and stability. This work not only for the first time demonstrates the great potential of using highly active and inexpensive Ni@C core–shell structure to replace expensive Pt in photocatalysis but also opens new avenues for synthesizing cocatalyst/photocatalyst hybridized systems with excellent performance by introducing nanoconfinement effect.     

氮流量比对磁控溅射(CoCrFeNi)Nx高熵合金薄膜的组织和性能的影响

采用直流磁控溅射法制备(CoCrFeNi)N_x高熵薄膜,研究了氮流量比对薄膜的力学性能和电磁性能的影响。结果表明,在不同氮流量比条件下制备的(CoCrFeNi)N_x薄膜,都具有致密的组织、简单的FCC结构并呈现(200)择优取向。随着氮流量比从10%提高到30%,薄膜的硬度和弹性模量随之增大,其最大值达到14 GPa和212 GPa;电阻率基本上呈增大的趋势,最大值达到138 μΩ?cm;饱和磁化强度和磁导率随之减小,薄膜饱和磁化强度最高为427.43 emu/cm³。薄膜的矫顽力约为0。     

基于DSP的变频器控制人机交互接口设计

介绍了一种基于DSP的变频器控制接口电路;在硬件方面,以TMS320LF28035DSP为控制器,基于其EVM板为扩展数字接口和显示模块;软件方面,使用定时器中断对键盘进行管理,在节约DSP硬件资源的同时完成人机交互;电路达到了通用变频器对于数据输入和输出显示的使用要求,利用串并行相互转换芯片起到了节约硬件资源的作用,为变频器实现更多控制功能奠定了基础;与此同时,减少了DSP控制引脚在人机接口方面的数量,增强了电路的可靠性。     

Thermal Expansion of Hybrid Chiral Mechanical Metamaterial with Patterned Bi-Strips

Hybrid chiral mechanical metamaterials with center squares connecting by bi-layer strips (bi-strips) with patterned interfaces are designed and fabricated via multimaterial 3D printing. Due to the thermal mismatch between the bi-strips and the chirality-induced rotation, the designs will undergo either thermal expansion or shrinkage under constant temperature increase, resulting in widely tuned overall thermal expansion coefficients (CTEs) for the chiral mechanical metamaterials. Analytical models of both the bi-strips with arbitrary dissimilar interface morphology and the chiral designs under temperature change are developed to predict the curvature of the bi-strips and the overall CTEs of the chiral designs. Two design regions with opposite trends are observed and explored. The models are verified via systematic finite element (FE) simulations and experiments on 3D-printed specimens. This investigation enlarges the design space of chiral mechanical metamaterials for achieving desired CTEs in a wide range.     

A review on mechanisms and recent developments of nanomaterials based carbon fiber reinforced composites for enhanced interface performance

Carbon fiber reinforced composites have attracted lots of attention in many fields. However, on account of the poor infiltration of resin to carbon fiber, the weak interface performance between fiber and resin has been restricting the interface properties of composites. In recent progress, the review attaches more importance to the introduction of the third phase monomer, which mainly uses physical and chemical methods to assemble nanomaterials (such as carbon nanotubes, graphene, etc.) on the carbon fiber surface to modify the interface structure of the carbon fiber reinforced composites, and all of them have been demonstrated in this paper. Furthermore, the effects of introducing nanomaterials on the structure of the fiber/resin interface and the relationship between multi-scale interface structure and properties have been investigated. It can be seen that the design idea of researchers mainly uses one or more theories to improve the interface properties of carbon fiber reinforced composites, such as transition layer, chemical bonding, mechanical interlocking, infiltration, diffusion, and adsorption. In brief, this work provides some novel insights for the preparation of carbon fiber reinforced composites with excellent interlaminar shear strength.     

大型煤炭建工集团管理信息系统

介绍了中平能化建工集团管理信息系统的总体设计方案、网络及软件平台架构、子系统功能模块组成等。该系统采用智能客户端网络架构和万向接口平台技术,实现了建工企业的全部专用功能以及各个子系统之间的信息交互,使得各机构之间能够有效地协同运作。